Principle and Application of Polymerization Inhibitors


I. Definition of a Polymerization Inhibitor

A substance that can completely terminate the free-radical polymerization reaction of olefin monomers.

Ways in which free radicals are generated:

1. Homolytic cleavage

2. Illumination

3. Redox Reactions

4. High-energy particle radiation

II. The Role of Polymerization Inhibitors

In unsaturated compound systems, polymerization inhibitors can preferentially react with free radicals in the system, forming non-radical species or generating free radicals with low reactivity that are insufficient to initiate further polymerization. This effectively halts the chain-growth polymerization process involving free radicals, bringing significant benefits to the stability, storage, and transportation of resins.

The content of the polymerization inhibitor in the UV resin: 99.9% UV resin, 0.1% polymerization inhibitor.

Polymerization Inhibition Mechanism

Substances that inhibit polymerization reactions by terminating each free radical and thereby bringing the polymerization reaction to a halt until the radicals are completely depleted are called polymerization inhibitors or retarders. In contrast, substances that merely weaken the activity of free radicals and slow down the rate of polymerization without completely stopping the reaction are referred to as retarders.

III. Classification Based on the Mechanism of Polymerization Inhibitors

Phenolic polymerization inhibitors; quinone polymerization inhibitors; aromatic nitro compounds polymerization inhibitors; inorganic compound polymerization inhibitors; the polymerization-inhibiting effect of oxygen

 

1. Phenolic polymerization inhibitors

Hydroquinone

More commonly used, low in price, and performs well at room temperature;

However, it can sometimes cause the system's color to darken, so it is often not used.

p-Hydroxyanisole

It imparts excellent storage stability to the resin. This product exhibits the best solubility in organic solvents and has the lightest color.

2,6-Di-tert-butyl-p-cresol

Widely used polymerization inhibitors with strong inhibition capability, good heat resistance and stability, and low cost.

Highly toxic.

2,5-Di-tert-butylhydroquinone

It can react slowly with free radicals over a long period, thereby eliminating free radicals generated during resin storage.

While enhancing the storage stability of the resin, it has minimal impact on gelation time.

2-tert-Butylhydroquinone

It serves as an effective storage stabilizer for unsaturated polyester resins and also as a stabilizer for highly reactive resins.

It boasts the most comprehensive functionality and can deliver excellent performance over a wide temperature range. Moreover, when the temperature rises, it only slightly prolongs the resin’s curing time. This product is often used in combination with other polymerization inhibitors.

Features

Widely applicable and relatively effective.

It must be dissolved in the system and exhibit an inhibition effect only in the presence of oxygen.

The polymerization inhibition mechanism is as follows:

2. Quinone-type polymerization inhibitors

Benzoquinone

It can still function effectively under hypoxic conditions and is suitable for etherification processes protected by nitrogen or other inert gases.

The color is yellow and affects the resin's color.

Methylhydroquinone (THQ)

It delivers excellent performance and is widely used in the production of highly active unsaturated polyester resins, commonly found in gel coat resins and SMC resins. This product exhibits excellent solubility and effective polymerization inhibition at high temperatures.

Other quinone-based polymerization inhibitors

      

Tetrachlorobenzoquinone Anthraquinone 1,4-Naphthoquinone

Features

It can inhibit polymerization under anaerobic conditions.

The polymerization inhibition effects vary among different monomers.

Example 1: Benzoquinone is an effective polymerization inhibitor for styrene and vinyl acetate, but it only exerts a retardant effect on methyl acrylate and methyl methacrylate.

Example 2: Tetrachlorobenzoquinone is an effective polymerization inhibitor for vinyl acetate, but it has no inhibitory effect on acrylonitrile.

Polymerization Inhibition Mechanism

The polymerization-inhibition mechanism of quinones is not yet fully understood. It may involve the addition or disproportionation reaction of quinones with free radicals, generating quinone-type or semiquinone-type free radicals that then combine with active free radicals to yield non-reactive products, thereby exerting a polymerization-inhibiting effect.

3. Polymerization Inhibitor for Aromatic Nitro Compounds

Commonly used include:

                    

N-Nitrosodiphenylamine Nitrosobenzene Nitrobenzene

          

2,4-Dinitrotoluene Meta-dinitrobenzene

Features

The polymerization-inhibiting effect of aromatic nitro compounds is weaker than that of phenols.

It is only effective against vinyl acetate, isoprene, butadiene, and styrene; it has no inhibitory effect on acrylates and methacrylates.

