Introduction to the Main Raw Materials and Synthesis Overview of Light-Curing Resins


I. Main Raw Materials for Light-Curing Resins

1. Epoxy acrylate raw materials: (1) Bisphenol A-type epoxy; (2) Phenolic epoxy; (3) Ortho-methyl phenolic epoxy.

2. Polyurethane acrylate raw materials: (1) Polyether polyol; (2) Polyester diol; (3) Polycarbonate diol.

II. Bisphenol A-type epoxy

1. Bisphenol A-type epoxy resin is produced by the polymerization of bisphenol A with an excess of epichlorohydrin and in the presence of an alkali catalyst. This is a polycondensation reaction, and the overall reaction equation is as follows:

The structural formula is as follows:

2. Each structural unit of bisphenol A-type epoxy resin imparts specific functions to the resin:

(1) The epoxy and hydroxyl groups impart reactivity to the resin;

(2) The hydroxyl group is a polar functional group that helps enhance wettability and adhesion.

(3) Ether bonds and C-C bonds impart flexibility to macromolecules;

(4) The benzene ring imparts heat resistance and rigidity to the polymer;

(5) The C-O bond has a high bond energy, thereby enhancing alkali resistance.

3. Specific reaction decomposition process:

4. After a cyclic process involving open-loop and closed-loop reactions, the final product is a macromolecule forming epoxy resin:

Note:

(1) n = 0–2, low molecular weight, liquid at room temperature.

(2) n = 2–5, with a medium relative molecular mass; solid at room temperature, with a softening point ranging from 50°C to 90°C.

(3) When n > 5, the epoxy value, a relative molecular mass indicator, ranges from 0.48 to 0.54 mol/100 g; at room temperature, it is solid, with a softening point exceeding 100°C.

5. Process Flow:

6. Name of Bisphenol A epoxy resin:

E-51 epoxy resin, with an epoxide value ranging from 0.48 to 0.54 mol/100g.

7. Introduction to Technical Specifications of Domestic Bisphenol A Epoxy Resin:

Domestic model Main technical specifications Similar models from overseas
Epoxide value (eq/100g) Softening point/℃ Organochlorine (mol/100g) Inorganic chlorine (mol/100g)

Shell

Company Epon

Ciba-Giegy

Araldite

E-55 (616) 0.55–0.56   ≤0.02 ≤0.001    
E-51 (618) 0.48–0.54 ≤2.5 ≤0.02 ≤0.001    
E-44 (6101) 0.41–0.47 12-20 ≤0.02 ≤0.001    
E-42 (634) 0.38–0.45 21-27 ≤0.02 ≤0.001 834  
E-35 (637) 0.30–0.40 20-35 ≤0.02 ≤0.005    
E-20 (601) 0.18–0.22 64-76 ≤0.02 ≤0.001 1001 6071, 7071
E-12 (604) 0.09–0.14 85-95 ≤0.02 ≤0.001 1004 6064, 7004
E-06 (607) 0.04–0.07 110-135 ≤0.02 ≤0.001 1007 6097, 7097
E-03 (609) 0.02–0.045 135-155 ≤0.02 ≤0.001 1009 6099, 6609

III. Phenolic Epoxy

In an acidic medium, phenol undergoes polycondensation with formaldehyde to yield a linear phenolic resin, which is then further condensed with excess epichlorohydrin in the presence of sodium hydroxide. The structural formula is as follows:

Compared with bisphenol A-type epoxy resins, phenolic epoxy resins have more than two epoxy groups in their molecular structure, resulting in a higher cross-linking density after curing. Consequently, these resins exhibit improved thermal resistance, solvent resistance, chemical resistance, and dimensional stability. However, the products tend to become more brittle and show reduced adhesion to copper foil.

The most commonly used phenolic epoxy resin at present is F-51.

4. Ortho-methylphenol formaldehyde epoxy

In an acidic medium, o-cresol undergoes polycondensation with formaldehyde to yield a linear phenolic resin, which is then further condensed with excess epichlorohydrin in the presence of sodium hydroxide. The structural formula is as follows:

Ortho-cresol-type phenolic epoxy resin is essentially identical to phenol-type phenolic epoxy resin, except that it has a methyl group at the ortho position on the benzene ring. It outperforms the latter in terms of water resistance and melt viscosity.

V. Polyether Polyol

Polyether polyols are produced by the ring-opening polymerization of PO/EO using an alcohol (the initiator) containing two or more hydroxyl groups.

A compound with hydroxyl groups at the end, having a molecular weight of hundreds or thousands.

The functionality of polyether polyols depends on the functionality of the initiator.

1. Common types of initiators:

Functionality Initiator Oxirane Molecular weight Use

2

(Diols)

Water, propylene glycol, ethylene glycol, dipropylene glycol, and others

EO

PO

PO/EO

THF/PO

200-4000 Elastomers, coatings, adhesives, synthetic leather, soft and semi-soft foamed plastics, etc.

3

(Triol)

Glycerol, trimethylolpropane, pentaerythritol, triethanolamine, and others

PO

PO/EO

200-6000 Elastomers, waterproofing materials, compounds, semi-rigid foam plastics, and the like

4

(Tetraol)

Pentaerythritol, ethylenediamine, aromatic triamines, etc.

