Introduction to UV Wood Coatings


In the fields of modern home décor and furniture manufacturing, wood products are highly prized for their natural texture and warm, inviting ambiance. However, to comprehensively enhance wood’s durability, aesthetic appeal, and functional performance, surface coating technology plays a crucial role. While traditional wood coatings offer a degree of protection, they suffer from drawbacks such as slow drying times, high VOC emissions, and substantial energy consumption. In response to increasingly stringent environmental regulations and growing consumer demand for healthier living, UV-curable wood coatings—boasting rapid curing, zero solvent emissions, and exceptional hardness and wear resistance—are steadily emerging as the mainstream solution for wood surface finishing.

I. Definition and Principle of UV Wood Coatings

UV wood coatings are environmentally friendly coatings that undergo a photochemical reaction upon exposure to ultraviolet light, causing the liquid resin to crosslink and cure into a film in a short time. The core components include photopolymerizable resins, reactive diluents, photoinitiators, and additives. After the coating is applied to the wood surface, irradiation with UV light of a specific wavelength causes the photoinitiator to decompose and generate free radicals, which initiate a chain polymerization reaction between the resin and the diluent, forming a dense three-dimensional network structure. The entire curing process takes only a few seconds to several tens of seconds, significantly enhancing production efficiency.

II. Main Performance Features

1. Fast curing speed

UV wood coatings cure within seconds to tens of seconds under UV irradiation, significantly shortening the coating cycle and meeting the demands of continuous production-line operations.

2. Excellent coating performance

The cured coating forms a crosslinked network structure, exhibiting excellent hardness, wear resistance, and chemical resistance, thereby providing effective protection for wood substrates.

3. Outstanding environmental protection features

UV coatings feature high solids content and either contain no volatile organic compounds or only trace amounts, resulting in low emissions during the curing process. Waterborne UV coatings further enhance environmental performance, aligning with the current trend toward green manufacturing.

4. High material utilization rate

UV coatings do not emit volatile organic compounds during application, and overspray can be recovered and reused through a recycling system, resulting in high overall material utilization.

III. Wide-ranging Industry Applications

UV wood coatings have an extremely broad range of applications, covering numerous wood-product sectors such as furniture, wooden doors, flooring, and handicrafts. In furniture manufacturing, they provide high-quality surface finishes for solid-wood furniture, panel furniture, and other types, thereby enhancing the overall quality and added value of the products. For wooden-door products, UV coatings improve wear resistance and weatherability, ensuring that the doors maintain excellent appearance and performance over long-term use.

In the flooring industry, the application of UV wood coatings is particularly widespread. Their high hardness and excellent abrasion resistance effectively protect the floor surface from scratches and wear, while their superior chemical resistance ensures compatibility with a wide range of cleaning agents used in daily cleaning and maintenance. Moreover, the rapid curing properties of UV coatings significantly boost production efficiency, meeting the demands of large-scale manufacturing.

In the crafts industry, UV wood coatings can imbue wooden handicrafts with vibrant colors and a distinctive texture, enhancing their artistic and collectible value. Whether it’s exquisite wood carvings, wooden ornaments, or creative wooden accessories, UV coatings can add brilliant hues and long-lasting protection.

IV. Conclusion

UV wood coatings, with their high efficiency, environmental friendliness, and superior performance, are leading the wood-products coating industry into a new era of green manufacturing. Driven by continuous advancements in materials science and coating technologies, UV coatings will play an increasingly pivotal role in enhancing product quality, reducing environmental impact, and meeting personalized customer needs, thereby becoming the dominant technological trend in the future of wood-coating applications.

Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove it promptly.

Bossin Recommended Products – UV Wood Coatings

Putty primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

Sanding primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-163

Modified epoxy acrylate

Good flexibility, excellent pigment wetting, and strong adhesion.

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

Apply primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-02

Phosphate ester acrylate

Enhances adhesion to substrates such as metal, glass, and plastic.

B-05

Phosphate ester acrylate

Enhances adhesion to substrates such as metal, glass, and plastic.

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-165

Modified epoxy acrylate

Good flexibility and strong adhesion

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

B-535

Polyester acrylate

Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.

B-546

Polyester acrylate

Good adhesion, fast curing, and excellent flexibility.

White primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

B-529

Polyester acrylate

Good adhesion, low shrinkage, and excellent resin compatibility.

B-560

Polyester acrylate

Fast curing and excellent pigment wetting

Gloss topcoat

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-163

Modified epoxy acrylate

Good flexibility, excellent pigment wetting, and strong adhesion.

B-165

Modified epoxy acrylate

Good flexibility and strong adhesion

B-21C

Active amine photosensitizing promoter

Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate

B-301

Aromatic Polyurethane Acrylate

Fast curing, good toughness, and excellent grindability.

B-302

Aromatic Polyurethane Acrylate

Fast curing, high strength, good toughness, and excellent grindability.

B-574C

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

B-601

Aromatic Polyurethane Acrylate

High hardness, scratch resistance, chemical resistance, and excellent cost performance.

B-609

Aliphatic polyurethane acrylate

Fast curing, high hardness, scratch resistance, and chemical resistance.

B-868

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-868H

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-910A2

Aliphatic polyurethane acrylate

Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.

B-912

Aliphatic polyurethane acrylate

Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.

Matte topcoat

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-163

Modified epoxy acrylate

Good flexibility, excellent pigment wetting, and strong adhesion.

B-21C

Active amine photosensitizing promoter

Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate

B-328M

Aliphatic polyurethane acrylate

Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.

B-328R

Aliphatic polyurethane acrylate

Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.

B-333

Aliphatic polyurethane acrylate

Low viscosity, excellent matting effect, good wetting properties, and excellent flexibility.

