Method for Determining Various Performance Indicators of UV Inks (Part 3)


With growing environmental awareness and the deepening of the sustainable development philosophy, UV inks—representing green printing materials—have become a focal point of industry attention regarding the evaluation of their environmental performance and overall operational effectiveness. This article, starting from the fundamental characteristics of UV inks, introduces methods for determining their core performance indicators, with the aim of fostering innovation and wider adoption of UV ink technology and jointly promoting the green development of the printing industry.

I. Thixotropy

Thixotropy is typically evaluated by measuring the changes in viscosity of an ink under different shear rates. This can be done using a rheometer, which applies a series of shear rates of varying magnitudes to an ink sample while simultaneously monitoring and recording the ink’s viscosity response in real time. By observing how the viscosity of the ink changes at different shear rates, we can gain insight into the strength and characteristics of its thixotropic behavior.

II. Smell

Subjective evaluation is primarily conducted through human olfaction. Ink samples can be placed in a sealed container, and then the container can be opened to smell the odor. At the same time, an odor assessment instrument can also be used for objective, quantitative evaluation, enabling a more accurate assessment of the ink’s odor characteristics.

3. Solvent Resistance

The solvent resistance of UV offset inks is tested by dropping a solvent onto the ink after it has fully cured. Observe whether the ink exhibits phenomena such as swelling, softening, or dissolution upon contact with the solvent. Inks with better solvent resistance remain stable when exposed to the solvent.

IV. Acid and Alkali Resistance

By placing UV ink samples into acid and alkaline solutions of specific concentrations and observing changes in the ink’s color, brightness, and color difference, we can evaluate its acid-alkali resistance. After drying, ink scrapings are immersed separately in acid and alkaline solutions of prescribed concentrations. After a specified period, the scrapings are removed and evaluated based on the observed changes. If the ink remains stable in both acidic and alkaline solutions, it indicates good acid-alkali resistance.

V. Oxidation Resistance

Oxidation resistance is typically evaluated by simulating the changes in ink performance when exposed to an oxidizing environment. Ink samples can be placed in a solution containing an oxidizing agent, and their color changes, viscosity changes, and other performance indicators can be observed. However, the specific testing methods may vary depending on the type and intended use of the ink, and should be selected based on the actual situation.

VI. Content of Harmful Substances

The content of harmful substances in ink, including heavy metals and volatile organic compounds (VOCs), can be detected using chemical analytical methods. Techniques such as gas chromatography and atomic absorption spectroscopy can be employed for this purpose. First, an appropriate amount of ink sample is subjected to preliminary treatment, such as dissolution or dilution. Then, the sample is analyzed using instruments like a gas chromatograph or an atomic absorption spectrophotometer. Based on the analysis results, the content of harmful substances in the ink can be determined.

7. Volatile Organic Compound (VOC) Content

Before testing, the ink samples undergo pretreatment, such as heating to volatilize certain components. Subsequently, specialized VOC detectors or gas chromatographs are used for measurement. These instruments can accurately determine the VOC content in the ink and are employed to evaluate the ink’s environmental performance.

VIII. Heavy Metal Content

The determination is carried out using methods such as atomic absorption spectroscopy and inductively coupled plasma mass spectrometry. These methods can accurately measure the content of heavy metals in inks and are used to evaluate the safety performance of inks.

9. Conclusion

In summary, the determination of UV ink performance indicators is a complex process that involves multidisciplinary knowledge. It requires us to flexibly apply modern analytical techniques and standardized testing methods on the basis of a thorough understanding of the chemical properties of inks. The measurement of various performance indicators of UV inks not only provides a scientific foundation for evaluating their performance but also lays a solid groundwork for the printing industry’s transition toward greater environmental friendliness, higher efficiency, and greater personalization.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


Method for Determining Various Performance Indicators of UV Inks (Part 2)

As consumers’ demands for print quality continue to rise, UV inks—being an essential material in modern printing processes—directly influence the visual appeal and durability of the final products. Therefore, adhering to a systematic and standardized system for measuring UV ink performance indicators is not only an inevitable choice to meet market needs but also a crucial step in driving the continuous advancement of printing technology.


Method for Determining Various Performance Indicators of UV Inks (Part 1)

As an essential component of modern printing technology, accurately measuring the performance indicators of UV inks is crucial for ensuring the quality and stability of printed materials. Thanks to their unique curing mechanism and excellent printing performance, UV inks have found widespread applications in various fields, including packaging, advertising, and publishing. However, to ensure that UV inks can meet diverse printing requirements, we must conduct rigorous and precise measurements of their various performance indicators.


Other performance indicators of UV inks

As an important material in the modern printing industry, the performance characteristics of UV inks directly affect the quality and environmental friendliness of printed materials. The chemical and environmental performance indicators of UV inks are key factors in assessing their quality; they not only influence the visual appeal and durability of printed products but also have implications for the health of operators and the sustainable development of the environment.