Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Crosslinking Modification of Waterborne Polyurethane
Release time:
2016-03-11 14:47
Crosslinking Modification of Waterborne Polyurethane
Preface
The molecular chains of waterborne polyurethane resins typically have a linear structure or a small number of branched structures, and films without crosslinking exhibit relatively low strength. To enhance the water resistance, chemical resistance, high-temperature resistance, and mechanical properties of their cured films, it is necessary—during resin synthesis—to appropriately increase the degree of crosslinking, introduce certain crosslinkable functional groups, or add crosslinking agents, thereby ensuring sufficient crosslinking during film curing and forming either an interpenetrating network structure or a polymerized crosslinked system that meets various application requirements.
I. Internal Crosslinking Method
The internal crosslinking method involves directly synthesizing waterborne polyurethanes with a moderate degree of crosslinking. Typically, the following three methods are employed:
1. When synthesizing prepolymers, an appropriate amount of polyols and polyisocyanates with multiple functional groups (typically trifunctional) is introduced. Commonly used substances include TMP, HDI trimer, and IPDI trimer.
2. Aliphatic waterborne polyurethanes can be chain-extended with an appropriate amount of polyamines, giving rise to macromolecules with a lightly crosslinked structure. Commonly used polyamines include diethylenetriamine and triethylenetetramine.
3. Employ both Method 1 and Method 2 simultaneously. For internal crosslinking modification of waterborne polyurethane, it is crucial to precisely control the degree of internal crosslinking. If the degree of internal crosslinking is too low, the modification effect will be insignificant; if it’s too high, it will adversely affect the film-forming performance.
II. Self-Crosslinking Method (Single-Component)
The so-called self-crosslinking method refers to a process in which, after a waterborne polyurethane film has formed, it can automatically undergo a chemical reaction to achieve crosslinking, thereby increasing the crosslinking degree of the coating and improving its performance. Consequently, it is essential to modify the macromolecular structure of waterborne polyurethanes.
Both internal crosslinking and self-crosslinking methods can be used to produce single-component waterborne polyurethane coatings. The molecular backbone of these coatings can be either linear or branched, and they can also be thermoplastic or exhibit spontaneous, photo-induced, or thermally induced crosslinking. These coatings are characterized by ease of application and the absence of any risk of gelation during storage. However, their film properties—such as hardness, abrasion resistance, and chemical resistance—are inferior to those of two-component waterborne polyurethanes.
Currently, single-component waterborne polyurethane coating resins are modified waterborne polyurethanes. There are many methods for modification, such as modification using drying oils, incorporation of blocked isocyanate groups, amino resins, epoxy resins, and acrylic grafting (UV-PUD), among others.
1. This is achieved by introducing methods such as dry-oil fatty acids (with double-bond structures) and multi-alkoxy-silicon units, enabling the material to undergo auto-oxidative crosslinking and hydrolytic condensation reactions after film formation, thereby enhancing its overall performance.
2. Waterborne polyurethane coatings containing blocked isocyanates are thermally induced crosslinking type waterborne polyurethanes. These coatings utilize waterborne polyurethanes containing blocked isocyanate groups, along with low-molecular-weight polyols or polyamines as crosslinking agents. Under the influence of heat, the blocking groups are released, regenerating the NCO groups and thereby enabling crosslinking. Commonly used blocking agents include caprolactam, phenol, ethyl acetoacetate, methyl ethyl ketoxime, and sodium bisulfite. Among these, the unblocking temperature for sodium bisulfite is approximately 70°C, while for the others it is around 150°C.
3. In addition, under heating conditions, HMMM (hexamethoxymethylmelamine) and waterborne epoxy can chemically react with the active hydrogen atoms on the hydroxyl, amino, carbamate, or urea groups of waterborne polyurethane dispersions. This allows for the formulation of bake-cured, single-component waterborne polyurethane coatings.
Thermoplastic waterborne polyurethanes have poor water resistance, solvent resistance, and chemical resistance. While bake-curable single-component systems exhibit excellent overall performance, they demand stringent application conditions, making them unsuitable for large-scale components. Moreover, certain substrates (such as wood and plastics) cannot withstand high temperatures. Therefore, room-temperature-curing two-component waterborne polyurethane coatings occupy an important position within the field of waterborne polyurethane coatings.
4. Acrylic grafting leads to ultraviolet-curable systems (UV-PUD). In recent years, acrylic ester grafting systems have attracted widespread attention and intense development within the industry due to their excellent performance and ease of use.
3. External Crosslinking Agent Method (Two-Component)
The anionic waterborne polyurethane prepared by the self-emulsification method still contains a large number of carboxyl groups after film formation, which deteriorates the water resistance of the coating. Similar to solvent-borne two-component PU systems, waterborne polyurethanes can be supplemented with external crosslinkers before application. After film formation, these crosslinkers react with the carboxyl groups in the coating and the reactive functional groups on the external crosslinkers, thereby eliminating the hydrophilic groups in the coating and significantly enhancing its water resistance. At the same time, this process also leads to a certain improvement in the mechanical properties of the coating.
Common crosslinking agents include epoxy siloxanes, polyaziridines, carbodiimides, as well as water-dispersible polyisocyanates, epoxy resins, and amino resins.

