Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Pad Printing
Release time:
2016-06-07 16:27
I. Definition
Pad printing is one of the special printing techniques. It enables the printing of text, graphics, and images onto surfaces of irregular and non-standard-shaped objects, and is now emerging as an important specialized printing method. For example, the text and patterns on mobile phone surfaces are printed using this technique. Similarly, surface printing on computer keyboards, instruments, meters, and many other electronic products is also commonly carried out via pad printing.
Pad printing is a relatively newer printing technique compared to screen printing. As silicone pad printing heads began to emerge, this technology gradually developed as well. Silicone pad printing heads can easily detach from many types of materials—including inks. By using these heads as printing stamps, it’s possible to print simultaneously on uneven surfaces, inclined surfaces, and vertical surfaces.

II. Development History
The pad printing process, a specialized printing technique that was introduced to China in the 1980s, has seen rapid development due to its distinct advantages in printing on small-area and uneven surfaces—advantages that effectively address the limitations of screen printing. In the early 1990s, as China’s market continued to open up, numerous foreign-invested enterprises—primarily from traditional industries such as electronics, plastics, gifts, and toys—began entering the Chinese market one after another. As a result, both pad printing and screen printing technologies experienced extraordinary growth as the primary decoration methods. According to incomplete statistics, the application rates of pad printing and screen printing in these industries reached 27%, 64%, 51%, and 66%, respectively. Pad printing refers to a printing method in which the substrate has an irregular, non-standard surface (such as instruments, electrical components, toys, etc.). It uses copper or steel intaglio plates, from which hemispherical pad printing heads are cast using silicone rubber. These heads are then pressed against the printing plate to transfer ink onto the substrate, thereby completing the transfer printing process.

III. Uses
This modern technology can be applied to materials with uneven surfaces and varying shapes, including:
1. Computer components, microchips, relays, control panels, mobile phones, electronics;
2. Calipers, degree markings on measuring instruments, radio and TV casings;
3. Electronic instruments, household appliances, promotional items, packaging, decorations;
4. CDs, golf balls, eyeglasses, toys, sports equipment, gifts.

IV. Characteristics
It is now difficult to pinpoint exactly when pad printing replaced other printing techniques, but what is certain is that pad printing has indeed complemented and filled gaps left by existing technologies. Simply put, just as with screen printing, pad printing is not constrained by the limitations of a flat squeegee and can therefore print on surfaces that are uneven or textured.

V. Utensils
1. Silicone resin pad for pad printing;
2. Fixture for positioning printed materials;
3. Metal or plastic plates engraved with printing templates;
4. Scraper and oil pan or oil cup.
6. Transfer-printing silicone

Introduction:
Pad printing is a type of printing process using silicone rubber. It primarily involves transferring ink onto the surface of silicone products to print text, graphics, and images. Today, it has become an important specialized printing technique. For example, the text and patterns on silicone buttons on mobile phone surfaces are printed using this method. Similarly, many silicone rubber components in electronic products—such as silicone computer keyboards—are also printed using pad printing. The pad-printing process for silicone is relatively simple: it employs an intaglio plate made of steel (or copper or thermoplastic plastic) and a curved pad-printing head made of silicone rubber. Ink from the intaglio plate is transferred onto the surface of the pad-printing head, which is then pressed against the surface of the object to be printed, thereby reproducing the desired text or image. Silicone buttons that have undergone pad printing exhibit excellent durability, resistance to abrasion, no deformation, no oil bleeding, and efficient ink transfer. Pad-printed silicone is widely used for printing on PVC toys, electronic products, lighting fixtures, plastic toys, electroplated products, trademarks, and irregularly shaped patterns.

Features:
1. Excellent oiling and de-oiling performance;
2. The gel is fine and smooth, with excellent resilience, allowing for numerous transfer-printing cycles without any impurities or particles.
3. The transferred print pattern is clear;
4. Low viscosity and good fluidity;
5. Non-shrinking, easy to oil, and produces clear pad-printed designs.
Primarily used for printing irregular patterns on plastic toys, electroplated products, electronic toys, trademarks, communication devices, craft gifts, stationery, and other similar items.
7. Pad Printing Ink

