Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Structural Analysis of Scratch Resistance in UV-Curable Coatings and Related Factors
Release time:
2014-06-14 08:45
Structural Analysis of Scratch Resistance in UV-Curable Coatings and Related Factors
Scratch resistance and abrasion resistance are both distinct yet interconnected. The key difference between the two is that abrasion penetrates deeper into the coating film, whereas scratch resistance affects only the surface layer but can still degrade the appearance. Scratches represent a major issue for automotive coatings, especially for the topcoat clear coat. During car washing, certain coatings may develop visible scratches that reduce their gloss. Scratch resistance is also crucial in protecting wood flooring and transparent plastic coatings, including applications such as scratch-resistant protection for polycarbonate window panes or eyeglass lenses.
The physical phenomena underlying abrasion are complex and vary depending on how each person describes them. Several models have been developed to depict the interaction between a hard object sliding across the surface of a viscoelastic material. One such model divides the material's response into elastic, plastic, and fracture components. The elastic response essentially recovers immediately; only plastic deformation and cracking lead to abrasion. Qualitatively speaking, abrasions caused by plastic deformation exhibit a distinct "shoulder," whereas those caused by fracture do not. An advantage of this simplified three-component model is that its responses can be quantitatively measured using scanning probe microscopy. Most paint films exhibit all three types of response—elastic, plastic, and fracture—during abrasion. However, the responses of different paint films can vary significantly. Moreover, even for the same paint film, the response can differ dramatically depending on the magnitude or speed of the applied abrasion stress. Some paint films exhibit a more complex behavior: their abrasions gradually heal through a process called creep, further complicating the overall picture.
The relationship between scratch resistance and the chemical structure of paint films is still under investigation, and systematic research reports on this topic are relatively scarce. Generally speaking, polyurethane paints typically exhibit superior abrasion resistance; however, surprisingly, their scratch resistance tends to be relatively poor. This phenomenon can be explained by the distinction between surface properties and bulk properties. Research using scanning probe microscopy has revealed the presence of a deformable, plastic-like layer on acrylic polyurethane clear-coat films. The newly developed nanomechanical analyzer, which can measure mechanical properties near the surface, may prove helpful in further investigating these surface characteristics.
There are two main approaches to designing scratch-resistant coatings: either making the coating extremely hard so that abrasives cannot penetrate too deeply into the surface, or endowing it with sufficient elasticity to allow it to rebound once the abrasive stress is removed. While increasing the hardness of the paint film may enhance its wear resistance, it could also lead to cracking or chipping. The flexibility of the paint film is another critical factor influencing its resistance to cracking. For instance, in polyurethane-acrylate materials, introducing long-chain polyether and polyester segments, and substituting harder isophorone diisocyanate (IPDI) with more flexible hexamethylene diisocyanate (HDI), can significantly improve flexibility. However, if the hardness becomes too low, the paint film’s structure, subjected to greater deformation energy, might experience detachment or breakage of its cross-linking network, thereby undermining its scratch resistance. Furthermore, acrylic resins modified with organosilicon compounds exhibit even greater improvements in wear resistance. Courter proposed that the paint film with the highest scratch resistance should be neither brittle nor overly soft—rather, it should strike a balance between these two extremes. In this way, high toughness minimizes plastic flow and, by reducing brittleness, keeps the likelihood of cracking to an absolute minimum. Courter’s paper provides an insightful review, attempting to link scratch resistance directly to the bulk mechanical properties of the material. Yet, these studies have not yet led to a universally applicable theory of scratch resistance. This is understandable, given that the near-surface mechanical properties of a paint film can differ dramatically from those of the bulk material itself.
Another issue related to scratch resistance is metal marking. When the edges or corners of a metal object rub against the paint film, a dark line sometimes remains on the surface—this is caused by metal particles being rubbed off. A common method for testing resistance to metal marking involves scratching the paint film with a coin. Metal marking typically occurs on harder paint films. Reducing the surface tension of the paint film and thereby lowering its coefficient of friction can help minimize or even prevent this phenomenon, as the metal will simply slide over the surface instead of leaving marks. The addition of additives can enhance smoothness. Modified polysiloxanes have been reported to be particularly effective in this regard. It is crucial to carefully select specific silicone-based additives and determine their appropriate dosage in order to reduce scratches, scuffs, and metal marking without introducing other defects, such as cratering.
Share to:
Related News
Basic Performance Requirements for Vacuum Coating Coatings
The basic performance requirements for vacuum coating materials include: the ability to deposit under vacuum conditions to form a uniform, dense, and high-quality coating; excellent adhesion between the coating and the substrate, ensuring that the coating is resistant to peeling and flaking; superior optical properties and chemical stability of the coating; and a coating surface free from any visible defects. In addition, depending on specific application requirements, the materials may also need to meet other performance criteria, such as hardness, wear resistance, and electrical conductivity.
Precautions for Light-Curing Vacuum Coating Coatings
Light-curing vacuum coating coatings are widely used. When using light-curing vacuum coating coatings, it is important to pay attention to the following points in order to obtain coatings with excellent performance.
Performance Characteristics of Light-Curing Vacuum Coating Coatings
Vacuum coating coatings feature rapid curing, high efficiency, low energy consumption, minimal pollution, excellent performance, and a wide range of applications, making them a highly important surface treatment technology.