Solutions for Common Issues with UV Inks (Part 4)


As the foundation of printed materials, the quality of the substrate directly affects the final outcome of the print. Issues such as yellowing, deformation, and poor adhesion on the substrate surface not only impair the visual appeal and durability of the print but can also cause difficulties in subsequent processing and use. Therefore, addressing substrate-related problems is crucial for enhancing print quality. Below are some solutions to the adverse effects caused by substrate issues:

1. Yellowing on the surface of the substrate

Yellowing on the surface of the substrate can affect the color and visual appearance of printed materials. To address this issue, the following solutions can be adopted:

1. Select substrates that are insensitive to ultraviolet light: Certain substrates (such as polycarbonate) are sensitive to ultraviolet light and prone to photooxidation, which can cause yellowing of the surface. When selecting a substrate, it’s important to understand its sensitivity to ultraviolet light and choose a substrate that is either insensitive to UV light or has low sensitivity.

2. Control the curing conditions: During the curing process, the intensity of ultraviolet (UV) light and the irradiation time can both have a certain impact on yellowing of the substrate surface. Therefore, it is important to properly control the UV intensity and irradiation time, avoiding excessively strong UV exposure and prolonged irradiation periods that could lead to yellowing of the substrate surface. At the same time, be sure to regularly replace aged UV lamps to ensure optimal curing performance.

3. Add antioxidants: Adding an appropriate amount of antioxidant to the ink can enhance the substrate’s resistance to oxidation and reduce the occurrence of yellowing. When selecting inks, you can check whether they contain antioxidant ingredients, or add an appropriate amount of antioxidant yourself as needed.

II. Deformation of the Printing Material

Deformation of the substrate can affect the size and shape of the printed material. To address this issue, the following solutions can be adopted:

1. Select substrates with lower coefficients of thermal expansion: Different substrates have different coefficients of thermal expansion. Choosing a substrate with a lower coefficient of thermal expansion can help minimize deformation during the curing process. Therefore, when selecting a substrate, you can pay attention to its coefficient of thermal expansion and choose a substrate that is well-suited for your application.

2. Optimize the curing process: Thermal expansion during curing is one of the primary causes of substrate deformation. Therefore, during the curing process, it is essential to properly control the curing temperature and duration, avoiding excessively high temperatures and prolonged curing times that could lead to substrate deformation. At the same time, be sure to regularly calibrate the curing equipment to ensure the accuracy of both curing temperature and duration.

3. Employ a pre-curing process: Before the formal curing stage, subject the substrate to a pre-curing treatment to partially set its shape, thereby reducing deformation during the formal curing process. Therefore, you can try adopting a pre-curing process to enhance the stability of the substrate.

3. Poor adhesion

Poor adhesion can cause printed materials to easily peel or crack when subjected to external forces. To address this issue, the following solutions can be adopted:

1. Select the appropriate ink: If the ink is incompatible with the substrate in terms of polarity, flexibility, and surface treatment level, it may result in poor adhesion. Therefore, you should choose an ink that matches the substrate’s material and characteristics in terms of polarity, flexibility, and surface treatment level. Additionally, pay attention to the storage and handling conditions of the ink to prevent deterioration that could compromise its adhesion performance.

2. Optimize curing equipment: The linear power, penetration capability, and overall energy of UV lamps significantly influence the curing effect and adhesion of inks. It is essential to ensure that the linear power, penetration capability, and overall energy of UV lamps meet the requirements for ink curing. Replace aged or underpowered lamps promptly to maintain stable and reliable curing performance, thereby enhancing the degree of ink curing and its adhesion.

3. Surface Treatment of the Printing Substrate: The cleanliness and roughness of the substrate surface can significantly affect the adhesion of the ink. Before printing, the substrate should undergo surface treatment—including sanding, cleaning, and applying a primer—to remove impurities such as oil stains and dust and to appropriately increase the substrate’s surface roughness, thereby enhancing the adhesion between the ink and the substrate. Pay attention to selecting suitable cleaning agents and treatment methods to avoid damaging the substrate or compromising the printing results.

IV. Summary

To address issues such as yellowing, deformation, and poor adhesion on the substrate surface, we can effectively resolve these problems by adopting the following measures: selecting substrates that are insensitive to ultraviolet light, controlling curing conditions, adding antioxidants, choosing substrates with a lower coefficient of thermal expansion, optimizing the curing process, implementing a pre-curing process, selecting appropriate inks, fine-tuning curing equipment, and performing surface treatments on the substrate.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


Solutions for Common Issues with UV Inks (Part 3)

During the printing process, printing defects are unavoidable issues that not only affect the aesthetic appeal and quality of printed materials but can also reduce production efficiency and increase costs. Problems such as ink smudging, lack of fine detail in printed patterns, and the appearance of bubbles or dents on the surface of printed images are all common challenges encountered in printing.


Solutions for Common Issues with UV Inks (Part 2)

UV inks have gained a significant foothold in the printing industry thanks to their high efficiency and environmentally friendly characteristics. However, in practical applications, the instability of ink performance often poses challenges to print quality. This article aims to delve into the root causes of UV ink performance issues and propose a series of effective solutions.


Solutions for Common Issues with UV Inks (Part 1)

As an important material in the modern printing industry, UV ink has gained widespread adoption due to its advantages such as high efficiency, environmental friendliness, and vivid colors. However, in practical applications, the curing issue of UV ink often becomes a critical factor affecting print quality. This article will delve into the causes of UV ink curing problems and explore corresponding solutions.