Introduction to Light-Curing Vacuum Electroplating Coatings


Vacuum coating technology first emerged in the 1930s and began to see industrial applications in the 1940s and 1950s. Large-scale industrial production started in the 1980s, and the technology has since found widespread use in industries such as electronics, aerospace, packaging, decoration, and hot-stamping printing. Vacuum coating refers to a process in which a metal or metal compound is deposited onto the surface of a material—typically a non-metallic one—in the form of a vapor under vacuum conditions. This process falls under the category of physical vapor deposition (PVD). Since the resulting coating is often a metallic thin film, the technique is also known as vacuum metallization or vacuum metalizing. In a broader sense, vacuum coating also encompasses the vacuum evaporation of non-metallic functional films, such as polymers, onto the surfaces of both metallic and non-metallic materials. Among all materials subjected to vacuum coating, plastics are by far the most common, followed by paper coatings. Compared with materials like metals, ceramics, and wood, plastics offer advantages such as abundant availability, easily adjustable properties, and convenient processing. As a result, a wide variety of plastics and other polymeric materials have become widely used as engineering decorative structural materials in numerous industrial sectors, including automotive, home appliances, daily packaging, and arts and crafts. However, most plastic materials suffer from drawbacks such as low surface hardness, lack of aesthetic brilliance, and poor wear resistance. By depositing an ultra-thin metallic film onto the surface of plastic, it is possible to impart a brilliant metallic appearance to the plastic. Moreover, selecting the appropriate metal source can significantly enhance the wear resistance of the material's surface, greatly expanding the decorative potential and application scope of plastics. The functions of vacuum coating are multifaceted, which in turn determines its extremely diverse range of applications. Generally speaking, the primary functions of vacuum coating include endowing coated surfaces with a highly metallic luster and mirror-like finish, giving thin-film materials outstanding barrier properties, and providing excellent electromagnetic shielding and electrical conductivity.

After vacuum coating, plastic parts exhibit the color of the metal used as the coating material, displaying exceptional metallic reflectivity and achieving a high-quality surface decorative effect. Metal sources such as aluminum, chromium, brass, and stainless steel each have distinct hues. If metallic aluminum is used as the vapor-deposition source, its surface can be colored using dyes or pigments, resulting in a wide variety of colorful coatings with strong decorative appeal. In fact, today, vacuum coating processes aimed primarily at decorative purposes generally use aluminum as the metal source, while some applications employ brass as the metal source. These processes find applications in areas such as furniture fittings, lighting components, reflector housings for automotive spotlights, automotive decorative parts, cosmetic boxes, toys, and other everyday consumer goods that emphasize decorative effects. Leveraging the highly reflective properties of metal coatings, these processes can also be used to manufacture optical components and other optical and optoelectronic devices based on the principle of light reflection—for example, in the production of optical discs. The manufacturing process involves injecting a photosensitive shaping gel between a polycarbonate (or polystyrene) substrate and a master information mold. After curing the gel from the plastic side under illumination, the master mold is removed. A ultra-thin reflective aluminum film is then vacuum-deposited onto the cured shaping gel surface, facilitating the reflection of laser beams and enabling the generation of optical information. Additionally, a layer of coating can be pre-applied onto the substrate surface; by using a hard mold for embossing, a visible interference grating structure can be formed. Subsequently, vacuum coating is applied to further enhance the diffraction effect of the grating, yielding practical interference grating structures.

Plastic films are primarily used as packaging materials for commodities, especially in the packaging of food and pharmaceutical products. Often, the film’s permeability—its ability to allow gases, moisture, and microorganisms to pass through—determines the shelf life and storage duration of these products. If the permeability is too high, oxygen, moisture, and microorganisms can easily penetrate the packaging, causing food or pharmaceutical products to spoil rapidly. For instance, by vacuum-depositing an extremely thin aluminum film onto heat-resistant and mechanically robust packaging plastics such as OPP, BOPP, BOPET, BUPA, and CPP, the resulting metal-aluminum film—with its high density—can provide excellent barrier properties. This processing technique has already become widely adopted in China. Currently, the gold- and silver-colored cardstock extensively used in the printing industry is produced via a vacuum-coating process combined with coloring techniques. First, a vacuum-deposited aluminum-coated PET film is obtained; then, this film is coated with adhesive and laminated onto glass-based cardstock. There are two main types of gold- and silver-colored cardstock produced using the vacuum-coating process: one involves vacuum-coating the aforementioned PET film and subsequently laminating it onto the cardstock; the other involves applying a primer coat to the cardstock, vacuum-coating it, and then adding a protective topcoat. Consequently, one type of cardstock features a surface made of PET plastic film, while the other has a surface coated with an organic layer.

Plastics and most nonmetallic materials are nonconductive. Particularly with plastics, prolonged exposure to electric fields can easily lead to the accumulation of static electricity. Vacuum deposition of a thin metallic film can effectively eliminate this static charge buildup (electrostatic discharge, ESD), making it especially important in the electronics and optoelectronics industries. Vacuum coating can also serve as a conductive metal layer. As is well known, plastics are insulators; however, an increasing number of modern electronic and optical devices incorporate plastic components. For instance, the conductive transparent films or substrates commonly used in LCDs can often be made from PET material. By vacuum-depositing a thin film of metal or metal oxide onto such PET substrates, we can achieve excellent conductivity without compromising the substrate’s transparency. Vacuum-coated housings for electronic devices can effectively shield against electromagnetic interference (EMI) and radio frequency interference (RFI). Polyesters and BOPP plastic films that have undergone vacuum coating—thanks to their surface polarizability and conductivity—are widely used in the manufacture of electronic components such as capacitors. Compared to traditionally used aluminum-foil capacitors, these vacuum-coated films offer significantly improved stability, enhanced processability, reduced component size, and lower material consumption.

Share to:

Related News


Factors to Consider When Selecting Oligomers (UV Resins) for Light-Curing Coatings

The selection of oligomers (UV resins) in UV-curable coatings is a critically important step in the coating manufacturing process. When choosing oligomers, several factors must be taken into account to ensure that the coating’s performance and cost are optimized. In practical applications, the selection should be made based on actual needs to achieve the best coating results.


How to Improve the Weather Resistance of UV Topcoats

For outdoor UV topcoats, weather resistance is crucial; therefore, how to enhance the weather resistance of coatings is a very obvious question. So, how can we improve the weather resistance of UV topcoats?


Low Surface Energy Monomer Photocuring Applications

With the development of modern industry, light-curing technology is being increasingly widely applied across various fields—especially in printing, coatings, and plastics, where its role has become indispensable. Among these applications, low-surface-energy monomer-based light-curing technology stands out as a particularly important technique with extremely promising prospects.