Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Detailed Explanation of the Composition of Three-Proof Coating Raw Materials (Part 1)
Release time:
2025-04-29 07:11
As a critical protective material in the electronics manufacturing field, the performance of conformal coatings hinges on the precise formulation of their resin matrix, solvent system, and functional additives. Through intermolecular chain interactions and chemical reactions, these raw materials form a transparent film on the surface of electronic components that offers both physical barrier protection and chemical stability. Below, we systematically analyze the constituent elements of conventional conformal coatings, starting from the chemical properties of the raw materials and their underlying protection mechanisms.
As the film-forming base of conformal coatings, the molecular structure of the resin directly determines the coating's weather resistance, flexibility, and chemical stability. Different resins exhibit differentiated advantages in terms of protective performance, depending on the polarity of their functional groups, crosslinking density, and crystalline morphology.
I. Acrylic Resin
Acrylic resins have a linear backbone formed by the copolymerization of vinyl and carboxyl groups. The polarity of the ester groups in the molecular chains imparts excellent flexibility and adhesion to these resins. Their curing process primarily involves solvent evaporation, enabling rapid film formation at room temperature, making them well-suited for automated coating lines with high demands on production efficiency.
1. Protective Properties: The polar functional groups of the ester moiety can form hydrogen bonds with the substrate surface, enhancing the adhesion of the coating. The orderly arrangement of linear chain segments gives the coating high transparency, making it suitable for protecting optical components.
2. Process Advantages: Its low-viscosity properties enable a variety of application methods, including spray coating and dip coating, making it particularly suitable for covering circuit boards with complex structures. The surface-drying time can be controlled within 10 minutes, significantly shortening the production cycle.
3. Limitations: The ester group is susceptible to erosion by strong acids and strong bases, and may swell under extreme chemical conditions; the molecular chains lack sufficient rigidity, resulting in relatively poor scratch resistance.
II. Fluorocarbon Resin
Fluorocarbon resins have a main chain composed of carbon-fluorine bonds. Due to the large radius and high electronegativity of fluorine atoms, a dense electron cloud barrier is formed. These molecular structural characteristics endow fluorocarbon resins with exceptional chemical inertness and surface hydrophobicity.
1. Protective Properties: Fluorocarbon resins can withstand the corrosion of most organic solvents and strong oxidizing agents; they have low surface energy, making it difficult for stains to adhere, and are ideal for protecting outdoor electronic devices.
2. Process Challenges: High crystallinity leads to poor solubility, requiring the use of special solvents and high-temperature conditions to achieve uniform coating. During curing, pinhole defects are prone to occur, necessitating strict control of process parameters.
3. Application scenarios: Suitable for applications such as chemical instrumentation and marine detection equipment that are exposed long-term to corrosive environments, significantly extending the service life of the equipment.
III. Polyurethane Resin
Polyurethane resin is formed through the polymerization reaction between isocyanates and polyols, with both urethane hard segments and polyether/polyester soft segments present in the molecular chain. This biphasic structure imparts to it excellent mechanical properties and low-temperature stability.
1. Protective Properties: The hard segments form physical crosslinks, giving the coating high tensile strength; the soft segments provide space for deformation, enabling resistance to mechanical impacts. Polyether-based polyurethanes exhibit excellent hydrolysis resistance, making them suitable for applications in humid environments.
2. Process Characteristics: Coating hardness can be controlled by adjusting the ratio of isocyanate to polyol, thereby meeting the protection requirements of different substrates. Moisture-curing polyurethanes can cure at room temperature, reducing energy consumption.
3. Limitations: Limited high-temperature resistance; not suitable for long-term use at high temperatures. Polyester-based polyurethanes are susceptible to hydrolysis and should be used in conjunction with moisture-proof measures.
IV. Silicone Resin
Silicone resins have a main chain composed of silicon-oxygen bonds, and the organic groups attached to silicon atoms impart unique surface properties. Their core advantages lie in their wide temperature-range stability and excellent electrical insulation performance.
1. Protective Properties: The silicon-oxygen bond has a higher bond energy than the carbon-carbon bond, enabling it to withstand prolonged use at high temperatures without degradation. Its dielectric constant and tangent of the loss angle remain stable over a wide temperature range, making it well-suited for the protection of high-voltage electronic components.
2. Process Characteristics: The curing process can be controlled by adjusting humidity and temperature. Room-temperature curing takes more than 24 hours, while accelerated curing at elevated temperatures can reduce the time to as little as 2 hours. The coated surface exhibits a lotus-effect, giving it self-cleaning properties.
3. Application Scenarios: Widely used in fields such as aerospace and automotive electronics, this product can meet the demands of extreme temperature variations and high reliability.
V. Summary
As the main component of conformal coatings, different resin matrices, with their unique chemical properties and protection mechanisms, each excel in specific areas of electronic manufacturing protection. However, no single resin is perfect; its limitations constantly remind us that in practical applications, we must comprehensively consider multiple factors. Optimizing the formulation and synergy between resins and other raw materials is key to fully harnessing the performance of conformal coatings.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
The Origin and Development of Traditional Three-Proof Coatings
Traditional conformal coatings originated in the U.S. military sector and were initially used to protect circuit boards and components of electronic devices from harsh environmental conditions. With technological advancements, their variety has continued to expand—from acrylic-based formulations to silicone and polyurethane types—and their performance and application areas have gradually broadened as well.
Operating Procedures for Applying Three-Proof Coating (Part 3)
The spray-coating method, with its advantages of high coating efficiency and strong adaptability, occupies an important position in large-scale production as well as in the protection of circuit boards with complex structures. However, although the spray-coating method may seem easy to operate, it actually places extremely high demands on various parameters and operational details. From securing the circuit board, to fine-tuning parameters during the trial-spray phase, and then to precisely controlling factors such as spraying sequence, pressure, speed, distance, and angle during formal spraying—any deviation at any stage can lead to defects in the paint film, seriously compromising the protective performance of the circuit board.
Operating Procedures for Applying Three-Proof Coating (Part 2)
The dip-coating method involves completely immersing workpieces such as circuit boards into a conformal coating liquid. Relying on the surface tension and adhesion properties of the coating liquid, this process forms a uniform protective film on the surface of the workpiece. It is particularly suitable for mass production of small-sized electronic components or circuit boards with simple structures and high requirements for coating uniformity. Thanks to its advantages—such as high production efficiency and excellent coating uniformity—the dip-coating method has become an important choice in large-scale circuit-board protection manufacturing. However, the dip-coating process involves numerous complex factors. From the precise placement and removal of PCBs to the meticulous control of parameters like dipping speed, dipping time, and lifting speed, every step directly affects the final quality of the coating film and its protective performance. Even a slight oversight can lead to defects such as uneven coating thickness, air bubbles, or dripping, seriously compromising the circuit board’s protective capabilities.