Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Low Surface Energy Monomer Photocuring Applications
Release time:
2014-06-05 08:55
The lower the surface free energy of a light-curing material, the weaker its adhesion to environmental substances, and the better its resistance to dirt. However, lotus leaves and plastics operate via two different mechanisms.
1. The mechanism behind the lotus leaf is as follows: It features high-density nanoscale pores with an ultra-large surface area, resulting in exceptionally high surface energy. This allows it to adsorb a layer of air bubbles—air, however, has very low surface energy—thus creating a dual-superhydrophobic surface. This effect relies on biological energy to be sustained; once life ceases, the nanoscale pores will gradually degrade and lose their functionality. Similarly, high temperatures can also damage the surface structure.
2. Mechanism of low-surface-energy materials such as plastics: The intrinsic properties of these materials determine their low surface energy. Their hydrophobic or oleophobic nature is both persistent and balanced, requiring no external energy input to maintain.
Surface tension/surface energy data for selected liquids or solids: (25°C)
• Theoretical purified water (DI Water): 72 mN/m
• Hydrocarbon surfactant: approximately 35 mN/m
• Silicone surfactant: approximately 25 mN/m
• Fluorinated surfactant: approximately < 20 dynes/cm (0.01–0.1%)
• Epoxy resin = 47 dynes/cm
• Polyamide polymer (nylon) = 46 dynes/cm
• Cellulose = 45 dynes/cm
• Polyester polymer (PET Polymer) ≈ 43 dynes/cm
• Polyvinyl Chloride Polymer ≈ 39 dynes/cm
• Polyacrylic polymer ≈ 35 dynes/cm
• Polyethylene polymer ≈ 33 dynes/cm
• Polyurethane polymer ≈ 30 dynes/cm
• Silicon polymer ≈ 24 dynes/cm
•Teflon = 18 dynes/cm
Types and Applications of Organic Fluorinated Photocurable Monomers
• Perfluorooctyl ethyl (methyl) acrylate monomer
• Perfluorobutyl ethyl (methyl) acrylate monomer
• These are two commonly used fluorinated (methyl)acrylic monomers; they are monofunctional. No products yet exist for bifunctional or polyfunctional monomers.
• Vinyl ether cationic photopolymerizable monomers and epoxy cationic photopolymerizable monomers are still under development.
•However, since fluorine-containing photocurable materials have lower surface energy and better weather resistance and chemical resistance, these will be key areas for future development.
Share to:
Related News
Applications of Visible-Light Initiators
Visible-light initiators are a class of compounds capable of absorbing visible light and releasing free radicals or ions. They are widely used in fields such as UV-curable coatings, inks, and adhesives. In the application of visible-light initiators, they can accelerate the progression of photocuring reactions, thereby enhancing both the production efficiency and quality of the final products.
How to efficiently select oligomers (resins) in UV coating formulations
In UV coating formulations, the selection of oligomers (resins) is critically important, as they significantly influence both the performance and cost of the coating. To efficiently choose oligomers, it’s essential to consider multiple factors, such as molecular weight, chemical structure, viscosity, and surface tension. Below are some recommendations to help you select oligomers more effectively.
Common Coating Terms and Definitions
During the use of coatings, we often encounter various terms that typically pertain to the types, properties, and applications of coatings. This article will introduce you to some common coating terms and their explanations.