Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Introduction to Low-Molecular-Weight Oligomers in Light-Curing Coatings
Release time:
2014-06-16 09:31
In light-curable coatings, oligomers are equivalent to resins in conventional coatings—they both serve as film-forming substances. Their properties play a crucial role in determining the overall performance of the coating. Structurally, oligomers must possess photocurable functional groups, such as various unsaturated double bonds or epoxy groups, making them photosensitive resins. Among all the components of a light-curable coating, oligomers constitute the main body of the formulation; their properties essentially dictate the key performance characteristics of the cured material. Therefore, the synthesis and selection of oligomers undoubtedly represent an important step in the formulation design of light-curable coatings.
The oligomers used in free-radical photopolymerization are primarily various acrylic resins, such as epoxy acrylate resins, polyurethane acrylate resins, polyester acrylate resins, polyether acrylate resins, and acrylate resins. Among these, epoxy acrylate resins and polyurethane acrylate resins are the most widely used in practical applications. Oligomers used in cationic photopolymerization coatings contain either epoxy groups or vinyl ether groups, such as epoxy resins and vinyl ether resins. When selecting oligomers for photopolymerization coatings, the following factors should be considered comprehensively: low viscosity, fast photopolymerization speed, excellent physical and mechanical properties, glass transition temperature, curing shrinkage rate, and low toxicity and low irritation potential.
Unsaturated polyesters are generally used in UV-curable wood coatings. They have relatively low costs, nearly comparable to those of conventional solvent-based coatings. As the prices of other types of oligomers continue to decline and their performance significantly surpasses that of unsaturated polyester systems, the market share of unsaturated polyesters has been gradually shrinking. Epoxy-acrylate resins are relatively easy to synthesize and their prices have steadily approached those of unsaturated polyesters. They exhibit excellent performance in terms of curing speed, hardness of the cured film, resistance to solvents, corrosion resistance, tensile strength, and adhesion to most substrates, offering high cost-effectiveness. As a result, they have become the material of choice for current UV-curable coating formulations. The drawback of epoxy-acrylates is that their cured products tend to be hard and brittle; therefore, they are typically used in combination with 2-ethylhexyl acrylate, second-generation acrylate reactive diluents, or resins with better flexibility.
Polyurethane acrylates, depending on their structural characteristics, can produce both highly rigid cured films and coatings with excellent flexibility. In coatings applications, polyurethane acrylates with longer soft segments are typically used. The primary characteristic of polyurethane acrylates is that their cured films exhibit outstanding flexibility, as well as excellent adhesion to most substrates and superior corrosion resistance. However, their overall synthesis cost is relatively high. Additionally, their photo-curing rate is slightly slower than that of epoxy acrylates. Polyurethane acrylates are often blended with epoxy acrylates and multifunctional acrylate reactive diluents.
Polyester acrylates have lower viscosity and lower costs, and their photocuring speed is generally moderate. High-functional polyester acrylates exhibit excellent wetting properties for pigments and can be used in UV-curable coatings. Polyester acrylates are seldom used alone in UV-curable coatings; they are typically combined with commonly used resins such as epoxy acrylates and polyurethane acrylates. Acrylic resin oligomers are rarely used alone in the UV-curable coatings industry due to their relatively high molecular weight and viscosity. However, these oligomers have lower shrinkage during curing, which helps improve the adhesion of the cured film. Carboxyl-modified acrylic resin oligomers can effectively stabilize pigment dispersion in pigment-based coloring systems. Therefore, these oligomers can be used appropriately as functional auxiliary resins in UV-curable coating formulations.
Share to:
Related News
Structural Analysis of Scratch Resistance in UV-Curable Coatings and Related Factors
Abrasion resistance refers to the ability of a material’s surface to withstand friction and scratching. It is one of the important properties of materials, directly affecting the appearance of objects and playing a crucial role in determining the service life and safety of the material. It is an important factor that needs to be considered.
Basic Performance Requirements for Vacuum Coating Coatings
The basic performance requirements for vacuum coating materials include: the ability to deposit under vacuum conditions to form a uniform, dense, and high-quality coating; excellent adhesion between the coating and the substrate, ensuring that the coating is resistant to peeling and flaking; superior optical properties and chemical stability of the coating; and a coating surface free from any visible defects. In addition, depending on specific application requirements, the materials may also need to meet other performance criteria, such as hardness, wear resistance, and electrical conductivity.
Precautions for Light-Curing Vacuum Coating Coatings
Light-curing vacuum coating coatings are widely used. When using light-curing vacuum coating coatings, it is important to pay attention to the following points in order to obtain coatings with excellent performance.