Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Detailed Explanation of the Composition of Three-Proof Coating Raw Materials (Part 2)
Release time:
2025-04-29 17:20
As a critical protective material, conformal coating plays an irreplaceable role. It provides triple protection—moisture resistance, mold prevention, and salt-spray resistance—for electronic components and various precision devices, effectively extending product lifespans and ensuring stable operation even in complex and harsh environments. The outstanding performance of conformal coatings largely hinges on the careful formulation and scientific composition of their raw materials. From solvents that dissolve resins and regulate viscosity to various functional additives that precisely enhance specific coating properties, each ingredient functions like a critical component in a sophisticated instrument, working in synergy to create a high-performance conformal-coating system.
I. Solvent
Solvents directly affect the film-forming quality and application efficiency of coatings by dissolving resins and adjusting the viscosity of the system. Based on their evaporation rates and solubility, solvents can be classified into the following types:
1. Volatile solvent
Low-boiling-point solvents—such as toluene and xylene—achieve surface drying through rapid evaporation and are well-suited for dip-coating processes. However, it is essential to control ambient humidity to prevent moisture from penetrating the coating and causing whitening. The molecular kinetic properties of these solvents determine their evaporation rates, so they must be used in conjunction with humidity control measures to avoid moisture ingress and subsequent coating whitening.
High-boiling-point solvents—such as butyl acetate and butyl carbitol—extend the application window and help prevent sagging. However, they may also increase curing time, so it’s important to strike a balance between production efficiency and coating quality. The length of their molecular chains and the number of polar functional groups influence the resin’s dissolution efficiency; therefore, the formulation ratio must be optimized according to the specific type of resin.
2. Reactive diluent
Monofunctional diluents—such as isobornyl acrylate—contain only one polymerizable group per molecule. By participating in the free-radical polymerization of the resin, they reduce the viscosity of the system while increasing the crosslinking density. However, it’s important to carefully control the addition amount to avoid compromising the flexibility of the coating.
Multifunctional diluents—such as trimethylolpropane triacrylate—accelerate curing by increasing the number of reaction sites. With three reactive sites per molecule, they not only speed up curing but also facilitate the formation of a three-dimensional network structure. However, they tend to induce localized stress concentrations. To prevent cracking in the coating, it is essential to use them in combination with silicone-based leveling agents that help relieve stress.
II. Functional Additives
Additives, when added in trace amounts, can significantly enhance specific properties of coatings; their mechanisms of action involve intermolecular interactions and surface physicochemical regulation.
1. Flow control agent
Silicone-based leveling agents: By migrating to the coating surface, they reduce the surface tension gradient, inhibit the formation of Bénard vortices, and thereby enhance the smoothness of the coating surface. Their molecular weight and modified functional groups determine their compatibility; excessive addition can lead to reduced recoatability.
Fluorocarbon leveling agents: Achieve ultra-hydrophobicity by forming oriented fluorocarbon chains on the coating surface, offering both leveling and dual anti-fouling properties. They are suitable for semiconductor packaging applications with stringent cleanliness requirements.
2. Matting agent
Silica fume: The matting effect is achieved by controlling particle size. If the particle size is too large, the haze level will exceed the standard; if it’s too small, the matting efficiency will be insufficient. Its surface needs to be treated with a silane coupling agent to enhance dispersibility, but this may reduce the coating’s abrasion resistance. Therefore, it’s necessary to strike a balance between optical and mechanical properties.
Wax-based additives: These achieve matte finish and haze reduction through a micro-convex structure formed after melting. They are suitable for matte finishing applications. The dosage must be carefully controlled; excessive amounts can lead to reduced adhesion. They should be used in conjunction with phosphate ester-based adhesion promoters.
3. Adhesion Promoter
Silane coupling agents: The silanol groups generated through hydrolysis form covalent bonds with the hydroxyl groups on the substrate surface, thereby enhancing adhesion. However, hydrolysis conditions must be carefully controlled to prevent gelation.
Phosphate ester additives: They undergo chelation reactions with the oxide layer on metal substrates, forming chemical bonds at the interface. However, they may affect the chemical resistance of the coating, so it’s necessary to select them based on the type of substrate.
4. Anti-aging agent
Hindered amine light stabilizers: By scavenging free radicals and decomposing peroxides, they extend the half-life of photoaging; however, they may affect coating transparency, so the addition amount must be carefully controlled.
UV absorbers convert ultraviolet light in the 300–400 nm wavelength range into thermal energy and release it; however, they may reduce the weathering resistance of the coating and thus need to be used in conjunction with other additives.
III. Summary
In summary, the composition of conformal coating materials resembles a complex and sophisticated system, in which solvents and functional additives each play an indispensable role. A deep understanding of the composition of conformal coating materials provides us with ample room for optimization in both production and application. By precisely controlling the types and proportions of raw materials, we can deliver more reliable and efficient protective solutions for the fields of electronic manufacturing and industrial protection.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
Detailed Explanation of the Composition of Three-Proof Coating Raw Materials (Part 1)
As a critical protective material in the electronics manufacturing field, the performance of conformal coatings hinges on the precise formulation of their resin matrix, solvent system, and functional additives. Through intermolecular interactions and chemical reactions among these raw materials, a transparent film with both physical barrier properties and chemical stability is formed on the surface of electronic components. Below, we systematically analyze the constituent elements of conventional conformal coatings, starting from the chemical characteristics of the raw materials and their protective mechanisms.
The Origin and Development of Traditional Three-Proof Coatings
Traditional conformal coatings originated in the U.S. military sector and were initially used to protect circuit boards and components of electronic devices from harsh environmental conditions. With technological advancements, their variety has continued to expand—from acrylic-based formulations to silicone and polyurethane types—and their performance and application areas have gradually broadened as well.
Operating Procedures for Applying Three-Proof Coating (Part 3)
The spray-coating method, with its advantages of high coating efficiency and strong adaptability, occupies an important position in large-scale production as well as in the protection of circuit boards with complex structures. However, although the spray-coating method may seem easy to operate, it actually places extremely high demands on various parameters and operational details. From securing the circuit board, to fine-tuning parameters during the trial-spray phase, and then to precisely controlling factors such as spraying sequence, pressure, speed, distance, and angle during formal spraying—any deviation at any stage can lead to defects in the paint film, seriously compromising the protective performance of the circuit board.