-
Product Center
-
-
Contact Us
-
Language
Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Multi-material color 3D printing technology
Release time:
2025-01-10 17:03
Today, we’ll introduce an additive manufacturing process based on jetting technology: material jetting.
Material jetting 3D printing technology uses a technique similar to that of inkjet printers, depositing tiny droplets of photosensitive polymers or wax onto a build platform. These materials solidify when exposed to ultraviolet light, layer by layer, to construct three-dimensional objects. This technology enables rapid, continuous deposition of material along straight lines, allowing multiple objects to be fabricated in a single print job and even permitting the printing of different materials within the same object.
Let’s summarize the advantages of material jetting technology.
I. Fast Printing Speed
In terms of printing speed, material jetting technology typically achieves higher speeds than other 3D printing technologies—especially when printing multiple parts at once.
II. Extremely high precision
Material jetting technology, with its exquisite craftsmanship, disperses tiny resin droplets just right, achieving layer heights as thin as 13 microns. This not only enables the precise reproduction of even the tiniest details but also produces surfaces that are smooth and comparable to those achieved through injection molding. Each print represents an unwavering pursuit of ultimate precision.
3. Color Printing
Thanks to the multiple nozzles equipped on each print head, this technology enables full-color 3D printing by precisely jetting dyes onto the substrate, reproducing tens of thousands of colors across the entire CMYK spectrum. This technology can even produce colors within transparent, glass-like components.
4. Multi-material printing
The design of multiple nozzles enables the simultaneous deposition of up to eight different materials in a single print. By incorporating various materials into different parts of the component, material jetting can produce parts that not only exhibit outstanding mechanical properties but also feature smooth surface finishes. This system is capable of fabricating color parts that are both crisp and flexible in a single operation, showcasing the limitless potential of material combinations.
V. Soluble Support
Although material jetting is not a support-free technology, it does make removing supports during post-processing remarkably simple. Most material-jetting printers use soluble materials as supports, which can be easily dissolved in an ultrasonic bath with minimal or no residual traces left on the surface.
Although material jetting printers are both fast and accurate, their high cost—both for the printers themselves and for the materials they use—limits their widespread adoption among projects with limited budgets or individual hobbyists.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
Fax: +86 20-3437 9190
Address: 8-9 / F,Building B,Pazhou Science and Technology Park, Xingang East Road, Haizhu District, Guangzhou City, Guangdong Province
Follow us
Copyright © Guangdong Bossin Novel Materials Technology Co., Ltd. All rights reserved.