Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Those crafts that are both familiar and unfamiliar to us: hot stamping.
Release time:
2016-05-27 13:55
Gilding process
Gilding, also known as hot stamping, is a printing and decorative technique. A metal printing plate is heated, and foil is pressed onto the printed material to emboss gold-colored text or patterns. This process relies on the principle of thermal transfer, in which the aluminum layer from electroplated aluminum foil is transferred onto the surface of the substrate to create a distinctive metallic effect. Since the primary material used in gilding is electroplated aluminum foil, gilding is also referred to as electroplated aluminum hot stamping.

Overview
For example: gold foil stamping on book covers, gift boxes, trademarks and packaging for cigarettes, alcohol, and clothing; gold foil stamping on greeting cards, invitations, pens, and more. The variety of colors and patterns is extensive, and custom-made special editions can be produced according to specific requirements. The substrates suitable for hot stamping include common paper, papers printed with metallic inks such as gold and silver, plastics (such as PE, PP, PVC, and engineering plastics like ABS), leather, wood, and other specialized materials.
Aluminum foil hot stamping primarily uses heat and pressure to transfer patterns or text onto the surface of the material being stamped. To complete this process, you’ll need a hot stamping machine, a hot-stamping die engraved with specialized text or designs (such as zinc plates, copper plates, silicone plates, etc.), and sufficient heating to reach the required temperature, along with the appropriate pressure and holding time.
Hot stamping machine:

Features
The patterns are clear and aesthetically pleasing, with vivid and striking colors that are both wear-resistant and weather-resistant. On printed cigarette labels, the application of hot stamping accounts for more than 85%. In graphic design, hot stamping can add the finishing touch, highlighting the design’s central theme—especially when used on trademarks and registered names, where its effect is particularly pronounced.
Process cost
1. Mold costs: extremely low; however, auxiliary molds used for hot stamping and embossing on coil materials are relatively expensive.
2. Labor costs: Lower
Product Applications
1. Standard gold and laser-gold hot stamping. Suitable for most products, including gold cards, silver cards, laser cards, and glass cards.
The hot stamping on glass cards is widely used.
2. Positioning holographic hot stamping. Holographic laser-positioned electroplated aluminum foil represents a special process application in design, featuring anti-counterfeiting patterns that significantly enhance product security while also elevating the product’s perceived quality. This type of electroplated aluminum foil is generally produced domestically and, compared to imported counterparts, is relatively more affordable; however, its hot-stamping performance is slightly inferior. The control of hot-stamping temperature, pressure, and speed—and even the specific hot-stamping machine model—plays a crucial role in achieving optimal results with holographic laser-positioned electroplated aluminum foil.
3. Special applications of electroplated aluminum in the manufacturing process. “Hot-stamping first, then printing” is a new creative approach in the cigarette label design and printing industry. This process places extremely high demands on the electroplated aluminum used.
4. Direct hot stamping is performed directly on the surface of UV varnish. This process places extremely high demands on both the UV varnish and the electro-aluminum foil used for hot stamping. During the application of the varnish, it’s crucial to carefully control the amount of coating applied, ensuring as much consistency as possible across the entire batch of products. Moreover, the varnish layer must be thin and evenly distributed. As for the electro-aluminum foil used for hot stamping, it must be able to withstand high temperatures, exhibit excellent adhesion, and demonstrate outstanding compatibility with the UV varnish (the type of resin used in the varnish should match the hot-melt adhesive in the electro-aluminum foil). Among all product types, this process finds relatively limited application. Additionally, when using electro-aluminum foil for hot stamping on gold or silver inks, as well as matte oils, both the hot-stamping surface and the electro-aluminum foil itself have very stringent requirements. If the ink particles on the hot-stamping surface are large or the surface is rough, this can directly interfere with the smooth execution of the hot-stamping process.

Suitable for production
Both small and large batches are acceptable.

Quality and Speed
The hot-stamping details are of extremely high quality; the production cycle is rapid, at approximately 1,000 pieces per hour.
Applicable Materials
1. Most materials can undergo hot stamping, with the most common ones including leather, textiles, wood, paper, cardboard, and plastics.
2. The thickness of the selected material depends on its density and strength. For gold-stamping purposes, the thickness of paper and cardboard should be kept within 2 mm (0.08 in); the thickness of plastics should be kept within 1 mm (0.04 in).

Design Considerations
1. Hot stamping can achieve a variety of surface effects to enhance visual appeal, such as matte, mirror-like, polished, metallized, and holographic finishes. It also supports an extremely wide range of colors, covering all Pantone shades and the RAL color spectrum.
2. The hot-stamping process can be carried out simultaneously, but it is not recommended.
3. Although hot stamping offers high detail quality, different hot-stamping materials produce varying levels of detail quality. For example, gold and silver hot stamping can achieve a minimum thickness of 1.5 mm, whereas other colors cannot attain this level of detail precision.
4. Only flat and roll-shaped materials can be hot-pressed with gold foil; among these, flat materials have the lowest hot-pressing cost. In contrast, roll-shaped materials require auxiliary molds, resulting in significantly higher costs and making them unsuitable for large-scale production.
5. The dimensions of materials used for hot stamping are limited by the machine’s size and generally do not exceed A1 (594*841mm).

Detailed Explanation of the Manufacturing Process

Gilded printed materials





Share to:
Related News
A Brief Discussion on Silica Matting Powder
The clear-coat film without matting agents exhibits a mirror-like, highly leveled surface. When light strikes the surface of this mirror-like film, part of the incident light is absorbed and part is reflected; the reflected portion imparts gloss to the film. In contrast, the paint film containing silica-based matting agents features silica particles evenly dispersed throughout the film, creating a slightly roughened surface.
Surface Treatment Secret: Electrolytic Polishing
Electropolishing involves using the workpiece to be polished as the anode and an insoluble metal as the cathode. Both electrodes are simultaneously immersed in an electrolytic cell, and a direct current is passed through the cell, triggering an electrochemical reaction that selectively dissolves the anode material. As a result, fine burrs on the workpiece surface are removed, and the surface brightness is enhanced.
Principles and Applications of Fourier Transform Infrared Spectroscopy (FT-IR)
When a sample is irradiated with infrared light whose frequency varies continuously, molecules absorb radiation at certain frequencies, causing a net change in their dipole moments due to their vibrational or rotational motions. This results in transitions of molecular vibrational and rotational energy levels from the ground state to excited states, thereby reducing the intensity of transmitted light corresponding to these absorption regions. By plotting the percentage transmittance of infrared light against wavenumber or wavelength, one obtains the infrared spectrum.