News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Typical Defects of UV 3C Coatings (Part 4)

Typical Defects of UV 3C Coatings (Part 4)

During the application of UV 3C coatings, uneven gloss is one of the common defects that compromise the consistency of a product’s appearance. It manifests as inconsistent gloss levels across different areas of the same part—some regions appear shiny, while others appear dull—thereby undermining the overall visual uniformity. In high‑quality 3C products such as smartphone housings and laptop panels, uneven gloss can degrade the aesthetic quality and negatively impact consumer perception. Understanding the characteristics and root causes of uneven gloss helps identify this defect during the manufacturing process.

26

2026

/

06

Typical Defects of UV 3C Coatings (Part 3)

Typical Defects of UV 3C Coatings (Part 3)

During the application of UV 3C coatings, bubbles and pinholes are common defects that compromise both the coating’s density and its surface smoothness. Bubbles appear as circular blisters of varying sizes on the coating film, while pinholes are tiny depressions left behind after the bubbles rupture. Although their appearances differ, both are closely linked to entrapped gases within the coating. In the context of 3C electronic products, where surface quality is paramount, the presence of bubbles and pinholes not only detracts from aesthetics but also undermines the coating’s protective performance.

25

2026

/

06

Typical Defects of UV 3C Coatings (Part II)

Typical Defects of UV 3C Coatings (Part II)

During the application of UV 3C coatings, particulates and impurities are among the most common defects that compromise surface quality. These manifest as tiny, raised particles on the coating film, which feel rough to the touch and appear as distinct speckled defects under illumination. Such defects are particularly noticeable in 3C products—such as smartphone housings and laptop panels—that demand high levels of surface smoothness and gloss, significantly impacting the product’s aesthetic appeal and consumers’ perception.

25

2026

/

06

Typical Defects of UV 3C Coatings (Part 1)

Typical Defects of UV 3C Coatings (Part 1)

During the application of UV 3C coatings, orange‑peel texture is one of the most common surface defects. It manifests as irregular, raised and recessed wrinkles on the coating film, significantly compromising the smoothness and gloss of the finish. This defect is particularly prevalent in high‑quality 3C products—such as smartphone housings and laptop panels—where surface aesthetics are critical. The formation of orange peel is influenced by multiple factors, including the coating formulation, spray‑application process, and curing conditions; understanding its characteristics and underlying causes is essential for improving the visual quality of the coating.

25

2026

/

06

Application Scope of UV 3C Coatings

Application Scope of UV 3C Coatings

UV 3C coatings are UV‑curable formulations specifically designed for computers, communications equipment, and consumer electronics. By curing rapidly, they form protective and decorative surface layers on electronic device housings, making them the mainstream surface‑treatment solution in the 3C industry. As consumer electronics continue to innovate and market demands evolve, the application scope of UV 3C coatings has expanded from its initial focus on computer peripherals to encompass a range of niche markets, including smartphones, wearable devices, and smart home products. Gaining insight into these application areas helps to better understand the industry value and future development trends of UV 3C coatings.

24

2026

/

06

How to Choose UV 3C Coatings (Part 2)

How to Choose UV 3C Coatings (Part 2)

Selecting UV‑curable 3C coatings requires consideration not only of product positioning and substrate type, but also of specific performance criteria and application conditions. Hardness, abrasion resistance, adhesion, and chemical resistance are fundamental requirements for surface coatings on 3C electronic products, while environmental regulations and available application equipment further narrow the selection scope. This article outlines a systematic approach to choosing UV‑curable 3C coatings, focusing on three key aspects: performance specifications, environmental and application constraints, and validation of the selected formulation.

24

2026

/

06

How to Choose UV 3C Coatings (Part 1)

How to Choose UV 3C Coatings (Part 1)

UV 3C coatings come in a wide variety, with significant differences across formulations, performance characteristics, and application scenarios. Improper selection can result in substandard coating performance, reduced production efficiency, or uncontrolled costs. Making the right choice requires a comprehensive assessment from multiple perspectives, including the intended application, substrate type, performance requirements, and environmental considerations. This article will outline specific strategies for selecting UV 3C coatings, focusing on two key factors: application context and product positioning, as well as substrate type.

24

2026

/

06

Disadvantages of UV 3C Coatings

Disadvantages of UV 3C Coatings

Although UV 3C coatings offer significant advantages in terms of curing speed, coating performance, and environmental compatibility, they also have certain limitations and drawbacks that should not be overlooked. Challenges can arise at every stage—ranging from equipment investment and process control to coating properties and substrate compatibility. These shortcomings vary across different types of UV coatings, such as oil-based and water-based formulations; understanding them is crucial for making more informed decisions during technology selection.

23

2026

/

06

< 1...161718...144 >