How to Select Raw Materials for UV Coatings (Part 2)


In the formulation of UV coatings, the selection of raw materials is a complex and meticulous process that requires comprehensive consideration of the coating’s performance requirements, the characteristics of the substrate, and other relevant factors. By making rational choices, it is possible to ensure that the coating exhibits outstanding performance and meets the needs of various application scenarios. In the previous issue, we discussed the selection principles for oligomers and reactive diluents; in this issue, we will continue by introducing the key factors to consider when choosing photoinitiators and additives in UV coating formulations.

I. Photoinitiator

When selecting a photoinitiator, the following factors should be considered:

1. Absorption spectrum

(1) The absorption spectrum of the photoinitiator must match the emission spectral band of the radiation source. This is to ensure that the photoinitiator can efficiently absorb light energy and convert it into chemical energy, thereby initiating the polymerization reaction.

(2) The molar extinction coefficient is an important indicator for measuring the ability of a photoinitiator to absorb light energy. A higher molar extinction coefficient means that the photoinitiator has stronger absorption capacity at a specific wavelength, and thus is more likely to initiate an efficient polymerization reaction.

2. Stability

(1) The photoinitiator and its photolytic products should be non-toxic and odorless to ensure the safety of operators and the environmental friendliness of the coating.

(2) Good stability is crucial for the long-term storage and use of photoinitiators. During storage, photoinitiators should be resistant to decomposition or other side reactions, ensuring their performance remains stable and reliable.

3. Trigger efficiency

(1) A higher initiation efficiency means that the photoinitiator can rapidly trigger the polymerization reaction even at lower dosages. This not only reduces production costs but also enhances production efficiency.

(2) A fast initiation rate is also an important property of photoinitiators. Rapid initiation can shorten the curing time, thereby improving both the curing efficiency and the curing quality of coatings.

4. Solubility

(1) The photoinitiator should have good solubility and reactivity to ensure it can be uniformly dispersed throughout the coating system.

(2) Good compatibility with oligomers and reactive diluents is also an important consideration in the selection of photoinitiators. Good compatibility can prevent layering or precipitation, thereby enhancing the stability and uniformity of the coating.

5. Thermal Stability

(1) A basic requirement for the thermal stability of photoinitiators is that they do not decompose below 85℃. This ensures that the photoinitiators will not decompose or degrade due to temperature increases during processing, transportation, and storage.

(2) Long-term storage stability is also an important consideration in the selection of photoinitiators. Good long-term storage stability ensures that the photoinitiator maintains its performance and reliability over an extended period of use.

6. Yellowing resistance

After light curing, there should be no yellowing phenomenon—this is particularly important for white, light-colored, and colorless systems. Residual photoinitiators with poor yellowing resistance and their subsequent decomposition significantly contribute to yellowing of the coating film.

7. Adaptability to specific application domains

Different application fields—such as coatings, inks, adhesives, and others—may require different types of photoinitiators. Therefore, when selecting a photoinitiator, it is essential to make the choice based on the specific requirements of the intended application field.

II. Additives

The selection and dosage of additives significantly influence UV coatings. It is crucial to carefully consider multiple factors in order to ensure the coating’s overall performance, processing efficiency, environmental friendliness, and cost-effectiveness. The following provides an in-depth analysis of these factors.

1. Defoamer

When selecting a defoamer, consider its compatibility with the coating system, its defoaming effectiveness, and its stability. The defoamer specifically developed for UV-curable coatings is designed to effectively eliminate foam during the coating application process, ensuring both the aesthetic appeal and performance of the coating.

2. Leveling agent

The selection of a leveling agent should be based on the type of coating, the application conditions, and the desired film properties. Silicone-based leveling agents offer excellent leveling and smoothness, but their compatibility and feel may need to be carefully balanced.

3. Wetting and dispersing agent

The selection of a wetting and dispersing agent should take into account its dispersion efficiency, stability, and impact on coating performance. Dispersing agents promote the uniform dispersion of pigments and fillers in coatings, preventing agglomeration and sedimentation.

4. Adhesion promoter

The selection of adhesion promoters should be based on the type of substrate and the performance requirements of the coating. For substrates that are difficult to adhere to, such as metals and plastics, promoters with excellent adhesion properties should be chosen.

5. Matting agent

The selection of matting agents should take into account their refractive index, oil absorption value, and impact on the transparency of coatings. For example, silica matting agents offer excellent matting performance while having minimal impact on coating transparency.

6. Polymerization inhibitor

The selection of a polymerization inhibitor should be based on the storage stability requirements of the coating and the application conditions. For coatings that need to be stored for extended periods, an inhibitor with excellent polymerization-inhibiting performance should be chosen.

An appropriate amount of a polymerization inhibitor can enhance the storage stability of coatings and prevent thermal polymerization reactions from occurring. However, adding too much inhibitor may adversely affect the curing speed and performance of the coating. Moreover, the effectiveness of the polymerization inhibitor depends on the presence of oxygen; therefore, the container used for storing the coating must allow sufficient air to circulate.

III. Summary

The selection of photoinitiators and additives plays a crucial role in UV coating formulations. These components not only directly affect the curing efficiency, physical properties, and aesthetic appearance of the coatings but also profoundly influence the safety and environmental friendliness of production operations as well as the cost-effectiveness of the final products. By making scientifically sound and rational choices of raw materials, it is possible to ensure that UV coatings exhibit outstanding performance, meet the requirements of various application scenarios, and simultaneously maximize economic benefits.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


How to Select Raw Materials for UV Coatings (Part 1)

UV coatings are widely used in various fields, including ink printing, furniture manufacturing, wood processing, paper coating, and plastic finishing. They not only offer numerous advantages such as rapid curing and room-temperature curing but also enhance the performance of finished products. The main components of UV coatings include oligomers, reactive diluents, photoinitiators, and additives. When designing formulations for light-curable coatings, it is essential to take multiple factors into account comprehensively and select appropriate raw materials to achieve the optimal coating formulation.


Composition of UV coatings

UV coatings, or ultraviolet-curable coatings, are a special type of coating whose curing process relies primarily on ultraviolet radiation. UV coatings typically consist of oligomers, reactive diluents, photoinitiators, and other functional additives. Under UV irradiation, these components undergo a chemical reaction that forms a crosslinked polymer network, rapidly transforming the liquid coating into a solid film.


What is UV coating?

In modern industry, coatings play an irreplaceable role as key materials for surface protection and decoration. As a new type of environmentally friendly coating, UV coatings have gradually become the industry’s favorite due to their remarkable advantages, including rapid curing speed, energy efficiency, environmental friendliness, and strong adaptability, and they are now widely used in various fields.