PO

PO/EO

400-800

Soft foam plastic

Semi-rigid foam plastic

Rigid foam plastic

5

(Pentanol)

Xylitol, diethylenetriamine, and others

PO

PO/EO

500-800 Rigid foam plastic

6

(Hexaol)

Sorbitol

Mannitol

PO

PO/EO

Under 1000 Rigid foam plastic

8

(Octaol)

Sucrose

PO

PO/EO

500-15,000

Soft foam material (high negative buoyancy)

Rigid foam plastic

2. Reaction process:

6. Polyester Diol

1. Synthetic raw material 1: Dicarboxylic acid or acid anhydride

The main ones include phthalic anhydride (PA), isophthalic acid (IPA), terephthalic acid (PTA), succinic acid, glutaric acid, adipic acid (AA), sebacic acid, and azelaic acid.

2. Synthetic raw material 2: Diol

Ethylene glycol, 1,2-propanediol, 1,3-propanediol, 1,4-butanediol, 1,2-butanediol, 1,3-butanediol, 2-methyl-1,3-propanediol (MPD), neopentyl glycol (2,2-dimethyl-1,3-propanediol, NPG), 1,5-pentanediol, and 1,6-hexanediol (1,6-HDO).

In a polyester resin formulation, to achieve excellent polyester performance, multiple alcohols and acids must be used in combination to strike a balance among hardness, flexibility, adhesion, impact resistance, and cost.

Monomer name Status Relative molecular mass Melting point (boiling point) (℃) Feature
Ethylene glycol Liquid 62.07 -13.3 (197.2) Universal, flexibility
Diethylene glycol Liquid 106.12 -8.3 (244.5) Hydrophilic, flexible
1,2-Propanediol Liquid 76.09 (188.2) Universal
Diethylene glycol (1,2-propanediol) Liquid 134.17 (232) Hydrolysis-resistant
2-Methyl-1,3-propanediol Liquid 90.8 42-44 (262) Universal
2-Butyl-2-ethyl-1,3-propanediol (BEPD) Solid 160.3 43 Weather resistance, hydrolysis resistance
1,4-Butanediol Liquid 90 20 Universal
1,3-Butanediol Liquid 90.1 -77 (207.5) Solubility
Neopentyl glycol Solid 104.15 124–130 (210) Universality, chemical resistance, weather resistance, hydrolysis resistance
Hexanediol Solid 118 40 Flexible
Hydrogenated Bisphenol A Solid 236 124-126 Heat-resistant, chemical-resistant
Trimethylolpropane Solid 134.12 57-59 Heat-resistant, hydrolysis-resistant
1,4-Cyclohexanediol Liquid 144.21 43 (245) Hard and tough, weather-resistant, hydrolysis-resistant, highly reactive, and yellowing-resistant.
2,2,4-Trimethyl-3-pentanediol (TMPD) Solid 146.22 46-55 (215-235) Low viscosity, weather-resistant, dirt-resistant, flexible
Hydroxyneopentyl hydroxyneopentyl ester (chemical name: 3-hydroxy-2,2-dimethylpropanoic acid (3-hydroxy-2,2-dimethylpropyl) ester, HPHP) Solid 209 49.5–50.5 Hard and tough, weather-resistant, hydrolysis-resistant

 

7. Polycarbonate diol

Polyurethanes prepared using polycarbonate exhibit excellent weather resistance, chemical resistance, hydrolysis resistance, and abrasion resistance.

1. Conventional method: Transesterification

Using dimethyl carbonate or diphenyl carbonate as raw materials, carry out transesterification and condensation reactions with aliphatic diols.

Reaction equation:

Main raw materials:

(1) Carbonate

Dimethyl carbonate, diethyl carbonate, ethylene carbonate, dipropyl carbonate, diphenyl carbonate;

(2) Diol

1,3-Propanediol, neopentyl glycol, 1,4-Butanediol, 3-methyl-1,5-pentanediol, 1,6-Hexanediol, and others;

(3) Catalyst Type

Alkali metal catalysts, organometallic catalysts, organic amine catalysts, and others.

 

Share to:

Related News


Silane Coupling Agents: Chemistry and Applications

Silane coupling agents can serve as elastic bridging agents between matrices, enhancing the adhesion between two materials with different chemical properties and thereby improving the overall performance of the resulting product—including mechanical properties, electrical insulation, resistance to aging, and water repellency. They can also be used as surface modifiers for materials, endowing them with properties such as water resistance, antistatic capability, mold resistance, odor prevention, anti-coagulation, and physiological inertness. Furthermore, they can act as crosslinking agents in non-crosslinked polymer systems, enabling curing under ambient temperature and pressure conditions.


Overview of UV Epoxy Acrylates

The synthesis of epoxy acrylates was first reported as early as the 1950s; however, it was not until the 1970s that they began to be applied in the field of UV curing. Epoxy acrylates are produced by the esterification of commercially available epoxy resins with acrylic acid or methyl acrylate, and they currently represent the largest category of photopolymerizable oligomers consumed within China’s UV-curing industry.


Introduction to Photoinitiators and Their Applications

A photoinitiator, also known as a photosensitizer or photocuring agent, is a class of compounds that can absorb energy at specific wavelengths in the ultraviolet (250–420 nm) or visible light (400–800 nm) range, generating free radicals, cations, and other species that initiate the polymerization, crosslinking, and curing of monomers.