Classification and Comparison of Silicone UV Resins


Silicone UV resin, chemically known as light-curable organosiloxane;

Combines the excellent performance of silicone with the high efficiency and energy-saving advantages of UV curing.

This article provides a detailed introduction to its curing mechanism, classification and comparison, as well as product information.

Organic polysiloxane

The first industrially applied elemental polymer is widely used in dozens of fields, including electrical and electronic engineering, chemical industry, aerospace, and healthcare.

Low surface tension, resistance to high and low temperatures, radiation resistance, oxidation resistance, high gas permeability, weather resistance, demolding properties, hydrophobicity, and physiological inertness, among others;

Light-curable organic polysiloxanes are highly favored because they combine the excellent properties of organosilicon materials with the efficiency and energy-saving advantages of light-curing technology.

Curing Mechanism (Free Radical vs. Cationic)

Curing mechanism Curing rate Volume shrinkage Adhesion Oxygen inhibition Stability Cost Photosensitive group
Free radical system Faster Larger Weak Obvious Better Low Acryloyl group, acrylamide group
Cationic system Slower Smaller Strong No impact Poorer Higher Epoxide group, vinyl ether, styryl

There is considerable research on free-radical silicone photopolymerization systems, but they have obvious drawbacks: curing requires nitrogen protection and the process is complex.

Cationic organosilicon photopolymerization systems have developed rapidly in recent years; however, the photoinitiators are expensive and significantly affected by environmental moisture.

Classification of Silicone UV Resins (5 Major Categories)

1. Thiol-ene functionalized polysiloxanes

This system features fast photoresponse, is unaffected by oxygen-induced polymerization inhibition, and can form a flexible, elastic cured film. However, the thiols in this system have a strong odor and exhibit poor storage stability.

2. Styryl polysiloxane

The styryl group is also photosensitive. The inexpensive styrene and its derivatives exhibit excellent copolymerization properties with many resins, enhancing the hardness and mechanical strength of the cured film.

This system also has several drawbacks, such as high volatility, high flammability, strong odor, and relatively slow reaction speed. Moreover, its curing performance is inferior to that of other light-curing systems.

3. Vinyl Ether-Functionalized Polysiloxane

The lone pair of electrons on the oxygen atom conjugates with the carbon-carbon double bond, increasing the electron cloud density of the double bond. Therefore, the carbon-carbon double bond in vinyl ethers is an electron-rich double bond, and its reactivity is higher than that of typical olefin monomers.

It is capable of undergoing free-radical polymerization, cationic polymerization, and alternating copolymerization via charge-transfer complexes. Consequently, vinyl ether-based polysiloxanes can be applied in a variety of UV-curable systems, including free-radical systems, cationic systems, and hybrid systems.

High reactivity, low toxicity, low odor, and high viscosity make photopolymerizable silicone prepolymers an ideal choice; however, the raw material vinyl ether is relatively expensive.

4. Epoxy-functionalized polysiloxane

When the epoxy group undergoes cationic photopolymerization, the strained epoxy ring opens up to form a strain-free ether bond, resulting in very little or even zero volumetric shrinkage—this is one of its major advantages.

Currently, epoxy-functional polysiloxane UV-curable systems are becoming increasingly widespread and have become the mainstream product in cationic UV-curing systems.

5. Acrylate-modified polysiloxane

Acrylate-based systems generally exhibit high photopolymerization reactivity and fast reaction rates, with excellent chemical and physical stability in the cured film. They offer a variety of synthesis methods, and by adjusting the formulation, it is possible to achieve ideal viscosity. Moreover, these systems possess a certain resistance to oxygen-induced inhibition, making them the most widely used prepolymers in current UV-curable products and also the most actively researched silicon-based UV-curable systems.

Comparison of Different Types of Silicone UV Resins

Types Thiol-vinyl Styryl Vinyl ether Epoxy group Acrylate-based
Functional group
Mechanism Free radical Free radical Free radicals, cations Cation Free radical
Curing rate Quick Slower Quick Slower Quick
Oxygen inhibition Lower Lower Lower None Higher
Smell Smell of rotten eggs Highly volatile, with a strong toxic odor. Low toxicity, low odor Low toxicity, low odor Lower odor
Cost Higher Low Higher Lower Lower
Shrinkage rate Larger Larger small Very small Larger

Conclusion

Different types of silicone UV resins each have their own advantages and disadvantages. Among them, acrylate- and epoxy-functionalized polysiloxanes exhibit the best overall performance and are the most widely used, while vinyl ether-functionalized polysiloxanes hold great potential for future development.

