Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Analysis of the Risk of UV Adhesive Performance Degradation (Part 3)
Release time:
2025-08-14 02:38
Among numerous industrial applications, UV adhesives have become an indispensable material in many fields thanks to their rapid curing and excellent bonding strength. However, in environments exposed to prolonged light, UV adhesives face the serious challenge of photo‑induced aging, which leads to a gradual degradation of their mechanical properties and poses potential risks to the performance and service life of related products.
I. The Intrinsic Chemical Mechanisms of Photodegradation
UV adhesives contain a complex network of chemical bonds, which are critical to maintaining the adhesive’s mechanical properties. When exposed to light over extended periods, the energy carried by photons interacts with these internal bonds. In particular, ultraviolet radiation, with its higher energy, can excite electrons within the bonds, driving them into an unstable, high‑energy state. Over time, such unstable bonds are prone to cleavage, leading to alterations in the adhesive’s molecular structure. Bond breakage is not an isolated phenomenon; it triggers a cascade of reactions that progressively degrade the adhesive’s overall chemical architecture, thereby compromising its physical and mechanical performance.
II. Performance Degradation in Solar Cell Encapsulation
Solar‑cell encapsulation is an application with extremely stringent material‑performance requirements, demanding that encapsulant materials provide long‑term, stable protection for the solar cells and resist the effects of the external environment. In conventional UV‑curable adhesives used for solar‑cell encapsulation, prolonged exposure to light leads to pronounced photo‑aging. As irradiation time increases, chemical bonds within the adhesive progressively break, resulting in a significant decline in key mechanical properties such as tensile strength. A reduction in tensile strength means the adhesive becomes more prone to deformation or even fracture under external loads. Consequently, it can no longer effectively secure and protect the solar cells; under conditions of vibration, temperature fluctuations, and other external forces, the cells are susceptible to cracking, delamination, and other forms of damage. Once a cell is damaged, the photovoltaic efficiency of the solar module drops sharply, as compromised cells can no longer efficiently convert light into electricity. Moreover, cell delamination can disrupt internal electrical connections within the module, further compromising the stable operation of the entire solar‑energy system and shortening its service life.
III. Comparative Analysis of Performance Degradation Across Different Types of Adhesives
To gain a deeper understanding of how photo‑aging affects the mechanical properties of UV‑curable adhesives, we can compare the performance changes of conventional UV adhesives with those of adhesives modified using aliphatic polyurethane under identical illumination conditions. Experimental results show that, after exposure to the same duration of light, conventional UV adhesives exhibit a more pronounced reduction in tensile strength. This is because their chemical structure is relatively simple and offers weaker resistance to photo‑aging, making their chemical bonds more susceptible to cleavage under irradiation. In contrast, aliphatic polyurethane‑modified adhesives demonstrate superior resistance to photo‑aging. The molecular architecture of aliphatic polyurethanes incorporates specific functional groups that can absorb a portion of the incident light energy, thereby diminishing the direct impact of photons on chemical bonds and reducing the likelihood of bond scission. Consequently, after the same period of light exposure, these modified adhesives display a significantly smaller decline in tensile strength compared to conventional UV adhesives, providing more durable and reliable encapsulation for solar cells and ensuring their stable operation over long‑term use.
IV. Comprehensive Risks Associated with Photodegradation
The mechanical property degradation of UV‑curable adhesives caused by photo‑aging not only compromises the power‑generation efficiency and service life of solar cells but also exposes relevant companies to a host of interconnected risks. From a product‑quality perspective, adhesives with deteriorated mechanical properties fail to meet design specifications, leading to inconsistent product quality, a higher incidence of defective and scrap units, and increased production costs. From a market‑reputation standpoint, such quality issues tarnish a company’s image and credibility, eroding consumer trust in its products and ultimately impacting sales and market share.
V. Conclusion
The photo‑induced aging of UV‑curable adhesives under prolonged exposure to light leads to the cleavage of chemical bonds, resulting in a decline in mechanical properties and manifesting as pronounced performance degradation in applications such as solar‑cell encapsulation. The resistance to photo‑induced aging varies among different adhesive formulations, and the cumulative risks associated with this phenomenon should not be overlooked. During the research, development, and application of relevant products, it is essential to fully recognize the severity of this issue and conduct rigorous evaluation and continuous monitoring of the performance of UV‑curable adhesives.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Bossin Related Product Recommendations – UV Adhesives | ||
| Electronic structural adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-186 | Modified epoxy acrylate | Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| B-2111D | Aliphatic polyurethane acrylate | Excellent adhesion, high elongation, and resistance to thermal shock. |
| B-2116 | Aliphatic polyurethane acrylate | Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength. |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-2622 | Polyurethane acrylate | Small shrinkage, excellent adhesion, good elongation, and excellent transparency. |
| B-295A | Aliphatic polyurethane acrylate | Fast curing, high hardness, resistant to boiling water and alkali. |
| Glass bonding | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-186 | Modified epoxy acrylate | Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| B-2058P-2 | Aliphatic polyurethane acrylate | Excellent adhesion, resistant to strong acids and strong alkalis, and low curing shrinkage. |
| B-2111D | Aliphatic polyurethane acrylate | Excellent adhesion, high elongation, and resistance to thermal shock. |
| B-211A | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, and water resistance. |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-295A | Aliphatic polyurethane acrylate | Fast curing, high hardness, resistant to boiling water and alkali. |
| Plastic bonding | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-2111D | Aliphatic polyurethane acrylate | Excellent adhesion, high elongation, and resistance to thermal shock. |
