Composition of UV coatings


UV coatings, or ultraviolet-curable coatings, are a special type of coating whose curing process relies primarily on ultraviolet radiation. UV coatings typically consist of oligomers, reactive diluents, photoinitiators, and other functional additives. Under ultraviolet irradiation, these components undergo a chemical reaction, forming a crosslinked polymer network that rapidly transforms the liquid coating into a solid film.

Specifically, under the action of ultraviolet photons, the photoinitiator in UV coatings absorbs light energy and converts it into chemical energy, thereby triggering a chemical reaction between oligomers and reactive diluents to form a dense three-dimensional network structure. This structure imparts to the cured UV coating excellent physical and chemical properties, such as high hardness, wear resistance, chemical resistance, high gloss, and good adhesion and flexibility.

The components of UV coatings mainly include the following parts:

I. Oligomer

Oligomers are the main component and backbone of UV-curable coatings; they are also referred to as prepolymers. Their defining characteristics include low molecular weight, the presence of specific polymerizable functional groups, and relatively high viscosity. Oligomers significantly influence many physicochemical properties of the coating film, such as hardness, abrasion resistance, flexibility, adhesion, gloss, and aging resistance.

The primary role of oligomers in UV coatings is as the main resin, which, under the action of ultraviolet photons, forms a three-dimensional film structure and imparts various properties to the coating. In the photopolymerization reaction, oligomers undergo crosslinking polymerization together with reactive diluents and photoinitiators, creating a highly crosslinked network structure that enhances the performance of the coating film.

II. Reactive Diluent

An active diluent, also known as a monomer or functional monomer, is an organic small molecule containing polymerizable functional groups. It can both dissolve or disperse film-forming substances and participate in the film-forming reaction during the coating process, becoming a non-volatile component that remains in the coating film. Active diluents are used in high-solids and solvent-free coating systems and have a significant impact on the performance of coatings.

The primary functions of reactive diluents in UV coatings are to dissolve or disperse oligomers, adjust the viscosity of the system, and participate in the photopolymerization process, thereby influencing the photopolymerization rate of the coating as well as various properties of the dried film. For example, in free-radical photopolymerization systems, reactive diluents are predominantly acrylate monomers, which can rapidly initiate crosslinking polymerization of monomers and oligomers, facilitating the liquid-to-solid phase transition within the system.

III. Photoinitiator

A photoinitiator, also known as a photosensitizer or a light-curing agent, is a compound that can absorb energy at specific wavelengths in the ultraviolet (250–420 nm) or visible (400–800 nm) region, generating free radicals, cations, and other species that initiate the polymerization, crosslinking, and curing of monomers.

The primary function of a photoinitiator in UV coatings is to absorb light energy and split into active free radicals or cations, thereby initiating a chain polymerization reaction between the photosensitive resin and the reactive diluent, which leads to crosslinking and curing of the coating. The photoinitiator plays a decisive role in the curing rate, and its performance directly affects both the curing efficiency of the coating and the properties of the resulting film.

IV. Additives

Additives are auxiliary components in UV coatings, used to enhance the coating’s processability, storage stability, and application performance, improve the film properties, and impart specific special functions to the coated film. Commonly used additives in UV coatings include defoamers, leveling agents, wetting and dispersing agents, adhesion promoters, matting agents, and polymerization inhibitors.

V. Summary

As a highly efficient and environmentally friendly coating, UV coatings have a complex composition. However, the various components interact with and synergize with each other, collectively determining the coating’s performance and quality. During preparation and application, it is essential to take into account a wide range of factors, including the selection and proportioning of raw materials, mixing and dispersion, as well as filtration and defoaming. It is crucial to strictly control the proportions of each component and the process conditions to ensure the coating’s performance and quality.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


What is UV coating?

In modern industry, coatings play an irreplaceable role as key materials for surface protection and decoration. As a new type of environmentally friendly coating, UV coatings have gradually become the industry’s favorite due to their remarkable advantages, including rapid curing speed, energy efficiency, environmental friendliness, and strong adaptability, and they are now widely used in various fields.


The function of UV defoamers

A UV defoamer is a defoaming agent specifically designed for UV-curing systems. Its key features include stability under ultraviolet light and excellent defoaming performance. The UV defoamer works by reducing surface tension and disrupting the stability of foam, thereby effectively eliminating foam formation. Its unique chemical structure enables it to disperse rapidly in liquids and efficiently inhibit the formation and growth of foam. Moreover, thanks to its stability under ultraviolet light, it does not affect the product’s performance or color during the curing process.


What is a UV defoamer?

In the modern industrial sector—particularly in manufacturing industries such as coatings, inks, and adhesives—the issue of foam has long been a challenging problem that needs to be addressed. The presence of foam not only affects the uniformity of product mixing and the aesthetic appeal of coated surfaces but can also negatively impact the physical properties of the products. To tackle this issue, UV defoamers have emerged.