News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Analysis of the drawbacks of UV resins with poor adhesion to substrates

Analysis of the drawbacks of UV resins with poor adhesion to substrates

Although UV‑curable resins for difficult-to-bond substrates offer an effective technical solution to the challenge of achieving adhesion on low‑surface‑energy plastics, they also exhibit certain limitations and drawbacks that cannot be overlooked in practical applications. From cost considerations and process control to balancing performance and defining the limits of their applicability, these resins face multifaceted challenges during use. Recognizing these shortcomings enables more informed decision‑making during technology selection, helping to prevent misalignment between expected outcomes and actual results due to incomplete information.

07

2026

/

10

Analysis of the Advantages of UV Resins with Poor Adhesion to Substrates

Analysis of the Advantages of UV Resins with Poor Adhesion to Substrates

In the fields of industrial coating and adhesive bonding, the adhesion of low‑surface‑energy plastics such as polypropylene, polyethylene, and polyester has long posed a significant challenge for manufacturers. Conventional solutions typically rely on auxiliary methods like primer application, corona treatment, or flame treatment—processes that are both labor‑intensive and offer only limited stability in performance. The emergence of UV resins specifically formulated for difficult‑to‑adhere substrates provides a more systematic approach to this problem. Compared with standard UV resins and traditional adhesion‑enhancing techniques, these specialized UV resins deliver notable advantages in adhesion performance, application efficiency, environmental compatibility, and overall cost‑effectiveness.

07

2026

/

10

Key Considerations for Using UV Resins on Difficult-to-Bond Substrates

Key Considerations for Using UV Resins on Difficult-to-Bond Substrates

In practical applications, UV resins for difficult-to-bond substrates require careful attention to key process steps, including substrate treatment, coating operations, curing conditions, and environmental control. Compared with conventional UV resins, these formulations have a narrower adhesion window, making them more susceptible to adhesion loss due to variations in process parameters. Mastering these critical handling considerations helps ensure consistent adhesion performance and reliable coating quality in production.

06

2026

/

10

Operating Procedure for Using UV Resin on Difficult-to-Adhere Substrates

Operating Procedure for Using UV Resin on Difficult-to-Adhere Substrates

The application procedure for UV resins on difficult-to-bond substrates comprises a complete sequence, from substrate preparation to final curing. Compared with the standard UV resin application process, coating on such substrates involves additional surface‑treatment or primer‑application steps, and places stricter demands on substrate cleanliness and process‑parameter control. Adhering to a standardized procedure is essential for ensuring reliable adhesion and consistent coating quality.

06

2026

/

10

Methods for Using UV Resin on Difficult-to-Adhere Substrates

Methods for Using UV Resin on Difficult-to-Adhere Substrates

In practical production, UV‑curable resins for difficult-to‑adhere substrates must be selected based on the substrate type, product form, and process conditions. Different application methods each have distinct characteristics in terms of coating procedures, adhesion mechanisms, and equipment requirements. A thorough understanding of these methods enables the rational selection of process parameters in real‑world applications, thereby ensuring consistent adhesion performance and production efficiency.

06

2026

/

10

Key Control Points in the UV Resin Process for Difficult-to-Adhere Substrates

Key Control Points in the UV Resin Process for Difficult-to-Adhere Substrates

Process control for UV resins on difficult-to-bond substrates encompasses multiple stages, from substrate pretreatment to complete curing. Compared with conventional UV coating, the adhesion window for such substrates is narrower, and variations in process parameters are more likely to result in reduced adhesion or coating defects. Mastering the key aspects of process control helps ensure consistent adhesion performance and reliable coating quality in production.

30

2026

/

09

Main Process Types of UV Resins for Difficult-to-Bond Substrates

Main Process Types of UV Resins for Difficult-to-Bond Substrates

In practical applications, UV‑curable resins for difficult-to-bond substrates have evolved into a variety of process types, tailored to substrate characteristics, product form, and production conditions. Each process type emphasizes distinct aspects in terms of application methods, adhesion mechanisms, and equipment configurations. Understanding the classification and key features of these processes helps select the most appropriate solution for a given application scenario.

30

2026

/

09

Epoxy Acrylate Oligomer: A Versatile Material for UV-Curable Formulations

Epoxy Acrylate Oligomer: A Versatile Material for UV-Curable Formulations

OEM epoxy acrylate oligomer supply for UV coatings, inks, and adhesives. Custom formulations, stable quality, and bulk production support.

30

2026

/

09

< 1234...162 >