The Origin and Development of Traditional Three-Proof Coatings


Traditional conformal coatings originated in the U.S. military sector and were initially used to protect circuit boards and components of electronic devices from harsh environmental conditions. With technological advancements, their variety has continued to expand—from acrylic-based formulations to silicone and polyurethane types—and their performance and application areas have gradually broadened as well.

I. Origin

The development of conformal coatings originated from the severe challenges posed by extreme environments to electronic devices, and they are primarily used in electronic equipment within the military sector. Given the harsh conditions faced by electronic equipment in military applications, in the mid-20th century, as military systems such as radar, missiles, and shipborne electronic systems rapidly advanced, the reliability issues of conventional circuit boards under adverse conditions—including high temperatures, high humidity, salt spray, and mold—became increasingly apparent. To protect electronic devices from environmental impacts, researchers began developing conformal coatings. The primary purpose of these coatings is to safeguard the circuit boards and components of electronic devices, enabling them to function reliably even in harsh environments characterized by high temperatures, humidity, and salt spray.

II. Development

1. Solvent-based acrylic system

The first-generation acrylic conformal coatings, based on methyl methacrylate as the matrix, currently dominate the market. Acrylic conformal coatings boast advantages such as fast curing speed, high transparency, lower cost, and ease of application. However, they exhibit relatively weaker resistance to temperature changes and chemicals, making them commonly used for the protection of general electronic devices. At this stage, the technological bottleneck lies in the conflict between solvent selection and film-forming performance: fast-drying solvents tend to result in poor leveling, while slow-drying solvents, on the other hand, can hinder production efficiency. Moreover, with the increasingly prominent issue of environmental pollution caused by solvent evaporation, technicians have been compelled to explore new approaches.

2. Silicone-modified system

As a second-generation technology, silicone-based conformal coatings achieve a dual enhancement in both temperature resistance and flexibility by incorporating polydimethylsiloxane segments. After applying silicone conformal coatings, printed circuit boards subjected to salt-spray tests can even exhibit a service life several times longer than that achieved with conventional protective solutions. The advantages of silicone conformal coatings include excellent weather resistance, superior water resistance, and outstanding performance across a wide range of temperatures—both high and low. However, this technology faces challenges such as poor adhesion and inadequate surface hardness. When PCB surfaces are improperly treated or when residual flux remains on the board, the coating is prone to peeling.

3. Polyurethane-acrylic hybrid system

The polyurethane series of three-proof coatings—representing the third-generation technology—achieve a balance of performance through molecular design. By combining hydroxyl-acrylic resins with isocyanate prepolymers, these coatings retain the strong adhesion characteristic of polyurethanes while also benefiting from the rapid curing properties of acrylics. The polyurethane three-proof coatings exhibit outstanding abrasion resistance, chemical corrosion resistance, and flexibility, making them ideal for applications in environments with high humidity or chemical exposure. A key innovation in this stage lies in the development of selective coating technology: by integrating laser-based positioning with precision spray valves, the three-proof coating can be applied exclusively to critical areas, thereby avoiding any adverse effects on heat-dissipating components.

4. Light-curing system

The fourth-generation UV-curable coating—UV triple-protection varnish—is based on acrylate oligomers and achieves second-level curing through the addition of a photoinitiator. The UV curing process significantly boosts production efficiency and dramatically reduces energy consumption. However, this technology places stringent demands on equipment, requiring high-precision UV light sources and nitrogen protection systems, resulting in relatively high initial investment costs.

III. Summary

With the continuous advancement of technology and growing awareness of conformal coatings, the application fields of conformal coatings are becoming increasingly broad. From their initial use solely in printed circuit boards for military applications, they have gradually been adopted for mainboards in a wide variety of electronic products. Today, conformal coatings play a crucial role in civilian and commercial applications, the automotive industry, aerospace, marine navigation, medical devices, outdoor electronics, and other sectors, continuously driving the deeper development of the conformal coating industry.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


Operating Procedures for Applying Three-Proof Coating (Part 3)

The spray-coating method, with its advantages of high coating efficiency and strong adaptability, occupies an important position in large-scale production as well as in the protection of circuit boards with complex structures. However, although the spray-coating method may seem easy to operate, it actually places extremely high demands on various parameters and operational details. From securing the circuit board, to fine-tuning parameters during the trial-spray phase, and then to precisely controlling factors such as spraying sequence, pressure, speed, distance, and angle during formal spraying—any deviation at any stage can lead to defects in the paint film, seriously compromising the protective performance of the circuit board.


Operating Procedures for Applying Three-Proof Coating (Part 2)

The dip-coating method involves completely immersing workpieces such as circuit boards into a conformal coating liquid. Relying on the surface tension and adhesion properties of the coating liquid, this process forms a uniform protective film on the surface of the workpiece. It is particularly suitable for mass production of small-sized electronic components or circuit boards with simple structures and high requirements for coating uniformity. Thanks to its advantages—such as high production efficiency and excellent coating uniformity—the dip-coating method has become an important choice in large-scale circuit-board protection manufacturing. However, the dip-coating process involves numerous complex factors. From the precise placement and removal of PCBs to the meticulous control of parameters like dipping speed, dipping time, and lifting speed, every step directly affects the final quality of the coating film and its protective performance. Even a slight oversight can lead to defects such as uneven coating thickness, air bubbles, or dripping, seriously compromising the circuit board’s protective capabilities.


Operating Procedures for Applying Three-Proof Coating (Part 1)

Among the many methods for applying conformal coatings, the brush-coating method is widely used—particularly in small-batch production, localized coating applications, and scenarios that demand high coating precision—thanks to its flexible operation and versatility across various application environments. However, despite its seemingly simple nature, the brush-coating method actually has stringent requirements for operational standards. Every single detail can affect the final coating result and, consequently, the protective performance of the circuit board.