Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Key Considerations for Using UV Resins on Difficult-to-Bond Substrates
Release time:
2026-10-06 23:57
In practical applications, UV resins for difficult-to-bond substrates require careful attention to key process steps, including substrate preparation, coating operations, curing conditions, and environmental control. Compared with conventional UV resins, these formulations have a narrower adhesion window, making them more susceptible to performance degradation from even minor variations in processing parameters. Mastering these critical aspects of use helps ensure consistent adhesion and reliable coating quality in production.
I. Key Points for Substrate Cleaning
The cleanliness of the substrate surface is fundamental to determining adhesion performance. During manufacturing, handling, and storage, substrates such as polypropylene, polyethylene, and polyester may become contaminated with oils, release‑agent residues, dust, and other impurities. These contaminants form an interfacial barrier between the coating and the substrate, preventing direct contact.
Wipe the substrate surface with a dedicated cleaning agent and a soft cloth to remove all types of contaminants. For substrates heavily contaminated with oil, an additional pre‑cleaning step may be required. After cleaning, the substrate should be protected from re‑contamination; operators must wear clean gloves and complete the coating application within the specified time frame. Any moisture on the substrate surface must also be removed, and drying may be necessary if required.
II. Key Points of Surface Treatment
For substrates that are difficult to adhere to, corona treatment, plasma treatment, or flame treatment are commonly used surface activation methods. These processes enhance the substrate’s surface energy by introducing polar functional groups or increasing surface roughness.
The uniformity of the treatment effect requires careful control. During corona treatment, discharge power, processing speed, and electrode spacing all influence the outcome; non-uniform treatment can lead to an uneven distribution of surface energy on the substrate. For plasma treatment, parameters such as gas flow rate, treatment time, and power must be precisely regulated. In flame treatment, flame temperature, treatment duration, and the distance between the flame and the substrate need to be carefully controlled; excessive treatment may damage the substrate surface.
The treated substrate shall be coated within the specified time frame. The effectiveness of the treatment diminishes over time, particularly in high-humidity environments; therefore, production scheduling should ensure that the treated substrate is transferred to the coating process as soon as possible.
III. Key Points for Coating Operations
Coating weight is a critical parameter that influences adhesion performance and coating quality. When the coating weight is too low, the coating fails to fully cover the substrate surface, potentially exposing the substrate in localized areas and resulting in inadequate adhesion. Conversely, when the coating weight is excessive, the coating thickness increases, leading to greater internal stresses during curing shrinkage and exacerbating stress concentrations at the interface.
The application rate should be adjusted according to the substrate type, coating properties, and application method. For substrates with rough or porous surfaces, the application rate should be increased appropriately to fill the micro‑texture. For smooth, dense substrates, the application rate should be carefully controlled to prevent shrinkage‑induced stresses caused by excessively thick coatings. After application, inspect the coating surface for uniformity and check for any areas of missed coverage or material buildup.
IV. Key Points of Curing Conditions
Curing conditions directly affect the crosslink density of the coating and the quality of interfacial adhesion. When the curing energy is insufficient, the coating exhibits low crosslink density and inadequate cohesive strength, making it prone to delamination from the substrate under external forces. Conversely, excessive curing energy leads to increased coating shrinkage and elevated interfacial stresses.
The curing energy must be matched to the coating formulation and coating thickness. For substrates with poor adhesion, staged curing is a commonly employed control strategy: first, pre‑cure at a lower energy level to achieve initial film formation, followed by a higher‑energy cure to ensure thorough deep‑layer crosslinking. Staged curing allows shrinkage stresses to be relieved in stages, thereby reducing stress concentrations at the interface.
For thick coatings or dark-colored systems, it is necessary to select a deep‑curing photoinitiator or appropriately extend the curing time. During curing, ensure that all areas of the workpiece receive uniform exposure to light to prevent insufficient curing in shadowed regions.
V. Key Points of Environmental Control
The temperature and humidity of the application environment significantly affect adhesion. At excessively low temperatures, the coating’s viscosity increases, its wettability decreases, and its ability to spread on the substrate is diminished. At excessively high temperatures, the reactive diluents in the coating may volatilize, compromising coating performance and curing. Application‑environment temperatures are typically maintained within an optimal range.
Humidity significantly affects the coating of substrates that are difficult to adhere to. When humidity is too high, moisture may be adsorbed onto the substrate surface, forming a weak interfacial layer that impedes direct contact between the coating and the substrate. The relative humidity of the application environment should be maintained within an appropriate range; for systems sensitive to humidity, the substrate can be dried prior to coating, and the coating operation should be carried out in a low-humidity environment.
VI. Key Points for Coating Management
The storage conditions of UV‑curable resins on difficult‑to‑adhere substrates significantly affect their performance stability. The photoinitiators in the coating are sensitive to ultraviolet light, so the storage container must be sealed and kept away from light. High temperatures can accelerate chemical reactions within the coating, leading to increased viscosity or changes in performance. The coating should be used within its shelf life, following the first‑in, first‑out principle.
During formulation, it is essential to monitor the compatibility of each component. When the adhesion promoter exhibits poor compatibility with the resin system, phase separation may occur, compromising adhesion performance and storage stability. Thorough mixing is required during preparation to ensure uniform distribution of all ingredients. The formulated coating should be used up within the specified time frame.
VII. Key Points for Interlayer Coordination
In multi‑coat coating systems, intercoat compatibility directly affects the overall adhesion performance. A strong intercoat bond must be established between the primer and the topcoat. If the primer is overcured, its surface becomes excessively dense, making it difficult for the topcoat to wet and penetrate. Conversely, if the primer is undercured, the coating will lack sufficient cohesive strength.
The degree of curing of the primer must be maintained within an appropriate range, ensuring sufficient internal cohesion while preserving adequate surface activity to promote adhesion of the topcoat. Prior to applying the topcoat, inspect the primer’s surface; if contamination or excessive curing is present, perform the necessary remedial treatment. Whenever possible, select matching products from the same supplier for both the primer and the topcoat to ensure interlayer compatibility.
VIII. Conclusion
Key considerations for using UV‑curable resins on difficult‑to‑adhere substrates encompass substrate cleaning, surface preparation, coating application, curing conditions, environmental control, coating management, and intercoat compatibility. Substrate cleaning and surface treatment lay the foundation for adhesion; coating thickness and curing parameters directly influence interfacial bond quality; environmental factors affect application stability and adhesion performance; proper coating management ensures consistent performance; and intercoat compatibility safeguards the reliability of the overall coating system. These factors are interconnected and must be systematically managed in production to achieve stable adhesion and high‑quality coatings.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Boxing Related Product Recommendations – Membrane Materials |
||
| Difficult to adhere to the substrate |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-186 |
Modified epoxy acrylate |
Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| B-509B |
Polyester acrylate |
Good adhesion, good flexibility, and excellent pigment wetting. |
| B-531 |
Polyester acrylate |
Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
| B-546 |
Polyester acrylate |
Good adhesion, fast curing, and excellent flexibility. |
| B-590 |
Polyester acrylate |
Excellent adhesion, fast curing, and good pigment wetting. |
| BM2224 (EO-HDDA) |
Ethoxylation of 1,6-hexanediol diacrylate |
It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |

Share to:
Related News