Polymerization Inhibition Mechanism

Nitrobenzene exerts a polymerization-inhibiting effect by generating stable nitrogen-oxygen radicals through reaction with free radicals.

4. Inorganic Compound Polymerization Inhibitor

Commonly used ones include ferric chloride, cuprous chloride, copper sulfate, titanium trichloride, sodium sulfate, and ammonium thiocyanate.

Features: High polymerization inhibition efficiency and can also be used as an aqueous-phase polymerization inhibitor.

Polymerization inhibition mechanism: Inhibition occurs via charge transfer.

5. The inhibitory effect of oxygen on polymerization

Molecular oxygen has two unpaired electrons, which can exert both a polymerization-inhibiting and a polymerization-initiating dual effect:

(1) At low temperatures, it inhibits the polymerization reaction; (2) at high temperatures, it initiates the polymerization reaction.

Polymerization Inhibition Mechanism

R• + O2 → ROO•

The peroxide radicals formed by the reaction of oxygen with macromolecular chain radicals are relatively inactive and cannot initiate copolymerization reactions even at room temperature or slightly higher temperatures. This oxygen-induced inhibition effect causes the surface of unsaturated polyester resins that is exposed to air to cure incompletely and become sticky.

However, at high temperatures, peroxide radicals formed by the reaction of oxygen with free radicals can decompose into active free radicals, thereby initiating a polymerization reaction.

6. Summary

(1) Phenolic polymerization inhibitors: These must be oxidized into the corresponding quinones under oxygen-containing conditions and then combine with chain radicals to exert their polymerization-inhibiting effect.

(2) Quinone-type polymerization inhibitors: Quinones undergo addition or disproportionation reactions with free radicals, then combine with active free radicals to form non-reactive products, thereby exerting a polymerization-inhibiting effect.

(3) Aromatic nitro compound polymerization inhibitors: They exert their inhibitory effect by generating stable nitrogen-oxygen radicals that react with free radicals.

(4) Inorganic compound polymerization inhibition: Polymerization inhibition occurs via charge transfer;

(5) Oxygen’s inhibition effect: It reacts with free radicals from the crosslinking agent and macromolecular chain radicals to form relatively less active peroxide radicals, thereby exerting an inhibition effect.

IV. Other Classifications of Polymerization Inhibitors

1. Classified by temperature

(1) Inhibitors with fixed activity: Within the normal storage and curing temperature range, these inhibitors rapidly react with free radicals, consuming themselves in the process and thereby establishing an induction period. Once consumed, the resulting inhibitors lose their activity—for example, hydroquinone.

(2) Thermally sensitive polymerization inhibitors: These inhibitors act as polymerization inhibitors at normal storage temperatures but decompose upon heating, becoming ineffective—examples include tert-butylcatechol, among others.

(3) Dual-action polymerization inhibitors: These inhibitors exert a polymerization-inhibiting effect at lower temperatures but switch to a polymerization-promoting effect upon heating, such as oxygen, organic copper salts, quaternary ammonium salts, and sulfur.

2. Classified by Principle

(1) In the absence of oxygen: In the presence of benzoquinone without oxygen, it directly reacts with free radicals to form a semiquinone intermediate, which then reacts with another free radical to yield a stable compound.

(2) In the presence of oxygen: In the presence of oxygen, hydroquinone and its derivatives react with free radicals to form peroxyl radicals. These peroxyl radicals then react with hydroquinone to form a radical adduct. This adduct subsequently reacts with another peroxyl radical to yield a stable compound.

3. Classification by Composition

(1) Single-effect type: Only one polymerization inhibitor is needed to achieve a polymerization-inhibiting effect. Examples include hydroquinone and p-benzoquinone.

(2) Composite-type inhibitors—i.e., the combined use of two or more types of polymerization inhibitors—are employed in the process to ensure storage stability of resins and prepregs at room temperature. This approach allows for adjustable pot life while not affecting the final curing speed of the finished products.

V. Method for Selecting Polymerization Inhibitors

When selecting a polymerization inhibitor, the primary requirement is high inhibition efficiency. Additionally, its solubility in the system and its compatibility with the resin should also be taken into account.

Some monomers used in non-photocurable systems are also required to have polymerization inhibitors that can be easily removed by distillation or chemical methods, or that can both inhibit polymerization at room temperature and rapidly decompose at reaction temperatures.

