Common Issues in the Application of UV Coatings


In the field of modern industrial coating, UV coatings have been widely adopted due to their remarkable advantages, such as high efficiency, environmental friendliness, and energy savings. Not only do they significantly boost production efficiency, but they also effectively reduce emissions of volatile organic compounds, aligning with the current trend toward green manufacturing. However, in practical applications, UV coatings are not entirely flawless and often encounter a range of issues. These problems not only affect the aesthetic quality of the coating but can also adversely impact the performance and service life of the product.

I. Sagging Phenomenon

The sagging phenomenon is one of the most common defects that occur during the baking and leveling stage after spraying, and it is particularly noticeable in vertical coating applications. The defect manifests as small droplets of paint flowing vertically along edges and corners, resulting in surface imperfections. The occurrence of sagging is mainly attributed to low paint viscosity, insufficient solid content, slow solvent evaporation rate, excessive spray gun distance or overspray volume, too slow line speed, excessive coating film thickness, and excessively high baking temperature.

II. Pinhole Issue

The bubbles on the topcoat resemble tiny pits with small holes in the middle, densely indented into the coating surface—this is known as pinholing. The occurrence of pinholing is mainly caused by factors such as excessively high paint viscosity, overly thick coating film, rapid solvent evaporation, insufficient infrared leveling temperature, or excessively fast UV curing line speed.

III. Foglight Phenomenon

After curing, the high-gloss UV topcoat exhibits a surface defect resembling a foggy film. This issue is most likely to occur on single-component black primers. The appearance of the foggy effect is primarily caused by low coating viscosity, insufficient solid content, slow solvent evaporation rate, excessive spray gun distance or overspray volume, too slow line speed, excessive coating film thickness, and excessively high baking temperature.

IV. Fish-eye Effect

A fish-eye, also known as a crater, typically appears as a round, sunken mark with raised edges, resembling a fish’s eye. The occurrence of fish-eye defects is mainly caused by inadequate cleaning of the workpiece and the surrounding environment, as well as malfunctions in the compressed-air filtration system, which result in impurities or oil contamination in the coating material.

5. Large gloss deviation in the topcoat

After the topcoat has cured, significant differences in gloss levels may occur across different areas of the workpiece, or between different workpieces. This is mainly due to unstable coating formulations, inconsistent coating process parameters, varying curing conditions, or equipment malfunctions.

6. The paint doesn't dry and sticks to your hands.

After UV coating application and curing in the curing oven, the coating fails to dry completely, leaving a sticky feel when touched by hand. This issue is mainly caused by insufficient curing oven power, inadequate curing time, improper coating formulation, or equipment malfunction.

7. Strong odor after UV curing

UV coatings that have been cured for a long time still emit a strong, unpleasant odor. This is mainly due to the presence of volatile organic compounds in the coating, incomplete curing, or inadequate ventilation from the equipment.

8. Undercutting Phenomenon

After UV coating cures, the topcoat may dissolve the underlying coat, even causing the underlying coat to detach from the substrate and bulge upward. This is mainly due to improper coating formulation, unsuitable curing conditions, or incomplete curing of the underlying coat.

9. Oil Migration Phenomenon

After UV coating cures, the surface exhibits small, unevenly distributed circular pits (craters) of varying sizes. This phenomenon is mainly caused by low coating viscosity, excessively thin coating film thickness, rapid solvent evaporation, excessive spray gun distance, or insufficient paint output.

10. Yellowing of the paint film

After a period of time, the paint film exhibits yellowing. This is mainly due to the presence of oxidation-prone components in the coating or to the influence of factors such as ultraviolet radiation and high temperatures during the curing process.

11. Summary

In summary, UV coatings do indeed face a variety of challenges in practical applications, involving aspects such as coating formulations, application processes, curing conditions, and equipment malfunctions. To address these issues, we need to tackle them at the source by strictly controlling coating quality, optimizing application process parameters, ensuring the stability and consistency of curing conditions, and performing regular maintenance and upkeep on equipment. Only in this way can we fully leverage the advantages of UV coatings, enhance product coating quality, and improve our market competitiveness.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


What are the application areas of UV coatings?

UV coatings are a new type of coating that cures through the use of ultraviolet radiation and offer significant advantages. First, UV-curable coatings can be used in ink printing and exposed to UV irradiation; their solid content can reach as high as 100%, with no volatile components, thus preventing environmental pollution. The high solid content also enables these coatings to be applied in extremely thin films, thereby enhancing both the performance and application scope of the coating. UV-curable coatings have numerous benefits, including being free of volatile organic compounds, causing minimal environmental pollution, curing rapidly, saving energy, and delivering excellent cured product performance—making them well-suited for high-speed automated production. As a result, they are now widely used across multiple industries.


Preparation and Production of UV Coatings

In today’s rapidly developing industrial and everyday life, coatings—indispensable surface-decorating materials—not only impart aesthetically pleasing appearances to objects but also play crucial roles in protecting substrates and enhancing durability. With growing environmental awareness and technological advancements, ultraviolet (UV) curing coatings have attracted considerable attention in the coatings industry due to their high efficiency, energy savings, and eco-friendliness. The preparation and production of UV coatings is a process involving multiple steps and chemical reactions; from raw material selection to production techniques, every step requires stringent control.


How to Select Raw Materials for UV Coatings (Part 2)

In the formulation of UV coatings, the selection of raw materials is a complex and meticulous process that requires comprehensive consideration of the coating’s performance requirements, the characteristics of the substrate, and other relevant factors. By making rational choices, it is possible to ensure that the coating exhibits outstanding performance and meets the needs of various application scenarios. In the previous issue, we discussed the selection principles for oligomers and reactive diluents; in this issue, we will continue by introducing the key factors to consider when choosing photoinitiators and additives in UV coating formulations.