Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Selection of UV Ink Formulations Based on Substrate Properties
Release time:
2025-07-11 17:19
In UV ink printing technology, the compatibility between the ink and the substrate is a critical factor determining the final print quality. Because different substrates exhibit distinct physical and chemical properties, their requirements for UV ink performance also vary. This article examines key considerations for selecting appropriate UV inks, focusing on major substrate types such as metal, glass, ceramic, plastic, paper, and wood panels.
I. Applications of Metallic Materials and Ink Selection
Due to their hardness, smooth surface, and excellent electrical conductivity, metal materials require particular attention in UV ink applications, especially with regard to adhesion and abrasion resistance. Metal surfaces are typically dense and difficult to directly bond with inks; therefore, the selected ink must exhibit outstanding adhesion to prevent delamination. Furthermore, to accommodate the unique properties of metals, the curing speed and depth of the ink should be carefully optimized to ensure complete cure within a short time, thereby enhancing the stability of the print quality.
II. Printing Requirements for Glass Materials
Glass is renowned for its transparency and high-temperature resistance, which means that when selecting UV inks, priority is given to both transparency and weatherability. High-transparency ink formulations help preserve the glass’s original visual appearance, while excellent weather resistance effectively prevents printed designs from fading or degrading due to prolonged exposure to outdoor conditions. Furthermore, given the relatively hard surface of glass, the curing efficiency of the ink and the hardness of the cured film are also critical factors, ensuring that the ink layer adheres firmly to the glass substrate.
III. Printing Adaptation for Ceramic Products
Ceramic materials exhibit excellent high-temperature resistance and corrosion resistance, making them suitable for a wide range of demanding environments. For such materials, UV inks must demonstrate strong adhesion and superior chemical stability. In practical applications, acid–alkali‑resistant additives can be incorporated to enhance the ink’s corrosion‑resistance performance. At the same time, the pigments’ thermal stability and lightfastness must meet stringent requirements to ensure vibrant, long-lasting print colors. Furthermore, the ink’s curing speed and color‑retention properties are also critical performance indicators.
IV. Printing Characteristics of Plastic Materials
As a lightweight and flexible material, plastic is widely used in packaging, electronics, and numerous other industries. However, its low surface energy can lead to poor ink adhesion. Therefore, when selecting UV inks, it is advisable to prioritize formulations that exhibit excellent compatibility with plastic substrates, thereby preventing adhesion loss due to chemical reactions. Additionally, to meet the flexibility requirements of plastic materials, appropriate amounts of plasticizers or other flexibilizing additives can be incorporated into the ink. Furthermore, the addition of wear‑resistant fillers or hardeners can further enhance the ink’s abrasion resistance.
V. Printing Considerations for Paper and Woodboard Materials
Paper and woodboard, as traditional printing substrates, exhibit excellent ink absorption and printability. In the context of UV ink applications, the key considerations are drying speed and color performance. Fast-drying ink formulations help boost production efficiency, while vividly colored inks enhance the visual appeal of printed materials. Moreover, depending on the desired level of gloss for paper or woodboard, appropriate gloss or matte additives can be incorporated into the ink to achieve the desired surface finish.