Organosilicon UV Resin Product Information

1. Bossin Silicone UV Resin B-818

Product Features: B-818 is an acrylate-modified silicone UV resin that is solvent-free and boasts high UV-curing activity, excellent compatibility, and resistance to yellowing. The cured coating exhibits high hardness and outstanding resistance to graffiti, scrubbing with steel wool, and abrasion. The incorporation of silicone components can rapidly reduce the surface tension of the system, enhancing the mirror-like leveling effect of the coating film. When used as the main resin, it not only provides oil resistance, anti-graffiti performance, and resistance to steel-wool abrasion but also ensures more uniform matting in matte systems, delivering a smooth and silky touch sensation.

Recommended applications: Particularly suitable for a variety of plastic and plastic-coated UV topcoats, metallic UV coatings, vacuum-plated topcoats, PVC surface gloss coatings, UV coatings for polishing and hardening wood flooring and cabinet panels, as well as UV inks.

Test item B-828 B-818
Launch time August 2014 September 2015
Appearance Semi-transparent liquid Clear and transparent liquid
Viscosity (cps/30℃) 15,000–20,000 5000-10000
Functionality 5 6
Halogen Cl content (ppm) 800 0
Leveling/Fullness Excellent Excellent
Adhesion (plastic sheet) 5B 5B
UV system compatibility General Good
Hardness F H
Steel wool resistant <30 times 500 times
Yellowing (after one pass through the UV machine) Yellow Pale yellow
Oil-resistant pen-spraying system >50 times >50 times
Oil-resistant pen-roller coating system 0 times >30 times

2. Bossin Silicone UV Resin B-828

Product Features: B-828 is a silicone-modified polyurethane acrylate oligomer with an effective solids content approaching 100%. It is solvent-free and exhibits high UV-curing activity. The incorporation of silicone components can rapidly reduce the surface tension of the system; even a small addition to the formulation can significantly enhance the mirror-like leveling effect of the coating film. When used as the main resin, the high-gloss formulation offers oil resistance and graffiti-proof performance, while the matte formulation ensures more uniform matting and provides a smooth, silky touch.

3. Bossin Silicone UV Resin B-811

Product Features: B-811 is a silicone-modified polyurethane acrylate oligomer with an effective solids content approaching 100%. It is solvent-free, exhibits excellent compatibility, has a hardness of 4B, and demonstrates outstanding flexibility. The incorporation of silicone components can rapidly reduce the surface tension of the system, thereby enhancing the mirror-like leveling performance of the coating film.

Reminder: Silicone resins have extremely low surface tension, so it’s necessary to test their compatibility and formulation stability.

 

Share to:

Related News


UV gel polish

UV gel polish is a nail art material that cures using ultraviolet light. Compared to traditional gel polishes, UV gel polish boasts higher hardness and glossiness, and it can cure rapidly, making manicures last longer. However, the application process for UV gel polish is more complex than that of traditional gel polishes and requires specific techniques and equipment.


3D printing

3D printing (3DP) is a type of rapid prototyping technology. It’s a technique that uses digital model files as a basis and employs bondable materials—such as powdered metals or plastics—to build objects layer by layer through additive manufacturing. The working principle of a 3D printer in everyday life is essentially the same as that of a conventional printer, except that the printing materials differ: while conventional printers use ink and toner, a 3D printer contains actual raw materials.


PVC floor coating

PVC flooring is a highly popular, lightweight new-type floor covering material widely used around the world today—also known as "lightweight flooring." It’s a product that has gained immense popularity in Europe, the U.S., and Asian countries such as Japan and South Korea, and has become a global sensation. Since its introduction to the Chinese market in the early 1980s, it has now achieved widespread recognition and extensive use in major and medium-sized cities across China—in a wide variety of settings, including homes, hospitals, schools, office buildings, factories, public spaces, supermarkets, commercial establishments, and more.