Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Performance Characteristics of Light-Curing Vacuum Coating Coatings
Release time:
2014-06-10 11:18
Unlike solvent-based vacuum coating coatings, UV-curable vacuum coating coatings are, in principle, 100% solid content. All components are theoretically fully crosslinked into the cured network structure, enabling zero VOC emissions. As a primer for vacuum coating, once cured, these coatings do not release volatile substances under vacuum conditions, which helps ensure excellent adhesion of the coating to the primer and maintains its highly glossy appearance. Moreover, since there is no solvent evaporation to disturb the surface, the cured film exhibits excellent smoothness and can easily achieve a high-gloss finish—features that perfectly match the performance requirements of vacuum coating. At the same time, UV-curable coatings also offer advantages such as low pollution, low energy consumption, and rapid curing. Whether it’s solvent-based coatings or UV-curable coatings, the performance characteristics required for both the primer and topcoat in vacuum coating remain the same.
The rapid curing advantage of UV-curable coatings is not only reflected in production efficiency. These coatings can be applied and cured directly on the production line, enabling either continuous or semi-continuous (for individual solid parts) manufacturing processes. Coating curing is completed in an instant, significantly reducing the time required for film formation. This also lowers the likelihood of wet films being contaminated by dust, ensuring superior surface smoothness compared to solvent-based coatings. Since there is virtually no solvent evaporation to disturb the coating surface, UV-cured coatings avoid defects such as orange peel and pinholes that are common in solvent-based coatings, resulting in a mirror-like finish on the cured surface. In the coating process, using UV-curable coatings as primers can provide a sealing effect that surpasses that of solvent-based primers. During the drying and film-forming process of solvent-based coatings, large amounts of solvent migrate out of the film; their vigorous movement may compromise the density of the cured film. The small amount of residual solvent left behind in the final cured film essentially creates tiny, latent pores within the film. Under vacuum conditions, solvent molecules trapped in these pores will escape from the coating. Moreover, volatile substances from the shallow layers of the plastic substrate may also escape through these pores, which on one hand disrupts the smoothness of the coating surface, exacerbating defects like pinholes and other imperfections, and leading to more visible flaws in the coated surface; on the other hand, it hinders the proper adhesion between the vacuum-deposited layer and the paint film. UV-curable primers, however, do not suffer from these issues.
The difficulty in obtaining thicker coatings via vacuum deposition without a primer primarily stems from the significant difference in thermal expansion coefficients between the coating and the plastic substrate. Typically, the linear thermal expansion coefficient of metals does not exceed a certain threshold. In contrast, plastic materials have a linear, non-crosslinked molecular structure, with molecular chains possessing considerable freedom of movement. Consequently, the linear thermal expansion of unfilled, reinforced plastic substrates generally exceeds that of metals. At elevated surface temperatures, the plastic substrate is in a relatively expanded state. After the coating process is complete and the temperature begins to drop, the plastic substrate undergoes rapid contraction, while the metal coating shrinks only slightly. This disparity inevitably leads to the accumulation of substantial internal stresses within the coating. In severe cases, the coating may crack or peel off entirely. The flaky appearance commonly observed in vacuum-deposited coatings is often caused by such stress accumulation. For polymer materials that are appropriately filled or fiber-reinforced, their linear thermal expansion coefficients can be reduced to levels comparable to those of metals. Currently, SMC and BMC materials—widely used in vacuum deposition—are glass-fiber-reinforced unsaturated polyester thermosetting plastics, falling precisely into this category. Although solvent-based coatings can significantly reduce the thermal expansion coefficient of the paint film through thermal crosslinking curing, residual solvents still exert a considerable influence on the film's expansibility. In contrast, UV-curable primers do not suffer from solvent residue issues; their crosslinking is more complete, allowing for better control over thermal expansion. By adjusting the formulation and carefully controlling the irradiation curing process, it is possible to tailor the thermal expansion properties of the cured coating to match those of vacuum-deposited layers, thereby making it feasible to achieve thicker vacuum coatings.
Vacuum-coated plastic substrates can utilize formulations reinforced with fillers and fibers. This approach can also be applied to coating primers—by adding appropriate inorganic fillers, the cured film can be strengthened and its thermal expansion properties reduced. In solvent-based coatings, as a large amount of solvent evaporates during film formation—from a wet coating to a dry one—the film’s volume (more accurately, its thickness) significantly decreases. If an inorganic filler is added to such a system, the resulting coating will tend to have a matte or frosted appearance. When vacuum-coating on top of this type of primer, the final coating surface will exhibit a low metallic luster—a result that does not align with the original intention of vacuum metal plating. Of course, as people’s aesthetic preferences continue to evolve, this metallic-matte effect may still find a certain market niche. In contrast to solvent-based coatings, UV-curable coatings do not involve solvent evaporation during the curing and film-forming process; thus, their volume change is much smaller. Even if ordinary inorganic fillers are incorporated into the formulation, they are unlikely to induce a matte or frosted appearance. In other words, inorganic fillers can effectively reinforce UV-curable primers without compromising their high surface gloss.
From the perspective of adhesion, polyurethane acrylate is commonly chosen as the main resin for light-cured vacuum coating primers. In addition to exhibiting excellent adhesion to most plastic substrates, polyurethane acrylate also boasts outstanding overall mechanical properties. After curing, the primer’s surface exhibits a moderate degree of flexibility, which facilitates the initial embedding of high-energy coating particles into the shallow layers of the coating—thus enhancing the overall adhesion of the coating. Of course, if the primer is excessively soft or fails to dry properly on the surface, it implies that the polymer chains in the primer have greater freedom of movement, potentially leading to a higher thermal expansion coefficient. This, in turn, can cause a mismatch in shrinkage between the primer and the coating, generating internal stresses that compromise the adhesion and quality of the coating. Moreover, if the primer surface remains uncured, a large number of coating particles will become trapped within the layer, not only increasing the consumption of coating materials but, more critically, degrading the smoothness, gloss, and uniformity of the coating. Generally speaking, in multi-layer coating systems, maintaining an appropriate level of flexibility in the primer can help buffer the stress-induced shrinkage from the topcoat, thereby contributing positively to the overall adhesion of the multi-layer system.
Share to:
Related News
Introduction to Light-Curing Vacuum Electroplating Coatings
Light-cured vacuum plating is a surface treatment technology that can enhance the hardness, scratch resistance, and wear resistance of material surfaces. Moreover, light-cured vacuum-plating coatings can be applied to a variety of materials, including metals, plastics, glass, and ceramics.
Factors to Consider When Selecting Oligomers (UV Resins) for Light-Curing Coatings
The selection of oligomers (UV resins) in UV-curable coatings is a critically important step in the coating manufacturing process. When choosing oligomers, several factors must be taken into account to ensure that the coating’s performance and cost are optimized. In practical applications, the selection should be made based on actual needs to achieve the best coating results.
How to Improve the Weather Resistance of UV Topcoats
For outdoor UV topcoats, weather resistance is crucial; therefore, how to enhance the weather resistance of coatings is a very obvious question. So, how can we improve the weather resistance of UV topcoats?