Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Components of UV ink
Release time:
2025-07-11 07:17
In the modern printing industry, UV inks have assumed a pivotal role thanks to their efficiency and environmental friendliness. Their outstanding performance stems from a carefully formulated blend of multiple components that work in concert to impart unique physical and chemical properties. This article will delve into the key constituents of UV inks and examine how they influence ink performance.
I. Prepolymer: The Cornerstone of Ink
As the core component of UV inks, prepolymers form the foundation of the cured ink film. They are typically linear polymeric compounds containing unsaturated double bonds that undergo crosslinking upon exposure to ultraviolet light, yielding a robust and durable ink film. The selection of prepolymers directly influences the ink’s printability and final performance; their molecular structure and crosslinking density determine the hardness, flexibility, and chemical resistance of the resulting ink film.
II. Reactive Diluents: Dual Assurance of Curing and Flowability
Active diluents play a dual role in UV inks: they serve as both participants in crosslinking during curing and key solvents for thinning. They contain reactive functional groups, such as double bonds, that can react with prepolymers to form crosslinks; these groups undergo polymerization upon exposure to ultraviolet light, thereby promoting ink curing. At the same time, their excellent solvency and diluting properties impart superior flow characteristics to the ink, ensuring smooth application and uniformity during printing. Monofunctional and polyfunctional monomers are common types of active diluents, and they are selected to tailor the ink’s cure rate and physical properties according to specific requirements.
III. Photosensitizer: A Catalyst That Accelerates Curing
Photoinitiators are a key factor in enhancing the curing efficiency of UV inks. They absorb ultraviolet light at longer wavelengths than prepolymers and reactive diluents, generating free radicals through decomposition or photoexcitation; these free radicals then initiate the polymerization of prepolymers and reactive diluents, significantly accelerating the ink’s curing process. The selection and dosage of photoinitiators have a decisive impact on both the curing speed and the final performance of the ink, making them an essential component in optimizing ink formulations.
IV. Pigments and Fillers: The Agents of Color and Performance
In UV inks, pigments and fillers primarily serve to provide color and enhance bulk. The type and dosage of pigments directly influence the ink’s color appearance, gloss, and transparency. However, pigment addition can also affect the absorption, reflection, or scattering of UV light, potentially reducing the photoinitiator’s photo‑initiation efficiency and slowing the ink’s curing rate. Therefore, when selecting pigments, it is essential to consider their impact on UV‑light absorption in order to strike a balance between color performance and curing kinetics. Fillers, on the other hand, are mainly used to adjust the ink’s viscosity and flow properties, thereby improving printability.
V. Additives: Details Determine Success or Failure
Although additives are used in small quantities in UV inks, their role should not be underestimated. By enhancing printability, improving adhesion and abrasion resistance of the ink film, and preventing degradation, they ensure both the stability of the ink and optimal printing performance. For example, dispersants promote uniform dispersion of pigments within the ink, boosting color brilliance and stability; defoamers eliminate air bubbles, thereby preventing printing defects; leveling agents improve flow and leveling, resulting in a smoother ink film; and antioxidants help prevent oxidative deterioration during storage.
VI. Summary
The exceptional performance of UV inks stems from the meticulous formulation and synergistic interactions among their various components. From prepolymers to reactive diluents, from photoinitiators to pigments and fillers, and through a range of additives, each constituent plays an indispensable role. By continuously researching and optimizing these ingredients, we can further enhance the performance of UV inks, meet increasingly diverse printing requirements, and drive the ongoing advancement of the printing industry.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Bossin Related Product Recommendations – UV Ink | ||
| Offset printing ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-153 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-530 | Polyester acrylate | Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting. |
| B-536 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
| B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM4241 (DiTMPTA-80) | Bis(2,3-dihydroxypropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Flexographic ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA. |
| B-21 | Active amine photosensitizing promoter | Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-21C | Active amine photosensitizing promoter | Low color number, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-270 | Aliphatic polyurethane acrylate | Low viscosity, excellent flexibility, good wettability, and excellent leveling. |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-509B | Polyester acrylate | Good adhesion, excellent flexibility, and superior pigment wetting. |
| B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
| B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
| B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
| B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM4241 (DiTMPTA-80) | Bis(2,3-dihydroxypropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Intaglio ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA. |