1. It has good miscibility with monomers and resins; only when fully miscible can it effectively inhibit polymerization.

2. It can effectively inhibit the occurrence of polymerization reactions, ensuring that monomers, resins, emulsions, or adhesives have a sufficient shelf life.

3. The polymerization inhibitor in the monomer should be easy to remove or should not affect the polymerization activity. It is best to choose an inhibitor that remains effective at room temperature but loses its inhibitory effect at a moderately higher temperature—this way, there is no need to remove the inhibitor before use. For example, tert-butylcatechol and p-tert-butylphenol monobutyl ether are inhibitors of this type.

4. Does not affect the appearance of the final product. For example, polymerization inhibitors can discolor due to high-temperature oxidation during adhesive preparation, thereby affecting the product’s appearance.

5. Using several polymerization inhibitors in combination can significantly enhance their inhibitory effect.

Example 1: Add three polymerization inhibitors—hydroquinone, tert-butylcatechol, and copper cycloalkanoate—to the unsaturated polyester resin:

Hydroquinone exhibits the strongest activity; when mixed with styrene and polyester, it can withstand temperatures of around 130°C without undergoing copolymerization within 1 minute, allowing for safe dilution and mixing. tert-Butylcatechol has poor polymerization-inhibiting effects at high temperatures, but at slightly lower temperatures—such as 60°C—it demonstrates a polymerization-inhibiting effect that is 25 times stronger than that of hydroquinone, enabling a longer shelf life. Cuprous cyclohexanecarboxylate acts as a polymerization inhibitor at room temperature, yet at higher temperatures, it exhibits an accelerating effect instead.

Example 2: In the presence of oxygen, a mixture of tert-butylcatechol and phenothiazine, or a mixture of hydroquinone and diphenylamine, exhibits an anti-polymerization effect that is approximately 300 times greater than that achieved when either compound is used alone.

6. The amount of polymerization inhibitor should be适量—too much is harmful rather than beneficial. For example, when the iodine concentration is 10⁻⁴ mol/L, it serves as an effective polymerization inhibitor; however, exceeding this concentration can trigger a polymerization reaction. Iodine is generally not used alone and must be combined with a small amount of potassium iodide to enhance its solubility and improve its inhibition efficiency.

7. Non-toxic, harmless, and does not cause environmental pollution.

8. Stable performance, affordable and readily available.

6. Reflection

What are the effects of the contents of initiators, reducing agents, and polymerization inhibitors on resin curing and performance?

Example: Experimental materials

Experimental resin EAM (Bis-GMA modified with maleic anhydride), containing 30% MMA
Initiator BPO (Benzoyl Peroxide)
Amine DEPT (Diethylenetriamine)
Polymerization inhibitor 2,6-Di-tert-butyl-p-cresol

Experimental method: The content of the initiator, amine, and polymerization inhibitor was varied separately to test and compare the resin’s double-bond conversion, mechanical properties, and curing rate.

The following table shows the different contents of initiators, amines, and polymerization inhibitors added to the resin:

Experimental results:

Conclusion:

Within a certain range, the conversion degree and mechanical properties of the resin are positively correlated with the contents of BPO and DEPT, and negatively correlated with the content of the polymerization inhibitor.

Increasing the content of BPO and DEPT can enhance the curing rate of the resin, while increasing the content of the polymerization inhibitor will slow down the curing rate of the resin.

 

Share to:

Related News


Crosslinking Modification of Waterborne Polyurethane

The molecular chains of waterborne polyurethane resins typically have a linear structure or a small number of branched structures, and films without crosslinking exhibit relatively low strength. To enhance the water resistance, chemical resistance, high-temperature resistance, and mechanical properties of their cured films, it is necessary—during resin synthesis—to appropriately increase the degree of crosslinking, introduce certain crosslinkable functional groups, or add crosslinking agents, thereby ensuring sufficient crosslinking during film formation and creating either an interpenetrating network structure or a polymerized crosslinked system that meets various application requirements.


Overview and Applications of UV Metal Coatings

Metals are widely found in nature and are extremely common in everyday life; they are a class of materials that play a crucial and extensively utilized role in modern industry. Metals possess properties such as luster, ductility, and excellent conductivity of both electricity and heat.


A Brief Discussion on the Influence of Temperature on UV Resin Synthesis and Its Control

Temperature is a physical quantity that indicates the degree of hotness or coldness of an object. On a microscopic level, it reflects the intensity of thermal motion of the object's molecules. The faster the molecules in an object move, the higher its temperature.