| B-2116 | Aliphatic polyurethane acrylate | Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength. |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-2621 | Aliphatic polyurethane acrylate | Excellent adhesion, resistant to strong acids and strong alkalis, and low curing shrinkage. |
| B-2622 | Polyurethane acrylate | Small shrinkage, excellent adhesion, good elongation, and excellent transparency. |
| Glass bonding to metal | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-186 | Modified epoxy acrylate | Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| B-2058P-2 | Aliphatic polyurethane acrylate | Excellent adhesion, resistant to strong acids and strong alkalis, and low curing shrinkage. |
| B-211A | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, and water resistance. |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-295A | Aliphatic polyurethane acrylate | Fast curing, high hardness, resistant to boiling water and alkali. |
| Solder Joint Protective Adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-151DT | Modified epoxy acrylate | Yellowing resistance, excellent flexibility, good plating performance, and strong adhesion. |
| B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion |
| B-186 | Modified epoxy acrylate | Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-221 | Aliphatic polyurethane acrylate | Fast curing, resistant to boiling water |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| Liquid optical adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-2111D | Aliphatic polyurethane acrylate | Excellent adhesion, high elongation, and resistance to thermal shock. |
| B-2116 | Aliphatic polyurethane acrylate | Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength. |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-2621 | Aliphatic polyurethane acrylate | Excellent adhesion, resistant to strong acids and strong alkalis, and low curing shrinkage. |
| Crystal epoxy resin | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-276H | Aliphatic polyurethane acrylate | High hardness, fast curing, excellent toughness, and low yellowing. |
| B-286 | Aliphatic polyurethane acrylate | Low heat generation, excellent toughness, wear resistance, and impact resistance. |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| B-296M | Polyurethane acrylate | Fast curing, resistant to polar solvents, yellowing-resistant, and impact-resistant. |
| Three-proof adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-02 | Phosphate ester acrylate | Enhance adhesion to substrates such as metal, glass, and plastic. |
| B-404 | Aliphatic polyurethane acrylate | Excellent flexibility and moisture stability |
| B-404C | Aliphatic polyurethane acrylate | Excellent flexibility and moisture stability |
| B-405 | Aliphatic polyurethane acrylate | Excellent adhesion and superior moisture stability. |
| B-405H | Aliphatic polyurethane acrylate | Excellent adhesion and superior moisture stability. |
| B-549 | Polyester acrylate | Low viscosity, adhesion, and weather resistance |
| LED bead protective adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA. |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
| B-166A | Modified epoxy acrylate | Good flexibility and strong adhesion |
| B-166A-85 | Modified epoxy acrylate | Good flexibility, excellent adhesion, contains 15% HEMA. |
| B-166A-85P | Modified epoxy acrylate | Good flexibility, excellent adhesion, contains 15% HEMA. |
| B-186 | Modified epoxy acrylate | Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| High-temperature resistant | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-186 | Modified epoxy acrylate | Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant |
| B-191A | Phenolic epoxy acrylate | Fast curing and excellent heat resistance |
| B-548 | Polyester acrylate | Withstands high temperatures of 250–280°C. |
| B-919B | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, and superior chemical and wear resistance. |
| Anti-spy adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-251 | Aromatic polyurethane acrylate | Fast curing, excellent flexibility, and good wetting of black ink pigments. |
| B-254 | Aliphatic polyurethane acrylate | Flexibility, pigment wettability, and double 85 resistance |
| Odor-Neutralizing UV Gel | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-2621 | Aliphatic polyurethane acrylate | Excellent adhesion, resistant to strong acids and strong alkalis, and low curing shrinkage. |
| Peelable adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-368 | Aliphatic polyurethane acrylate | Good toughness, excellent leveling, excellent bend resistance, and excellent heat resistance. |
| Water and oxygen barrier | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-291 | Aliphatic polyurethane acrylate | Low shrinkage, moderate softness and toughness, excellent chemical resistance, and superior water and oxygen barrier properties. |
| Monomer Recommendation | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| BM1105 (OPPEA) | 邻-Phenylphenoxyethyl acrylate | Low shrinkage, excellent adhesion, low volatility, high refractive index |
| BM1210 (PHEA) | 2-Phenoxyethyl acrylate | Low shrinkage, heat resistance, excellent adhesion, high refractive index |
| BM1211 (HPMA) | Hydroxypropyl methacrylate | HEMA-free, high strength, low irritation, and high adhesion |
| BM2101M (10EO-BPADMA) | Bisphenol A dimethacrylate ethoxylate | Low irritation, flexibility, excellent strength, and heat resistance |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
Share to:
Related News
Analysis of the Risk of UV Adhesive Performance Degradation (Part 2)
In industries such as healthcare and electronics, where material performance is subject to stringent requirements, UV adhesives have found widespread use thanks to their rapid curing speed and excellent bonding strength. However, UV adhesives containing plasticizers face a serious issue—plasticizer migration—under high-temperature conditions, which poses significant potential risks to product performance and quality.
Analysis of the Risk of UV Adhesive Performance Degradation (Part 1)
Among numerous industrial materials, UV adhesives have found widespread application in fields such as electronics, optics, and advertising, thanks to their rapid curing and high bonding strength. However, in outdoor applications exposed to ultraviolet radiation over extended periods, UV adhesives face significant performance degradation, with yellowing being particularly pronounced, thereby posing substantial risks to the quality and service life of related products.
The Impact of Humid Environments on UV Optical Adhesives (Part 5)
In the medical device industry, the performance and safety of every component directly impact patient health and well‑being, leaving no room for compromise. UV‑curable optical adhesives, with their rapid curing and substantial bond strength, have found widespread use in medical device manufacturing—particularly in the assembly of precision instruments such as endoscopes. However, humid environments pose significant challenges to these adhesives, severely compromising both the performance and biocompatibility of medical devices.