-
Product Center
-
-
Contact Us
-
Language
Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
The fastest 3D printing method for materials such as metals and ceramics.
Release time:
2025-01-10 17:03
Binder jetting is a three-dimensional printing process that uses a liquid binder to bond powdered metal materials layer by layer, thereby creating solid, complex-shaped parts. This technology combines features of both powder-bed fusion and material jetting. In binder jetting, the binder is deposited onto a layer of powder, bonding individual areas together to form a solid part—one layer at a time. The materials most commonly used in binder jetting include granular metals, sand, and ceramics.
In the binder jetting process, a recoating blade spreads a thin layer of powder onto the build platform. A carriage equipped with inkjet printer nozzles then traverses over the powder layer, selectively depositing droplets of binder liquid that bind the powder particles together. Once a layer is complete, the build platform moves downward, and the blade recoats the surface of the part. This process continues iteratively until the entire part is fully built. After printing, the part is sealed in a bed of powder and allowed to cure and gain strength. Finally, the part is removed from the powder bed and any loose powder is carefully cleaned away. Since parts extracted directly from the binder jetting printer are brittle, components manufactured using binder jetting technology undergo sintering during post-processing steps to enhance their strength.
Compared to traditional metal injection molding and other forms of metal 3D printing, binder jetting has the following advantages.
I. A wide variety of material choices.
Binder jetting is compatible with a wide variety of powder materials currently available, and since powder metals can be sintered to full density in many other conventional manufacturing processes, proponents of binder jetting claim that it has the potential to surpass powder-bed fusion in terms of applications and offers the broadest material selection of all additive manufacturing processes.
II. Save materials.
The binder jetting printing process is carried out at room temperature, which avoids issues related to thermal residual stresses and allows the powder surrounding the parts in the build box to be recycled, thereby reducing material costs.
3. No support.
For any part geometry produced via binder jetting, the need for support structures is significantly reduced, as the powder bed typically provides sufficient support. This translates into greater design freedom, less material waste, less time and labor required to remove supports, and more space for nesting multiple parts within a single build volume.
4. Fast production efficiency.
The adhesive jetting process is fast and has high productivity, enabling the cost-effective and efficient production of large volumes of parts.
5. Multi-functional output.
Based on the sintering temperature and time, binder jetting can produce materials with varying densities and controlled porosity, enabling a wide range of applications.
Although binder jetting machines can deposit numerous binder droplets at once, thereby reducing manufacturing time and boosting productivity, post-processing remains one of the key limitations of binder jetting—especially when using metal and ceramic powders. These materials must undergo degreasing and sintering steps, which not only extend the processing time but also affect the final part’s dimensional accuracy and surface quality.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
Fax: +86 20-3437 9190
Address: 8-9 / F,Building B,Pazhou Science and Technology Park, Xingang East Road, Haizhu District, Guangzhou City, Guangdong Province
Follow us
Copyright © Guangdong Bossin Novel Materials Technology Co., Ltd. All rights reserved.