1. Crosslinking of silane coupling agents
Some silane coupling agents can serve as crosslinking agents for waterborne polyurethanes. The major overseas manufacturers of silicone products are Crompton and Shin-Etsu of Japan, while there are also several small-scale manufacturers in China.
The crosslinking agents for silicone-based waterborne polyurethanes are primarily those containing epoxy groups and siloxane groups. The epoxy groups can react with carboxyl groups, introducing the siloxane groups into the macromolecular chains. Subsequently, crosslinking is achieved through hydrolysis of the siloxane groups and condensation of the resulting silanol groups.
This class of crosslinking agents features the following characteristics: improved resistance to solvents, impact resistance, and scratch resistance; excellent adhesion in both wet and dry conditions; a coating that is hard yet remains flexible; no adverse effects on the transparency or color of the cured film; and high gloss retention even after aging. The following products fall into this category:

Among them, 187 has higher activity and is typically used for formulating two-component systems; it should be mixed before use. 1770 has lower activity and can be used to formulate single-component systems; its dosage can be calculated based on the acid value of the resin. Generally, the molar ratio is:


The chemical mechanism of crosslinking involves the two functional groups of epoxy silanes: The epoxy group of the molecule reacts with the carboxyl groups of the resin, while the alkoxy moiety, after hydrolysis, undergoes polycondensation to form siloxane bonds. The hydroxyl groups generated from the hydrolysis of the alkoxy groups can also react with the substrate surface, thereby enhancing the wet adhesion of the coating or improving the compatibility between the pigment and the resin. This mechanism can be represented as follows:

2. Crosslinking of polyaziridine
Aziridine compounds have been used in fields such as coatings, textiles, and healthcare for many years. Only in recent years have they begun to be employed as room-temperature crosslinkers for waterborne polyurethanes. These compounds can react with carboxyl and hydroxyl groups, and under acidic conditions they can even self-polymerize; however, they remain highly stable in alkaline environments. Typically, they are formulated into a two-component system and mixed just before use. The crosslinked films exhibit significantly improved resistance to water, chemicals, high temperatures, and adhesion to substrates. When subjected to baking, their performance is further enhanced. Coatings containing this type of crosslinker should be used up within 3 to 5 days at room temperature to prevent hydrolysis and loss of activity. The crosslinking mechanism between multi-aziridine crosslinkers and waterborne polyurethanes is as follows:

The functionality of DSM’s crosslinker CX-100 is 3, and its equivalent weight is 166. When formulating paints, the molar ratio of aziridine groups to carboxyl groups should be between 1:1 and 0.6:1. The typical addition amount is 1% to 3% of the emulsion volume; the addition method involves diluting it 1:1 with water before adding it to the formulation. Due to its excellent water solubility, it can be easily used by simply stirring manually. However, this type of crosslinker exhibits certain toxicity and is relatively expensive, which has hindered its wider adoption.

3. Crosslinking with polydicyanamide
Polycarbodiimides are synthesized via the polycondensation of bifunctional isocyanates in the presence of a catalyst. Their molecular weight (Mr) can be adjusted by using small amounts of alcohols or amines, and water-dispersible polycarbodiimide formulations can be obtained by introducing hydrophilic groups. This type of crosslinking system was developed in the 1980s by Union Carbide Corporation in the United States, with the aim of creating a crosslinking system that combines the curing performance of aziridine/carboxyl crosslinking systems while reducing toxicity. A key feature of this crosslinking system is its ability to rapidly crosslink with carboxyl-containing resins—complete curing can be achieved in as little as 30 minutes at 85°C. The reaction proceeds as follows:


4. Crosslinking of waterborne polyisocyanates
Isocyanate compounds contain highly reactive isocyanate groups (-NCO), which can react with compounds containing active hydrogen, such as amines, hydroxyl groups, carboxyl groups, urea groups, and carbamate groups, thereby yielding crosslinked polymers. In waterborne polyurethanes, the common approach is to introduce hydroxyl groups to form a crosslinked system with the -NCO groups.
Among these, the selection of isocyanate monomers is a key factor determining the performance of the coating film. For example, curing agents synthesized from 1,6-hexanediisocyanate (HDI) and isophorone diisocyanate (IPDI) exhibit excellent film appearance and demonstrate a well-balanced combination of drying speed and pot life.
HDI features a long methylene chain, resulting in a lower viscosity of its curing agent, which is easily dispersed by polyols. The resulting coating film exhibits excellent leveling properties, a fine appearance, and superior flexibility and scratch resistance.
IPDI features an aliphatic cyclic structure; its coating films dry quickly, exhibit high hardness, and possess good chemical resistance and abrasion resistance. However, IPDI curing agents have relatively high viscosity and are not easily dispersed by polyols, resulting in lower leveling and gloss performance compared to HDI curing agents.
One component of this system is a hydrophilically modified polyisocyanate. Typically, aliphatic diisocyanate trimers are selected and grafted with nonionic surfactants (such as polyethylene oxide). The functional degree ranges from 3 to 4, and the solids content can reach up to 100%. These systems can also be appropriately diluted using solvents such as esters, ketones, aromatics, and ether esters. During application, this component can be readily dispersed into the other component—the hydroxyl-containing component—simply by manual stirring.
To enhance the dispersibility of polyisocyanate curing agents in water, hydrophilic groups—whether ionic, nonionic, or a combination of both—are often employed. These hydrophilic components exhibit excellent compatibility with polyisocyanates and, acting as internal emulsifiers, facilitate the dispersion of the curing agent in the aqueous phase while reducing the energy consumption associated with mixing and shearing. However, a drawback is that the hydrophilic modification consumes some of the NCO groups in the curing agent, thereby lowering its functionality.
The next-generation modified hydrophilic curing agents must reduce the content of hydrophilic modifiers, increase the NCO functionality of the curing agent, and enhance its dispersibility in water. For example, the adduct of p-tolylene diisocyanate with trimethylolpropane features NCO groups attached to tertiary carbon atoms, which exhibit lower reactivity and react very slowly with water. Consequently, two-component coatings formulated with this curing agent show minimal side reactions between NCO groups and water, enabling the production of bubble-free coatings. However, this curing agent has a high glass transition temperature, so it needs to be combined with polyols that have lower glass transition temperatures and stronger emulsifying capabilities to formulate two-component coatings.
In addition to waterborne polyurethane, the hydroxyl-containing component of this two-component waterborne polyurethane coating can also be waterborne short-oil-length alkyd resin, waterborne polyester, or waterborne acrylic resin—these are commonly supplied to the market in the form of aqueous dispersions. The number-average molecular weight is on the order of 10³, and the hydroxyl value is approximately 100 mg KOH/g (resin). The molar ratio of the two reactive functional groups is —NCO/—OH = 1.2–1.6:1, and the pot life is about 4 hours.
5. Ketone carbonyl/acylhydrazide crosslinking system
This self-crosslinking system can be applied for room-temperature curing and is commonly used in waterborne acrylates and WPU (primarily PUA).
The reaction between the keto carbonyl group and the hydrazide group is considered an acid-catalyzed reaction that does not occur under neutral or alkaline conditions. During the drying process, as the volatile alkaline neutralizing agent continuously evaporates, the system gradually becomes more acidic. Under acid catalysis, the keto carbonyl and hydrazide groups undergo an irreversible dehydration reaction, forming a cross-linked structure. The reaction proceeds as follows:

Application exception:
The self-crosslinking system of bis-acetone acrylamide (DAAM) and adipic dihydrazide (ADH) first involves incorporating DAAM into the molecular chain of an aqueous polymer, and then forming crosslinks through the addition of an external crosslinking agent, ADH.
In polyacrylate (PA) and polyurethane-acrylate emulsions (PUA), waterborne polymer systems can be introduced via free-radical polymerization. In contrast, in conventional PUDs, a novel chain-extending agent called DDP must first be synthesized via the Michael addition reaction using diethanolamine (DEA) and DAAM as raw materials, before being incorporated into WPU.
4. Light-Cured Waterborne Polyurethane (UV-PUD)
Light-cured waterborne polyurethane refers to a coating system that achieves crosslinking through the action of ultraviolet light. It features a fast curing rate and high production efficiency, making it particularly well-suited for assembly-line operations.
As a new type of environmentally friendly coating, UV-curable waterborne polyurethane coatings combine many advantages of both traditional UV curing technology and waterborne coating technology. Moreover, they fundamentally resolve the longstanding conflict between hardness and flexibility inherent in conventional UV-curable coatings. In recent years, these coatings have become a hot research and development area, with the waterborne polyurethane acrylate UV-curable series showing the fastest progress.
Currently, only a few foreign companies have products that have achieved a certain scale of application in fields such as wood coatings and paper inks—companies like Bayer, Cytec, and BASF. Although there are many domestic research enterprises—such as Taiwan Changxing, Shanghai Changlian, Jiangsu Sanmu, Zhongshan Shuiyuan, and Wanhua Chemical—few of them have been widely adopted.
Share to:
Related News
Overview and Applications of UV Metal Coatings
Metals are widely found in nature and are extremely common in everyday life; they are a class of materials that play a crucial and extensively utilized role in modern industry. Metals possess properties such as luster, ductility, and excellent conductivity of both electricity and heat.
A Brief Discussion on the Influence of Temperature on UV Resin Synthesis and Its Control
Temperature is a physical quantity that indicates the degree of hotness or coldness of an object. On a microscopic level, it reflects the intensity of thermal motion of the object's molecules. The faster the molecules in an object move, the higher its temperature.
Silicone Performance and Applications
Organosilicon compounds, or organosilicon substances, are compounds that contain Si-O bonds and have at least one organic group directly bonded to a silicon atom. By convention, compounds in which organic groups are linked to silicon atoms via oxygen, sulfur, nitrogen, or other elements are also often classified as organosilicon compounds. Among these, polysiloxanes—polymeric compounds whose backbone consists of siloxane linkages (-Si-O-Si-)—represent the largest and most extensively studied and widely used class of organosilicon compounds, accounting for more than 90% of the total usage.