News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Product Recommendation: BM6263 (DPHA-90)

Release time:

2025-03-25 10:30

Product Recommendation: BM6263 (DPHA-90)
Product Recommendation: BM6263 (DPHA-90)

1

Keywords

Dipentaerythritol hexaacrylate, with enhanced hardness and abrasion resistance.

2

Introduction

DPHA-90 is a dipentaerythritol hexaacrylate synthesized from dipentaerythritol. It features fast curing speed, high cross-linking density, high hardness, and excellent wear resistance.

3

Basic parameters

Note:

Mechanical Property Test Formula: B-296 : DPHA-90 : TPGDA : Photoinitiator 1173 = 50 : 30 : 20 : 3

4

Specific Application Testing

Take the application in PCB photoresist solder mask green oil as an example;

Photosensitive Green Oil Main Agent A:

Hardener B:

Mix the photosensitive green oil main agent A and the curing agent B at a ratio of 3:1 until thoroughly homogeneous, then use 100T mesh screen printing for testing.

Note: Compared with the commercially available DPHA-90, it exhibits similar performance in terms of development characteristics, reaction speed, ink hardness, adhesion, gloss, and solder resistance, meeting the product requirements.

5

Application Scenario Recommendations

Compared with other resin formulations, it is widely used in fields such as UV hardening liquids, PVC hardening coatings, PCB inks, UV offset inks, and UV coatings for plastics.

Share to:

Previous page

Product Recommendation: UV Offset Printing Ink Resin B-560

Product Recommendation: BM6261 (DPHA-80)

Next page

Related News

New Product Recommendation: 6-Component Polyurethane B-6211

B-6211 is a six-component polyurethane acrylate with high hardness, excellent toughness, good abrasion resistance, fast curing speed, and excellent water resistance.

Product Recommendation: UV Offset Printing Ink Resin B-560

B-560 is a low-viscosity, four-functional polyester acrylate with fast UV/LED curing speed, minimal yellowing, excellent pigment wetting, outstanding abrasion resistance, and high gloss in the cured coating.

Product Recommendation: BM6261 (DPHA-80)

DPHA-80 is a cost-effective dipentaerythritol hexaacrylate with medium viscosity, fast curing speed, high photosensitivity, and excellent properties such as high hardness and superior abrasion resistance.