Solutions to Common Issues in UV Coatings (Part 2)


UV coatings have found widespread application in various fields—including wood processing, automobile manufacturing, and electronics—thanks to their advantages such as rapid curing speed, energy efficiency, environmental friendliness, and excellent coating performance. However, during actual use, UV coatings can also encounter certain issues, such as significant variations in the gloss of the topcoat, sticky paint that doesn't fully dry, strong odors after UV curing, undercutting, oiling-out, and yellowing of the coating film. These problems not only affect the aesthetic quality of the product but may also negatively impact its performance and service life. Therefore, it is particularly important to address these common issues when using UV coatings.

1. Large gloss deviation in the topcoat

1. Optimize the coating formulation: By adjusting the proportions of resins, pigments, fillers, and other components in the coating formulation, ensure formulation stability and improve the consistency of glossiness.

2. Adjust coating process parameters: Maintain consistency in coating process parameters, such as spray gun pressure, paint output, and coating film thickness, to minimize gloss variations.

3. Optimize curing conditions: Ensure that curing conditions—such as curing temperature and curing time—are consistent to improve the uniformity of gloss.

4. Regularly inspect equipment: Routinely check the coating and curing equipment to ensure they are operating properly and to prevent gloss deviations caused by equipment malfunctions.

II. The paint doesn't dry and sticks to your hands.

1. Increase the curing machine’s power: Ensure that the curing machine has sufficient power to meet the coating’s curing requirements.

2. Extend the curing time: Based on the curing characteristics of the coating, appropriately extend the curing time to ensure that the coating is fully cured.

3. Optimize the coating formulation: Adjust the proportions of components such as resin and curing agent in the coating formulation to enhance the curing speed and degree of the coating.

4. Regularly inspect equipment: Routinely check the curing equipment to ensure it’s operating properly and prevent poor coating curing caused by equipment malfunctions.

3. Strong odor after UV curing

1. Use low-VOC coatings: Choose coatings with lower levels of volatile organic compounds to reduce odors after curing.

2. Optimize curing conditions: Ensure the coating is fully cured and reduce residual odors during the curing process.

3. Strengthen equipment ventilation: Install ventilation devices in the curing equipment to ensure smooth exhaust and promptly remove odors generated during the curing process.

4. Undercutting Phenomenon

1. Optimize the coating formulation: Adjust the proportions of components such as resins and solvents in the coating formulation to enhance compatibility and adhesion, thereby preventing bottom-biting phenomena.

2. Adjust curing conditions: Based on the curing characteristics of the coating, adjust parameters such as curing temperature and curing time to ensure that the underlying coat is fully cured before applying the topcoat.

3. Ensure the primer is fully cured: Before applying the topcoat, make sure the primer has completely cured to prevent “undercutting” caused by the primer not being fully dry.

V. Oil Migration Phenomenon

1. Increase the viscosity of the coating: Raising the viscosity of the coating helps reduce dripping and splashing during the spraying process, thereby preventing oiling issues.

2. Increase coating film thickness: Appropriately increasing the coating film thickness can help reduce shrinkage and deformation during the curing process, thereby minimizing oiling phenomena.

3. Reduce the evaporation rate of solvents: Choose solvents with slower evaporation rates, or reduce ventilation in the coating environment to slow down solvent evaporation and minimize oil running.

4. Adjust the spray gun distance and oil output: Maintain an appropriate spray gun distance and oil output to ensure even coating application and prevent localized thinning that could lead to paint running.

6. Yellowing of the paint film

1. Select coating ingredients that are resistant to oxidation: Choose coating ingredients with better antioxidant performance, such as UV stabilizers and antioxidants, to reduce yellowing of the paint film.

2. Optimize curing conditions: Avoid the influence of factors such as high temperatures and ultraviolet radiation; select appropriate curing temperature and duration to minimize yellowing of the paint film.

3. Strengthen the storage and management of coatings: Avoid exposing coatings to sunlight or high-temperature environments for extended periods. Maintain a cool, dry, and well-ventilated storage environment to minimize yellowing of the paint film. At the same time, regularly check the expiration dates and storage conditions of coatings to ensure their quality.

VII. Summary

For common issues encountered in the use of UV coatings, effective solutions can be achieved through various measures, such as optimizing the coating formulation, adjusting coating process parameters, ensuring consistent curing conditions, and conducting regular inspections and maintenance of coating equipment. In practical operations, it is essential to develop targeted solutions based on the specific causes of the problems and the actual situation, while also strengthening process control and quality assurance to ensure the effectiveness of UV coatings and the quality of the coated surfaces.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


Solutions to Common Problems in UV Coatings (Part 1)

During the coating application process, various challenges often arise, such as sagging, pinholes, dullness, and fish-eye defects. These issues not only affect the aesthetic quality of the coating but can also negatively impact the durability and performance of the product. To ensure optimal coating results, enhance product quality, and boost customer satisfaction, we need to gain a deeper understanding of the root causes of these coating problems and implement appropriate solutions.


Common Issues in the Application of UV Coatings

In the field of modern industrial coating, UV coatings have been widely adopted due to their remarkable advantages, such as high efficiency, environmental friendliness, and energy savings. Not only do they significantly boost production efficiency, but they also effectively reduce emissions of volatile organic compounds, aligning with the current trend toward green manufacturing. However, in practical applications, UV coatings are not entirely flawless and often encounter a range of issues. These problems not only affect the aesthetic quality of the coating but can also negatively impact the performance and service life of the product.


What are the application areas of UV coatings?

UV coatings are a new type of coating that cures through the use of ultraviolet radiation and offer significant advantages. First, UV-curable coatings can be used in ink printing and exposed to UV irradiation; their solid content can reach as high as 100%, with no volatile components, thus preventing environmental pollution. The high solid content also enables these coatings to be applied in extremely thin films, thereby enhancing both the performance and application scope of the coating. UV-curable coatings have numerous benefits, including being free of volatile organic compounds, causing minimal environmental pollution, curing rapidly, saving energy, and delivering excellent cured product performance—making them well-suited for high-speed automated production. As a result, they are now widely used across multiple industries.