Solutions for Common Issues with UV Inks (Part 7)


Yellowing and deformation of the substrate surface are common issues in UV ink printing. These problems not only affect the aesthetic appeal and durability of printed materials but can also harm a company’s brand image and customer satisfaction. To address these challenges, we need to take a comprehensive approach—from selecting appropriate substrates and controlling curing conditions to using additives and optimizing the curing process—ensuring the quality and stability of printed products.

1. Yellowing on the surface of the substrate

1. Choose a substrate that is not sensitive to ultraviolet light.

When selecting a substrate, it’s essential to thoroughly understand its chemical composition and UV resistance, as well as its long-term stability and ability to withstand ultraviolet radiation. Certain materials, such as polycarbonate, are sensitive to UV light and prone to photooxidation, which can cause the surface to yellow over time. Therefore, it is crucial to choose substrates that have undergone special treatments or exhibit superior UV resistance.

2. Control curing conditions

The intensity of ultraviolet (UV) light and the duration of irradiation during the curing process can significantly affect yellowing on the surface of the substrate. Therefore, it is essential to properly control the UV intensity and irradiation time to prevent excessive UV exposure and prolonged irradiation periods from causing yellowing on the substrate surface. In practical operations, this goal can be achieved by adjusting the parameters of the UV curing equipment:

(1) Precisely adjust the parameters of the UV curing equipment, including ultraviolet intensity, irradiation time, and wavelength, to ensure that the ink is fully cured without causing excessive damage to the substrate.

(2) Perform regular equipment maintenance and check the performance of UV lamps to ensure they remain within their specified service life. Avoid excessive ultraviolet radiation and prolonged exposure times, which could cause yellowing of the substrate surface.

(3) Use a temperature control system to ensure stable temperature during the curing process and prevent material aging caused by high temperatures.

3. Add an antioxidant

Adding an appropriate amount of antioxidant to ink can enhance the oxidation resistance of the substrate, reduce the occurrence of yellowing, and also allow you to directly choose ink products that already contain highly effective antioxidants. Antioxidants work by scavenging free radicals, thereby preventing materials from yellowing due to oxidation. When selecting inks, you can pay attention to whether they contain antioxidant ingredients, or you can add an appropriate amount of antioxidant yourself as needed. It’s important to note that the dosage of antioxidants should be moderate—too much or too little may both affect the ink’s performance and printing results. Therefore, when adding antioxidants, it’s essential to conduct thorough testing and evaluation to determine the optimal dosage.

II. Deformation of the Printing Material

1. Choose a substrate with a lower coefficient of thermal expansion.

Different substrates have different coefficients of thermal expansion. When selecting a substrate, it’s crucial to prioritize its coefficient of thermal expansion, gain a thorough understanding of this property, and familiarize yourself with how various materials change in size at different temperatures. Choose materials with good thermal stability. Materials with lower coefficients of thermal expansion exhibit smaller dimensional changes when subjected to temperature fluctuations, which helps minimize deformation during the curing process.

2. Optimize the curing process

Thermal expansion during the curing process is one of the primary causes of substrate deformation. Therefore, during curing, it is essential to carefully control the curing temperature and duration to prevent excessive temperatures and prolonged curing times from causing substrate deformation. In practical operations, this goal can be achieved by adjusting the parameters of the UV curing equipment. For example, reducing the curing temperature can minimize the impact of thermal expansion; at the same time, shortening the curing time can help avoid substrate deformation caused by excessively long curing periods. In addition, the curing equipment should be calibrated regularly to ensure the accuracy of both curing temperature and duration. Furthermore, a temperature control system can be employed to maintain stable temperatures throughout the curing process, thereby reducing the influence of temperature fluctuations on the substrate’s dimensions.

3. Employ a pre-curing process

Before formal curing, the substrate undergoes a pre-curing treatment to partially set its shape and reduce deformation during the formal curing process. Pre-curing can be achieved by lowering the curing temperature or shortening the curing time.

In practical operation, it is essential to first evaluate the impact of the pre-curing process on the substrate’s performance, ensuring that no other issues are introduced—for example, reduced ink adhesion or increased surface hardness of the substrate. Appropriate pre-curing process parameters can be selected based on the substrate’s material and characteristics. It should be noted that the substrate, after pre-curing, should be subjected to formal curing as soon as possible to prevent shape changes caused by prolonged storage.

III. Summary

In summary, by selecting substrates that are insensitive to ultraviolet light, precisely controlling curing conditions, adding antioxidants, optimizing the curing process, and adopting a pre-curing process, we can effectively address the issues of yellowing and deformation on substrate surfaces. These approaches not only enhance the quality and durability of printed materials but also strengthen the company’s brand image and increase customer satisfaction.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


Solutions for Common Issues with UV Inks (Part 6)

Layering and emulsification in UV inks are critical factors that affect print quality. They not only compromise the overall aesthetic appeal of printed materials but can also lead to machine downtime and repairs, thereby increasing production costs. To overcome these challenges, we need to gain a deeper understanding of the root causes of layering and emulsification and implement effective measures for prevention and resolution.


Solutions for Common Issues with UV Inks (Part 5)

In the UV ink printing process, ink drooling and ink streaking are common quality issues that not only affect the aesthetic appeal and legibility of printed materials but can also lead to material waste and increased production costs. To address these undesirable phenomena, we need to take a multi-faceted approach, focusing on controlling ink fluidity, optimizing curing performance, maintaining equipment, and adjusting ink compatibility, thereby ensuring the stability and efficiency of the printing process.


Solutions for Common Issues with UV Inks (Part 4)

As the foundation of printed materials, the quality of the substrate directly affects the final outcome of the print. Issues such as yellowing, deformation, and poor adhesion on the substrate’s surface not only impair the visual appeal and durability of the print but can also cause difficulties in subsequent processing and use. Therefore, addressing substrate-related problems is crucial for enhancing print quality.