1. Introduction:
As the name suggests, pad printing ink is specially formulated for use in pad printing. In the pad printing process, ink is often considered the single most critical factor affecting the quality of printing on silicone products. The raw materials of pad printing ink include binders, pigments, solvents, and additives. Such inks are relatively susceptible to factors like temperature, humidity, and static electricity. Therefore, high-quality pad printing ink must feature rapid and stable drying properties, higher color concentration, and consistently stable colloidal characteristics.
2. Product Features:
(1) Low odor, high gloss, high hardness;
(2) Suitable for screen printing and pad printing processes;
(3) Adhesion advantage and acid-alkali resistance;
(4) Product fineness: Below 5 μm;
(5) Bright colors, high gloss, good fluidity, excellent adhesion, and superior abrasion resistance.
3. Types of pad printing inks:
(1) Single-component inks—also known as solvent-evaporative inks—dry through the evaporation of the solvent. These inks do not necessarily require the addition of a catalyst. Single-component inks come in two types: glossy and matte. They are primarily used for printing on plastic substrates.
(2) Two-component inks—also known as chemically reactive inks—must have a catalyst added prior to printing. The catalyst reacts with the resin in the ink, and this polymerization reaction is what enables the ink to dry. When using two-component inks in pad printing, it is essential to add a specific ratio of catalyst, typically measured by weight. The addition ratio of the catalyst must be carefully controlled: adding too much can significantly shorten the ink’s “working life,” while adding too little may result in the ink failing to achieve optimal drying performance during the curing process. Generally speaking, if the mixing ratio between the ink and the catalyst is improper, it can lead to defects in the printed product, such as uneven ink adhesion and insufficient durability of the printed image.
(3) Bake-drying inks: These are divided into two types. One type involves adding an additional catalyst to standard two-component inks; the other type is specially formulated for substrates such as glass, ceramics, and metals. As their name suggests, bake-drying inks must be heated and dried at a specific temperature. When using these inks, it’s essential to calculate the drying time carefully. The higher the drying temperature, the shorter the drying time will be. However, if the drying temperature is too high, the ink film may become brittle. Therefore, it’s crucial to bake the ink at a temperature that maintains its flexibility.
(4) Oxidative inks: These inks undergo a polymerization reaction by absorbing oxygen from the surrounding environment, thereby forming an ink film without the need for added catalysts. Typical applications of oxidative inks include substrates for flexible packaging and synthetic materials such as rubber products or keyboards. Due to their slow and lengthy drying process, oxidative inks are used only in limited quantities.
(5) Sublimation ink: During use, this type of ink requires special processing—after printing, the substrate must be heated to make it porous. When the dye comes into contact with the heated substrate surface, the dye in the ink vaporizes and then penetrates into the substrate’s surface, effectively altering the substrate’s surface color. Once the substrate cools down, the ink adheres firmly to its surface.
The most common applications of sublimation inks are printing on computer keyboards and other printed materials that demand high resistance to oil and abrasion—requirements that cannot be met by two-component inks. Particularly noteworthy is the fact that, since sublimation inks essentially alter the surface color of the substrate, it is relatively difficult to achieve a perfect match between the substrate and ink colors. Therefore, the substrate’s color must be lighter than the final color intended for the print, because on darker substrates, the color changes produced by sublimation inks tend to be less noticeable.
(6) Specialty Inks and Additives: These include edible inks, silicone-resin inks, lubricant inks, corrosion-resistant inks, conductive inks, and UV-curable inks. The ability of these inks to rapidly increase in viscosity will determine whether they can be effectively transferred onto the substrate surface. Meanwhile, to adjust the printability and performance of inks, in addition to adding solvents and catalysts, various additives may also be used, such as viscosity modifiers, antistatic agents, and rheology modifiers. However, the use of additives can significantly affect the printing performance of inks; therefore, caution is essential when employing them.
(7) UV Pad Printing Ink: Unlike other types of ink, UV ink rapidly cures and dries under UV energy. When ultraviolet light penetrates the ink, the photoinitiators within the ink interact with neighboring molecules, and this entire process takes place in just a few seconds or milliseconds. UV ink boasts environmentally friendly characteristics, including resistance to abrasion, acid and alkali, and the absence of volatile substances.
8. Classification of Pad Printers

