Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Common Adverse Phenomena When Using UV Inks (Part 2)
Release time:
2025-02-22 16:51
As an essential component of modern printing technology, UV inks—thanks to their efficient curing process and outstanding print quality—are widely used across various printing applications. However, in practical operations, UV inks can encounter a range of undesirable phenomena, such as printing defects and substrate-related issues. These problems not only affect the quality of printed materials but may also negatively impact production efficiency.
I. Printing Malfunction
1. Plate Smearing: The edges of the printed pattern appear blurred, fine details are lost, and the overall visual effect is poor. A large amount of ink may remain on the screen or squeegee, reducing printing efficiency. During continuous printing, plate smearing may gradually worsen. The specific causes of this phenomenon are as follows:
High ink viscosity: Inks with higher viscosity tend to clog the screen mesh or doctor blade during the printing process. Products such as raised-texture varnishes, iridescent finishes, foaming coatings, and matte finishes generally have higher viscosities and are prone to plate smearing.
Improper printing processes—such as insufficient screen tension, too-small mesh gap, a soft squeegee, uneven or excessive ink return, and inadequate pressure—can all lead to plate smearing.
2. The printed pattern lacks fine detail: The edges of the printed pattern are blurry, and fine details cannot be clearly rendered. Overall, the pattern appears less refined and lacks a sense of depth and dimensionality. When viewed under a magnifying glass, one can observe jagged or irregular shapes along the pattern’s edges. The specific reasons for this phenomenon are as follows:
Insufficient printing pressure: Insufficient printing pressure may result in unclear patterns and incomplete rendering of fine details.
Insufficient blade hardness: Insufficient blade hardness can affect the fineness of the printed pattern, causing the edges of the pattern to appear blurry or uneven.
Partial curing of ink upon exposure to light: During the printing process, ink may partially cure due to intense light exposure, affecting the meshing effect and resulting in an imprecise pattern.
3. Bubbles and Dents on the Printed Pattern Surface: The surface of the printed pattern exhibits bubbles or dents of varying sizes, detracting from its overall aesthetic appeal. Bubbles may rupture, causing ink to spill out and leave stains. Dents, on the other hand, can result in an uneven pattern with a poor tactile feel. The specific causes of this phenomenon are as follows:
The ink was not thoroughly stirred: Before use, the ink was not adequately stirred, causing the additives to fail to mix evenly with the ink, which may result in bubbles or pinholes.
Excessive ink viscosity: At lower temperatures, ink viscosity increases, reducing its defoaming ability and making it easier for bubbles to form.
Dust or impurities on the substrate surface: An unclean substrate surface may result in dimples or scratches on the printed pattern’s surface.
II. Issues Regarding the Printing Material
1. Yellowing of the substrate surface: The substrate surface exhibits noticeable yellow spots or overall yellowing, particularly when exposed to sunlight for extended periods or in high-temperature environments. This yellowing can cause color distortion in printed materials, thereby affecting their visual appeal. The specific causes of this phenomenon are as follows:
The substrate is sensitive to ultraviolet light: Certain substrates (such as polycarbonate) are sensitive to ultraviolet light with wavelengths shorter than 320 nanometers, making them prone to photooxidation and subsequent yellowing of the surface.
2. Deformation of the substrate: During the curing process, the substrate deforms due to thermal expansion, causing changes in the size and shape of the printed material. This deformation may manifest as bending, twisting, or unevenness, thereby affecting both the overall aesthetic appeal and practicality of the print. The specific causes of this phenomenon are as follows:
Thermal expansion during curing: The substrate deforms due to thermal expansion during the curing process. This can lead to changes in the size and shape of the printed material.
3. Poor Adhesion: Insufficient adhesion between the ink and the substrate results in printed materials easily peeling or cracking when subjected to external forces. Such peeling or cracking can occur at the edges of the printed design or across the entire pattern, leading to a decline in print quality. During friction tests or alcohol wiping, the ink tends to flake off or leave behind visible marks. The specific causes of this phenomenon are as follows:
Improper ink selection: If the ink’s polarity, flexibility, and degree of surface treatment do not match those of the substrate, it may result in poor adhesion.
Curing equipment issues: If the UV lamp’s linear power is too low, its penetration capability is insufficient, or its overall energy output is inadequate, it may result in incomplete ink curing, thereby affecting adhesion.
III. Summary
Poor phenomena that occur during the use of UV inks—such as printing defects and substrate issues—are key factors affecting the quality of printed materials. By thoroughly analyzing the root causes of these problems and implementing appropriate measures for improvement and optimization, we can effectively enhance both the printing quality and production efficiency of UV inks.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
Common Adverse Phenomena When Using UV Inks (Part 1)
UV inks, with their unique curing mechanism and outstanding printing performance, have been widely adopted in the printing industry. However, during actual use, UV inks can also exhibit certain undesirable phenomena, such as curing problems and issues related to ink performance. These problems directly affect the quality and stability of printed materials.
Method for Determining Various Performance Indicators of UV Inks (Part 3)
With growing environmental awareness and the deepening of the sustainable development philosophy, UV inks—representing green printing materials—have become a focal point of industry attention regarding the evaluation of their environmental performance and overall operational effectiveness. This article, starting from the fundamental characteristics of UV inks, introduces methods for determining their core performance indicators, with the aim of fostering innovation and wider adoption of UV ink technology and jointly promoting the green development of the printing industry.
Method for Determining Various Performance Indicators of UV Inks (Part 2)
As consumers’ demands for print quality continue to rise, UV inks—being an essential material in modern printing processes—directly influence the visual appeal and durability of the final products. Therefore, adhering to a systematic and standardized system for measuring UV ink performance indicators is not only an inevitable choice to meet market needs but also a crucial step in driving the continuous advancement of printing technology.