Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Factors to Consider When Selecting Oligomers (UV Resins) for Light-Curing Coatings
Release time:
2014-06-07 09:46
The selection of oligomers (UV resins) in UV-curable coatings should comprehensively take into account the following factors.
I. Viscosity
Using low-viscosity resins can reduce the amount of reactive diluents required; however, low-viscosity resins often have a low molecular weight, which can adversely affect the physical properties of the resulting film.
II. Light-Curing Speed
Selecting a resin with a fast photocuring speed is an important condition. Not only can it reduce the amount of photoinitiator required, but it can also meet the demand for rapid curing in automated photocuring coating production lines. Generally speaking, the higher the functionality, the faster the photocuring speed; epoxy acrylates cure rapidly, and amine-modified oligomers also exhibit fast photocuring speeds.
III. Physical Properties
The physical and mechanical properties of the coating film formed by UV-curable coatings are primarily determined by the performance of the oligomer-based cured film. The physical and mechanical properties of different types of UV-curable coatings generally fall into the following categories.
1. Hardness
Epoxy acrylates and unsaturated polyesters generally exhibit high hardness; the presence of benzene ring structures in oligomers also helps to enhance hardness. High functionality, high cross-linking density, and a high glass transition temperature (Tg) all contribute to higher hardness.
2. Flexibility
Polyurethane-acrylate resins, polyester-acrylate resins, polyether-acrylate resins, and pure acrylates generally exhibit good flexibility. Oligomers containing aliphatic long-chain structures also demonstrate excellent flexibility. The higher the molecular weight, the better the flexibility. A lower crosslinking density correlates with improved flexibility, and a lower glass transition temperature (Tg) is associated with better flexibility.
3. Wear resistance
Polyurethane-acrylic resins exhibit good abrasion resistance; oligomers that readily form hydrogen bonds among themselves also demonstrate excellent abrasion resistance; and resins with high cross-linking density offer superior abrasion resistance.
4. Tensile strength
Epoxy acrylates and unsaturated polyesters exhibit high tensile strength. Generally, oligomers with higher molecular weights, greater polarity, lower flexibility, and higher crosslinking degrees possess higher tensile strength.
5. Impact resistance
Polyurethane-acrylate resins, polyester-acrylate resins, polyether-acrylate resins, and pure acrylic esters exhibit good impact resistance. Oligomers with low Tg and good flexibility generally have excellent impact resistance.
6. Adhesion
Oligomers with low shrinkage exhibit good adhesion to substrates. Oligomers containing functional groups such as -OH and -COOH demonstrate excellent adhesion to metals. Oligomers with low surface tension promote good wetting and spreading on substrates, thereby enhancing adhesion.
7. Chemical resistance
Epoxylacrylates, polyurethane acrylate resins, and polyester acrylate resins all exhibit good chemical resistance; however, polyester acrylate resins have poorer alkali resistance. Increasing the crosslink density enhances chemical resistance.
8. Yellowing resistance
Aliphatic polyurethane-acrylate resins, polyether-acrylate resins, and pure acrylates exhibit excellent resistance to yellowing.
9. Luster
Epoxy acrylates and unsaturated polyesters exhibit high gloss; as the crosslinking density increases, the gloss also increases. Oligomers with high Tg and high refractive index have excellent gloss.
10. Wettability of pigments
Oligomers modified by general fatty acids and amines exhibit better pigment wetting properties; oligomers containing -OH and -COOH groups also demonstrate superior pigment wetting performance.
4. Glass transition temperature Tg of the oligomer
Oligomers with a high Tg generally exhibit high hardness and good gloss; oligomers with a low Tg offer good flexibility and excellent impact resistance.
V. Curing Shrinkage Rate of Oligomers
A low curing shrinkage rate helps enhance the adhesion of the cured film to the substrate. As the functionality of the oligomer increases, the crosslinking density rises, and consequently, the curing shrinkage rate also increases.
VI. Toxicity and Irritancy
Due to their relatively high molecular weights, oligomers are mostly viscous resins that are non-volatile and not flammable or explosive. They also exhibit low toxicity and minimal skin irritation.
Share to:
Related News
How to Improve the Weather Resistance of UV Topcoats
For outdoor UV topcoats, weather resistance is crucial; therefore, how to enhance the weather resistance of coatings is a very obvious question. So, how can we improve the weather resistance of UV topcoats?
Low Surface Energy Monomer Photocuring Applications
With the development of modern industry, light-curing technology is being increasingly widely applied across various fields—especially in printing, coatings, and plastics, where its role has become indispensable. Among these applications, low-surface-energy monomer-based light-curing technology stands out as a particularly important technique with extremely promising prospects.
Applications of Visible-Light Initiators
Visible-light initiators are a class of compounds capable of absorbing visible light and releasing free radicals or ions. They are widely used in fields such as UV-curable coatings, inks, and adhesives. In the application of visible-light initiators, they can accelerate the progression of photocuring reactions, thereby enhancing both the production efficiency and quality of the final products.