News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

BH-5103P: Propylene Oxide Glycerin (3PO-GPT)

BH-5103P: Propylene Oxide Glycerin (3PO-GPT)

BH-5103P (3PO‑GPT) is a bio-based propoxylated glycerin, an important intermediate for synthesizing reactive diluents. It reacts with acrylic or methacrylic acids to produce UV‑curable monomers, which are used in UV‑cured coatings and inks. This triol features a propoxy chain and a branched structure, imparting exceptional flexibility to the molecule; it is also suitable for the synthesis of rigid polyurethane foams, rigid adhesives, and polyurethane sealants. Additionally, it can be employed as a plasticizer, lubricant, dispersant, and more.

11

2026

/

07

BH-5203E: Ethoxylated Trimethylolpropane (3EO-TMP)

BH-5203E: Ethoxylated Trimethylolpropane (3EO-TMP)

BH-5203E (3EO‑TMP) is a triethoxylated trimethylolpropane and an important intermediate in the production of UV monomers. It reacts with acrylic acid or methacrylic acid to yield UV monomers, which are used in UV‑curable coatings and inks. This triol is also employed in rigid polyurethane foams, polyurethane adhesives, waterborne polyurethanes, alkyd resins, TPU thermoplastic elastomers, and other applications. In addition, it can serve as a surfactant, plasticizer, lubricant, and dispersant.

11

2026

/

07

BM2101: Bis(2-ethylhexyl) bisphenol A diacrylate (10EO-BPADA)

BM2101: Bis(2-ethylhexyl) bisphenol A diacrylate (10EO-BPADA)

10EO‑BPADA is an ethoxylated bisphenol A diacrylate with a high ethoxy content and a conjugated benzene ring structure, offering key advantages such as low skin irritation, high refractive index, rapid curing speed, and low cure shrinkage. The cured coating exhibits excellent mechanical strength, heat resistance, and chemical stability, making it suitable for a wide range of applications, including optical materials, coatings, inks, adhesives, electronic encapsulation, and 3D printing.

11

2026

/

07

BM2101M: Bis(2-ethoxy)bisphenol A dimethyl acrylate (10EO-BPADMA)

BM2101M: Bis(2-ethoxy)bisphenol A dimethyl acrylate (10EO-BPADMA)

10EO‑BPADMA is an ethoxylated bisphenol A dimethacrylate with a high degree of ethoxylation, low skin irritation, rapid curing, and low shrinkage. It exhibits excellent mechanical strength, heat resistance, and chemical stability. When appropriately incorporated into formulations, it can mitigate shrinkage, enhance chemical resistance, and improve toughness.

11

2026

/

07

A UV monomer used in fields such as PCB ink, UV curing agents, offset printing ink, and 3C coatings.

A UV monomer used in fields such as PCB ink, UV curing agents, offset printing ink, and 3C coatings.

BM6263 (DPHA-90) is a dipentaerythritol hexaacrylate synthesized from grade 90 dipentaerythritol. It features high esterification degree, low impurity content, rapid curing speed, high cross-linking density, high hardness, and excellent wear resistance.

24

2025

/

09

A highly efficient, environmentally friendly, and multi-purpose UV monomer.

A highly efficient, environmentally friendly, and multi-purpose UV monomer.

BM6261 (DPHA-80) is a cost-effective dipentaerythritol hexaacrylate with medium viscosity, fast curing speed, high photosensitivity, and excellent properties such as high hardness and superior abrasion resistance.

24

2025

/

09

UV monomer with 14% bio-based carbon content

UV monomer with 14% bio-based carbon content

BM3384 (3PO-GPTA) is a propoxylated glycerol triacrylate that features low odor, low irritation, and low volatility. It exhibits a fast reaction rate, high crosslink density, excellent scratch resistance, and superior chemical resistance and durability.

24

2025

/

09

UV monomer with a TMPTA content of less than 1000 ppm

UV monomer with a TMPTA content of less than 1000 ppm

BM3380F (4EO-TMPTA) is ethoxylated trimethylolpropane triacrylate. It features rapid curing speed, high crosslink density, high hardness, excellent chemical resistance, and good adhesion. The TMPTA content in BM3380F (4EO-TMPTA), as determined by GC-FID analysis, is less than 1000 ppm, meeting the export requirements of the European Union.

24

2025

/

09

< 1234 >