New Product Recommendation: 6-Component Polyurethane B-6211


1

Keywords

High-grade polyurethane acrylate, excellent water resistance, hard, tough, and wear-resistant. 。

2

Introduction

B-6211 is a six-component polyurethane acrylate with high hardness, excellent toughness, good abrasion resistance, fast curing speed, and excellent water resistance; it contains no... Organotin 。

3

Basic Bonding and Performance Testing

4

Water resistance test

Test formulation: Test resin: B-6016; Photoinitiator 1173; Mixed solvent = 30:30:5:35;

After thorough mixing, spray it onto a PC whiteboard, bake at 60℃ for 3 minutes, and then cure with UV light.

Results of the comparative performance test of different PUAs.

Note: B-619W is a 6-inch PUA with excellent toughness.

5

Water resistance test

3C, thin-film hardening, and related fields.

Share to:

Related News


New Product Recommendation: UV-Heat Dual-Cure Resin B-6210

B-6210 is a polyurethane acrylate that can be combined with isocyanates to form functional coatings via a UV-thermal dual-curing process. This resin features low viscosity, high curing speed, and produces cured coatings that are both hard and tough, with excellent chemical resistance as well as outstanding weathering performance—including resistance to high-and-low temperature cycling, impact, and salt spray.


Product Recommendation: UV Offset Printing Ink Resin B-560

B-560 is a low-viscosity, four-functional polyester acrylate with fast UV/LED curing speed, minimal yellowing, excellent pigment wetting, outstanding abrasion resistance, and high gloss in the cured coating.


Product Recommendation: BM6263 (DPHA-90)

DPHA-90 is a dipentaerythritol hexaacrylate synthesized from dipentaerythritol. It features fast curing speed, high cross-linking density, high hardness, and excellent wear resistance.