B-572

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

B-650A

Aliphatic polyurethane acrylate

Low viscosity, excellent matting effect, fast curing, and good wettability.

B-868

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-868H

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-910A2

Aliphatic polyurethane acrylate

Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.

B-912

Aliphatic polyurethane acrylate

Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.

Bright White Finish

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-301

Aromatic Polyurethane Acrylate

Fast curing, good toughness, and excellent grindability.

B-302

Aromatic Polyurethane Acrylate

Fast curing, high strength, good toughness, and excellent grindability.

B-560

Polyester acrylate

Fast curing and excellent pigment wetting

B-574C

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

B-601

Aromatic Polyurethane Acrylate

High hardness, scratch resistance, chemical resistance, and excellent cost performance.

B-868

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-868H

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-912

Aliphatic polyurethane acrylate

Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.

Adherent

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-05

Phosphate ester acrylate

Enhances adhesion to substrates such as metal, glass, and plastic.

B-509B

Polyester acrylate

Good adhesion, good flexibility, and excellent pigment wetting.

B-531

Polyester acrylate

Good adhesion, impact resistance, excellent flexibility, and yellowing resistance.

B-535

Polyester acrylate

Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.

B-546

Polyester acrylate

Good adhesion, fast curing, and excellent flexibility.

B-590

Polyester acrylate

Excellent adhesion, rapid curing, and good pigment wetting.

Filler type

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

B-529

Polyester acrylate

Good adhesion, low shrinkage, and excellent resin compatibility.

Color correction

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-560

Polyester acrylate

Fast curing and excellent pigment wetting

Harden

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-301

Aromatic Polyurethane Acrylate

Fast curing, good toughness, and excellent grindability.

B-302

Aromatic Polyurethane Acrylate

Fast curing, high strength, good toughness, and excellent grindability.

B-560

Polyester acrylate

Fast curing and excellent pigment wetting

B-574C

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

B-601

Aromatic Polyurethane Acrylate

High hardness, scratch resistance, chemical resistance, and excellent cost performance.

B-912

Aliphatic polyurethane acrylate

Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.

Matte

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-328M

Aliphatic polyurethane acrylate

Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.

B-328R

Aliphatic polyurethane acrylate

Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.

B-329D

Aliphatic polyurethane acrylate

Low irritation, low viscosity, excellent wettability, and a pleasant feel.

B-333

Aliphatic polyurethane acrylate

Low viscosity, excellent matting effect, good wetting properties, and excellent flexibility.

B-650A

Aliphatic polyurethane acrylate

Low viscosity, excellent matting effect, fast curing, and good wettability.

Solid-color paint

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-519

Self-curing polyester acrylate

Self-initiated photopolymerization performance

B-530

Polyester acrylate

Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting

B-560

Polyester acrylate

Fast curing and excellent pigment wetting

Yellowing resistance

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-431

Cycloaliphatic Specialty Acrylates

Yellowing resistance, excellent wettability, low viscosity, and fast curing

Dip coating

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

Roll coating

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-100

Bisphenol A epoxy acrylate

High hardness, high gloss, excellent chemical resistance, and high fullness.

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-163

Modified epoxy acrylate

Good flexibility, excellent pigment wetting, and strong adhesion.

B-165

Modified epoxy acrylate

Good flexibility and strong adhesion

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

Solvent-free spraying

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-251

Aromatic Polyurethane Acrylate

Fast curing, excellent flexibility, and good wetting of black ink pigments.

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-574C

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

LED-UV

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-21C

Active amine photosensitizing promoter

Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate

B-27

Active amine photosensitizing promoter

Low color number, benzene-free, low odor, antioxidant and anti-polymerization

B-570

Polyester acrylate

Low viscosity, benzene-free, low odor, suitable for LED UV

B-574

Polyester acrylate

Benzene-free, low odor, and VOC levels meet cigarette pack standards.

B-574C

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

Excimer lamp

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-241

Aliphatic polyurethane acrylate

Fast curing, excellent skin feel, and yellowing resistance.

Skin feel

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-165

Modified epoxy acrylate

Good flexibility and strong adhesion

B-241

Aliphatic polyurethane acrylate

Fast curing, excellent skin feel, and yellowing resistance.

B-328M

Aliphatic polyurethane acrylate

Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.

B-328R

Aliphatic polyurethane acrylate

Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.

B-574C

Polyester acrylate

Low viscosity, low odor, excellent wettability; suitable for LED UV.

B-868

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

B-868H

Organosilicon UV-Curable Resin

Excellent leveling, smooth finish, fast curing, and stain resistance.

Single-item recommendation

Product Model/English Abbreviation

Product Name/Product Type

Product Features

BM2223 (TPGDA)

Di(propylene glycol) diacrylate

Good flexibility and low volatility

BM2224 (EO-HDDA)

Ethoxylated 1,6-hexanediol diacrylate

Good adhesion to plastics, good dilutability, and low volatility.

BM3231 (TMPTA)

Trimethylolpropane triacrylate

High crosslink density, high hardness, high gloss, and excellent wear resistance.

BM3235 (PET3A)

Pentaerythritol triacrylate

Fast curing, high crosslink density, high hardness, and excellent chemical resistance.

BM3380 (3EO-TMPTA)

Tripropylene Glycol Triacrylate

More flexible and less irritating than TMPTA.

BM6261 (DPHA-80)

Dipentaerythritol hexaacrylate

High crosslink density, high hardness, chemical and wear resistance, and water resistance.

BM6263 (DPHA-90)

Dipentaerythritol hexaacrylate

High crosslink density, high hardness, chemical and wear resistance, and water resistance.

Share to:

Related News