VI. Summary
UV ink printing, with its efficiency and environmental benefits, has been widely adopted across numerous industries. However, achieving high‑quality print results hinges on selecting the appropriate ink formulation tailored to the specific characteristics of each substrate. Whether it’s metal, glass, ceramic, plastic, paper, or wood panels, every material has unique requirements; only by precisely matching ink performance can the advantages of UV printing be fully realized, meeting a wide range of application needs.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Bossin Related Product Recommendations – UV Ink | ||
| Offset printing ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-153 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-530 | Polyester acrylate | Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting. |
| B-536 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
| B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM4241 (DiTMPTA-80) | Bis(2,3-hydroxymethylpropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Flexographic ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
| B-21 | Active amine photosensitizing promoter | Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-21C | Active amine photosensitizing promoter | Low color number, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-270 | Aliphatic polyurethane acrylate | Low viscosity, excellent flexibility, good wettability, and excellent leveling. |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-509B | Polyester acrylate | Good adhesion, good flexibility, and excellent pigment wetting. |
| B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
| B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
| B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
| B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM4241 (DiTMPTA-80) | Bis(2,3-hydroxymethylpropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Intaglio ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
| B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-509B | Polyester acrylate | Good adhesion, good flexibility, and excellent pigment wetting. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| Screen printing ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-153 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-21 | Active amine photosensitizing promoter | Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-216 | Aliphatic polyurethane acrylate | Fast curing, high fullness, and excellent toughness. |
| B-27 | Active amine photosensitizing promoter | Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| B-371 | Aliphatic polyurethane acrylate | Good surface drying, excellent flexibility, and excellent gloss retention. |
| B-509B | Polyester acrylate | Good adhesion, good flexibility, and excellent pigment wetting. |
| B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
| B-531 | Polyester acrylate | Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
| B-535 | Polyester acrylate | Excellent adhesion, fast curing, good flexibility, and yellowing resistance. |
| B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
| B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Solder resist ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-05 | Phosphate ester acrylate | Enhance adhesion to substrates such as metal, glass, and plastic. |
| B-191A | Phenolic epoxy acrylate | Fast curing and excellent heat resistance |
| B-196S | Modified o‑methylphenol‑formaldehyde epoxy acrylate | Fast curing, excellent heat resistance, and superior development performance. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| UV inkjet | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-21 | Active amine photosensitizing promoter | Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-27 | Active amine photosensitizing promoter | Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor |
| B-270 | Aliphatic polyurethane acrylate | Low viscosity, excellent flexibility, good wettability, and excellent leveling. |
| B-271 | Aliphatic polyurethane acrylate | Flexibility, low shrinkage, weather resistance, pigment wettability |
| B-39 | Aliphatic polyurethane acrylate | Low viscosity, good flexibility, and low volatility. |
| B-570 | Polyester acrylate | Low viscosity, benzene-free, low odor, suitable for LED UV |
| B-572 | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-574 | Polyester acrylate | Benzene-free, low-odor, and VOC levels meet cigarette-packaging standards. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-609 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch resistance, and chemical resistance. |
| B-619W | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, wear resistance, and chemical resistance. |
| BM1211 (HPMA) | Hydroxypropyl methacrylate | HEMA-free, high strength, low irritation, and high adhesion |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| Glass protection | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-503 | Polyester acrylate | Fast curing, excellent flexibility, low viscosity, and minimal irritation. |
| B-52 | Polyester acrylate | Fast curing, excellent flexibility, low volatility, and minimal irritation. |
| B-583 | Polyester acrylate | Fast curing, excellent flexibility, low viscosity, and etching resistance. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| Wrinkled Snowflake | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-100 | Bisphenol A epoxy acrylate | High hardness, high gloss, excellent chemical resistance, and rich body. |
| B-371 | Aliphatic polyurethane acrylate | Good surface drying, excellent flexibility, and excellent gloss retention. |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-574 | Polyester acrylate | Benzene-free, low-odor, and VOC levels meet cigarette-packaging standards. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM4241 (DiTMPTA-80) | Bis(2,3-hydroxymethylpropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Tinplate ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-374 | Aliphatic polyurethane acrylate | Good flexibility, excellent leveling, resistant to abrasion and chemicals, and yellowing‑resistant. |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-509B | Polyester acrylate | Good adhesion, good flexibility, and excellent pigment wetting. |
| B-531 | Polyester acrylate | Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
Share to:
Related News
In the modern printing industry, UV inks have assumed a pivotal role thanks to their efficiency and environmental friendliness. Their outstanding performance stems from a carefully formulated blend of multiple components that work in concert to impart unique physical and chemical properties. This article will delve into the key constituents of UV inks and their impact on ink performance.
Quality Control Strategies for UV Vacuum Plating Processes
The UV vacuum plating process combines vacuum coating with ultraviolet curing technology, effectively enhancing the wear resistance, corrosion resistance, and metallic appearance of product surfaces, and is widely used across multiple industrial sectors. To ensure process stability and high quality, meticulous quality control must be implemented at every stage. The following outlines the key steps and corresponding implementation strategies.
Analysis of the UV Vacuum Plating Process Flow
The UV vacuum plating process, an advanced surface‑treatment technique that combines vacuum coating with ultraviolet curing, is increasingly demonstrating its unique appeal and broad application potential across numerous industrial sectors. This article provides a detailed analysis of the UV vacuum plating workflow, covering every critical step—from substrate pretreatment to the final finished product.