| B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-509B | Polyester acrylate | Good adhesion, excellent flexibility, and superior pigment wetting. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| Screen printing ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA. |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-153 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
| B-21 | Active amine photosensitizing promoter | Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-216 | Aliphatic polyurethane acrylate | Fast curing, high build, and excellent toughness. |
| B-27 | Active amine photosensitizing promoter | Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| B-371 | Aliphatic polyurethane acrylate | Good surface drying, excellent flexibility, and excellent gloss retention. |
| B-509B | Polyester acrylate | Good adhesion, excellent flexibility, and superior pigment wetting. |
| B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
| B-531 | Polyester acrylate | Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
| B-535 | Polyester acrylate | Excellent adhesion, fast curing, good flexibility, and yellowing resistance. |
| B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
| B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Solder resist ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-05 | Phosphate ester acrylate | Enhance adhesion to substrates such as metal, glass, and plastic. |
| B-191A | Phenolic epoxy acrylate | Fast curing and excellent heat resistance |
| B-196S | Modified o‑methylphenol‑formaldehyde epoxy acrylate | Fast curing, excellent heat resistance, and superior development performance. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| UV inkjet | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-21 | Active amine photosensitizing promoter | Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate. |
| B-27 | Active amine photosensitizing promoter | Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor |
| B-270 | Aliphatic polyurethane acrylate | Low viscosity, excellent flexibility, good wettability, and excellent leveling. |
| B-271 | Aliphatic polyurethane acrylate | Flexibility, low shrinkage, weather resistance, pigment wettability |
| B-39 | Aliphatic polyurethane acrylate | Low viscosity, good flexibility, and low volatility. |
| B-570 | Polyester acrylate | Low viscosity, benzene-free, low odor, suitable for LED UV. |
| B-572 | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-574 | Polyester acrylate | Benzene-free, low-odor, and VOC levels meet cigarette-packaging standards. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-609 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch resistance, and chemical resistance. |
| B-619W | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, wear resistance, and chemical resistance. |
| BM1211 (HPMA) | Hydroxypropyl methacrylate | HEMA-free, high strength, low irritation, and excellent adhesion |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| Glass protection | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-503 | Polyester acrylate | Fast curing, excellent flexibility, low viscosity, and minimal irritation. |
| B-52 | Polyester acrylate | Fast curing, excellent flexibility, low volatility, and minimal irritation. |
| B-583 | Polyester acrylate | Fast curing, excellent flexibility, low viscosity, and etching resistance. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| Wrinkled Snowflake | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-100 | Bisphenol A epoxy acrylate | High hardness, high gloss, excellent chemical resistance, and rich body. |
| B-371 | Aliphatic polyurethane acrylate | Good surface drying, excellent flexibility, and excellent gloss retention. |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-574 | Polyester acrylate | Benzene-free, low-odor, and VOC levels meet cigarette-packaging standards. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM3384 (3PO-GPTA) | Propylene glycol triacrylate | Good flexibility, low irritation, and excellent pigment wetting. |
| BM4241 (DiTMPTA-80) | Bis(2,3-dihydroxypropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| Tinplate ink | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-374 | Aliphatic polyurethane acrylate | Excellent flexibility, good leveling, resistant to abrasion and chemicals, and resistant to yellowing. |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-509B | Polyester acrylate | Good adhesion, excellent flexibility, and superior pigment wetting. |
| B-531 | Polyester acrylate | Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
| BM2223 (TPGDA) | Dipropylene glycol diacrylate | Good flexibility and low volatility |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
Share to:
Related News
Quality Control Strategies for UV Vacuum Plating Processes
The UV vacuum plating process combines vacuum coating with ultraviolet curing technology, effectively enhancing the wear resistance, corrosion resistance, and metallic appearance of product surfaces, and is widely used across multiple industrial sectors. To ensure process stability and high quality, meticulous quality control must be implemented at every stage. The following outlines the key steps and corresponding implementation strategies.
Analysis of the UV Vacuum Plating Process Flow
The UV vacuum plating process, an advanced surface‑treatment technique that combines vacuum coating with ultraviolet curing, is increasingly demonstrating its unique appeal and broad application potential across numerous industrial sectors. This article provides a detailed analysis of the UV vacuum plating workflow, covering every critical step—from substrate pretreatment to the final finished product.
Introduction to UV Vacuum Plating Technology
In modern manufacturing, surface‑treatment technologies play a crucial role in enhancing product performance, extending service life, and meeting environmental regulations. The UV vacuum plating process, an advanced surface‑treatment method that integrates vacuum coating with ultraviolet curing, is increasingly becoming the preferred solution across numerous industries.