1. Classification by Transmission Method: Based on the different transmission methods used for the primary motion of pad printers, they can be categorized into three types: manual mechanical pad printers, electric pad printers, and pneumatic pad printers.
Due to their simple structure, ease of operation, and smooth motion, pneumatic pad printers have gained widespread use both domestically and internationally and have become the mainstream type of pad printer.
2. Classified by the number of printing colors: Based on the different numbers of printing colors completed in a single printing process, pad printers can be categorized into single-color pad printers, two-color pad printers, and multi-color pad printers, among others.
Multi-color pad printers can further be classified into shuttle-type and conveyor-belt-type multi-color pad printers, depending on the different transmission methods between colors.
3. According to the ink storage method, pad printers are divided into oil-basin type and oil-cup type;
The oil-basin type pad printer is a relatively common type. The ink-cup type pad printer features a sealed ink reservoir, making it comparatively environmentally friendly and ensuring better ink stability during the printing process.
9. Process Flowchart for Pad Printing

Step 1: First, secure the workpiece onto the fixture. At this point, the steel plate in the ink tray will automatically be filled with ink. Next, a squeegee will scrape off the excess ink, leaving only the ink on the etched surface—the area that will ultimately form the printed design. Many pad printers are equipped with separate ink trays and squeegees; their operating principle is similar to that of the rubber squeegee used in screen printing. The ink used in pad printing is similar to solvent-based inks used in screen printing, except that pad-printing ink has a higher pigment content, which provides better transparency and viscosity, making it easier for the ink to adhere to the substrate. After the excess ink has been scraped off the steel plate, as the solvent gradually evaporates, the ink’s concentration and viscosity increase, allowing the ink to adhere even more readily to the rubber head.

Step 2: As the rubber head on the steel plate is pressed down, ink immediately adheres to it. Because the ink becomes thicker and more viscous, and given the high tension of the silicone rubber head, the ink can easily transfer from the steel plate to the rubber head. In earlier improved pad printing machines, attempts were made to increase the depth of the steel plate in order to hold more ink—thus increasing the amount of ink transferred onto the substrate. However, this concept is actually flawed. Theoretically, the rubber head could pick up 100% of the ink from the ink tray; in practice, though, some portion of the ink has already evaporated in the ink tray, leaving only a small fraction of the ink available for adhesion. In other words, increasing the depth of the ink tray does not significantly boost the amount of ink that ends up being transferred.

Step 3: The ink-covered rubber head will rise vertically away from the ink tray and then move horizontally above the printing material. At this point, the ink is only lightly adhered to the rubber head—just enough to be easily wiped off yet not so much that it drips down. Meanwhile, the solvents on the surface of the ink begin to evaporate once again, while the solvents inside gradually migrate toward the rubber head, causing the ink to start detaching from the rubber head.

Step 4: Press the rubber head onto the printed material to transfer the ink. Although the rubber head can accurately print onto the product, it is designed to roll across the surface of the printed material rather than pressing flatly against it. Moreover, a well-designed rubber head will not leave any gaps when it comes into contact with the object. If gaps were to form, air would get trapped in them, hindering the ink from transferring onto the object.
Once printing is complete, the rubber head rises and then returns to its original shape. As mentioned in Step 3, when the rubber head presses against the printed material, the ink adheres strongly to the surface, ensuring that all the ink is transferred onto the substrate. After cleaning, the rubber head picks up more ink and is ready to begin the next printing cycle. The entire printing process continues to repeat itself in this manner.
10. Pad-printed products








Share to:
Related News
Water transfer printing is a printing technique that uses water pressure to hydrolyze polymers, transferring color-patterned transfer papers or plastic films onto surfaces. As consumer demands for product packaging and decoration continue to rise, the applications of water transfer printing are becoming increasingly widespread. Its indirect printing principle and impeccable printing results effectively address many challenges in surface decoration of various products, and it is primarily used for transferring designs onto ceramics, glass decals, and similar materials.
Those crafts that are both familiar and unfamiliar to us: hot stamping.
Gilding, also known as hot stamping, is a printing and decorative technique. A metal printing plate is heated, and foil is pressed onto the printed material to emboss gold-colored text or patterns. This process relies on the principle of thermal transfer, in which the aluminum layer from electroplated aluminum foil is transferred onto the surface of the substrate to create a distinctive metallic effect. Since the primary material used in gilding is electroplated aluminum foil, gilding is also referred to as electroplated aluminum hot stamping.
A Brief Discussion on Silica Matting Powder
The clear-coat film without matting agents exhibits a mirror-like, highly leveled surface. When light strikes the surface of this mirror-like film, part of the incident light is absorbed and part is reflected; the reflected portion imparts gloss to the film. In contrast, the paint film containing silica-based matting agents features silica particles evenly dispersed throughout the film, creating a slightly roughened surface.