Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Resin and Formulation for UV Monocoat Systems
Release time:
2015-11-14 10:59
UV monocoat is a new, highly efficient and environmentally friendly coating process. Compared to traditional processes, it boasts higher production efficiency and a better yield of high-quality products. It is foreseeable that this process will bring about technological innovations in an increasing number of fields.
With the continuous upgrading and replacement of laptop products, coating technologies and requirements have been steadily advancing and evolving. To further enhance aesthetic performance, production efficiency, and yield rates, a new process—UV monocoat—has been introduced.

Introduction to the UV Single-Coat Process
UV monocoat—also known as UV single-coat—is a process that combines the traditional two-step application of a plastic primer and a topcoat into a single-layer coating. Compared to conventional methods, this approach offers higher production efficiency and improved yield rates, while also reducing energy consumption—a move that aligns with the broader trend toward energy conservation and environmental protection.

Advantages: Improved production efficiency, reduced energy consumption, and higher yield of good-quality products. The coating film exhibits excellent physicochemical properties, including high hardness, wear resistance, and chemical resistance.
Applications of UV Single-Coating
Main application forms:

Main application areas:
Laptops, tablets, home appliances, motorcycles, bottle caps, and more—UV single-coat applications are continually expanding their scope.
UV Single-Coat Formulation Design
Design formula considerations:
1) The directional alignment of aluminum powder and silver powder, resulting in a metallic texture.
2) Aluminum powder must exhibit stable dispersion, without settling, agglomeration, or oxidation turning black.
3) Deep curing and gloss issues with solid-color paints
4) Adhesion applicability to different materials
Resin Selection
| Formula architecture | Performance and Products |
| Macromolecular resin, cellulose acetate butyrate | Satisfy aluminum powder arrangement Boxing Macromolecular Resin (B-6009, B-6010) |
| Self-curing resin | Achieve deep curing in colored systems. Boxing Self-Curing Resin (B-519) |
| High-grade PUA resin, monomers | Increase crosslinking to meet hardness and wear resistance requirements. Boxing High-ranking Official PUA (B-619W) |
| Others: Anti-sinking aluminum powder, pearlescent powder, color paste, additives, and initiators | |
Boxing UV Single-Coat Resin
New Products: Based on market demand, Boxing Technology has independently developed special functional-group acrylates B-6009 and B-6010.

Product features: Linear structure, high molecular weight, excellent film-forming properties, high double-bond density, high hydroxyl value, and low viscosity. Outstanding aluminum powder orientation and color development, good hardness and abrasion resistance, and excellent storage stability of aluminum powder.
Recommended applications: Suitable for UV aluminum powder coatings, UV solid-color coatings, and thin-film hardening interpenetrating network systems.
Comparison between B-6009 and B-6010
| Project | B-6009 | B-6010 |
| Viscosity (30℃) | 2500-5500 | 15,000–25,000 |
| Solid content % | 58 ± 2 | 58 ± 2 |
| Solvent | Butyl ester | Butyl ester |
| Drying condition | Not dry to the touch | Surface dry |
| Tg | 38-42 | 56-60 |
| Double-bond content | High | Slightly lower |
Reference formula
Application reference formula 1
| Ingredients | Proportion (wt%) |
| B-6009 | 40-50 |
| Auxiliary resin | 15-25 |
| DPHA | 5-10 |
| B-519 (Self-curing resin) | 5-10 |
| Black paste (10% carbon black) | 5-10 |
| Flow agent | 0.1–0.5 |
| Initiator | 2.5–4.5 |
| Additive | 0.5-1 |
Note: Dilute with thinner at a ratio of 1:1 to 1.2.
Application Reference Formula 2
| Ingredients | Proportion (wt%) |
| B-6009 | 30-40 |
| Auxiliary resin | 15-25 |
| DPHA | 5-10 |
| B-619W (6-channel PUA) | 10-20 |
| AI (Electroplating-like) | 5-8 |
| Flow agent | 0.1–0.5 |
| Initiator | 2.5–4.5 |
| Additive | 0.5-1 |
Note: Dilute with thinner at a ratio of 1:1 to 1.2.
Sample Display

Share to:
Related News
Classification and Comparison of Silicone UV Resins
Silicone UV resin, chemically known as light-curable organosiloxane, combines the excellent properties of silicones with the high efficiency and energy-saving advantages of light curing. This article provides a detailed introduction to its curing mechanism, classification and comparison, as well as product information.
UV gel polish is a nail art material that cures using ultraviolet light. Compared to traditional gel polishes, UV gel polish boasts higher hardness and glossiness, and it can cure rapidly, making manicures last longer. However, the application process for UV gel polish is more complex than that of traditional gel polishes and requires specific techniques and equipment.
3D printing (3DP) is a type of rapid prototyping technology. It’s a technique that uses digital model files as a basis and employs bondable materials—such as powdered metals or plastics—to build objects layer by layer through additive manufacturing. The working principle of a 3D printer in everyday life is essentially the same as that of a conventional printer, except that the printing materials differ: while conventional printers use ink and toner, a 3D printer contains actual raw materials.