Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Modified trimethylolpropane triacrylate
Release time:
2024-09-11 23:32
Trimethylolpropane triacrylate (TMPTA) is a high-performance chemical substance prepared by esterification of trimethylolpropane (TMP) with acrylates. It features three acrylate functional groups, making it a trifunctional reactive diluent. TMPTA plays a crucial role in advanced material systems such as UV curing, thermal curing, and radiation curing. Its high reactivity and multifunctionality promote rapid crosslinking and curing of resins, thereby enhancing the physical properties and chemical stability of the final products. To further expand its application scope and improve its performance characteristics, we can chemically modify TMPTA by introducing various functional groups or chain segments, yielding a diverse range of modified products. Examples include 3EO-TMPTA, 3PO-TMPTA, and 9EO-TMPTA. These modified derivatives are designed to optimize TMPTA’s performance by increasing chain length, adjusting polarity, or altering other physicochemical properties.
I. Triethylene Glycol Diacrylate (3EO-TMPTA)
Ethoxylated trimethylolpropane triacrylate, also known as 3-ethoxytrimethylolpropane triacrylate, is a modified derivative of TMPTA. It is obtained by introducing an ethoxy (EO) functional group into the TMPTA molecule, thereby altering its original chemical structure and properties. The introduction of the ethoxy group endows 3EO-TMPTA with enhanced performance in certain application scenarios, including lower viscosity, faster curing speed, improved flexibility, and better adhesion.
TMPTA is synthesized by replacing each of the three hydroxyl groups of trimethylolpropane with an acrylate group; its chemical structure does not contain any ethoxy segments. In contrast, in 3EO-TMPTA, at least one hydrogen atom on an acrylate group is replaced by an ethoxy segment. An ethoxy segment typically consists of alternating oxygen atoms and ethyl groups, which increases the molecular length and flexibility.
3EO-TMPTA appears as a colorless or pale yellow, transparent liquid with the typical visual characteristics of acrylate compounds. It is insoluble in water but soluble in solvents such as aromatics and ethanol. The introduction of an ethoxy chain segment generally reduces the viscosity of 3EO-TMPTA and enhances its solubility in certain solvents. It exhibits excellent thermal stability and chemical stability, maintaining its properties unchanged under a wide range of environmental conditions. Compared to TMPTA, 3EO-TMPTA is softer, more flexible, and has superior adhesion. It features good curing speed, chemical resistance, low viscosity, low irritation, and excellent hardness.
3EO-TMPTA is a highly reactive crosslinking agent that undergoes polymerization upon the addition of free-radical-generating substances (such as photoinitiators) or exposure to free radiation. Its three functional groups—olefin, ester, and ether—primarily exhibit acrylate characteristics, making it readily susceptible to polymerization and endowing it with excellent reactivity in radiation-curing processes.
II. Propoxylated Trimethylolpropane Triacrylate (3PO-TMPTA)
Propoxylated trimethylolpropane triacrylate appears as a colorless or slightly yellowish, transparent liquid, similar in appearance to TMPTA. It is soluble in a variety of organic solvents but is virtually insoluble in water. Due to the introduction of the propoxy chain segment, the viscosity of 3PO-TMPTA is lower than that of TMPTA. As an active diluent, 3PO-TMPTA exhibits a more pronounced diluting effect.
3PO-TMPTA is also a compound obtained by modifying the chemical structure of TMPTA. By introducing propoxy (PO) segments into the TMPTA backbone, its original chemical structure and properties are altered. In 3PO-TMPTA, at least one hydrogen atom on an acrylate group or the portion directly bonded to it is replaced by a propoxy segment. The propoxy segment consists of alternating oxygen atoms and propyl groups, which increases the molecular length and flexibility. Despite these structural changes, both 3PO-TMPTA and TMPTA retain acrylate groups; therefore, they both exhibit high reactivity and crosslinking capability. Under conditions such as photopolymerization, thermosetting, or radiation curing, both compounds can rapidly participate in crosslinking reactions, forming a dense, interconnected network structure. Thanks to the flexibility of the propoxy segments, the film formed after curing 3PO-TMPTA demonstrates superior flexibility and impact resistance. Meanwhile, the introduction of propoxy segments also enhances other physical properties of the film, such as adhesion and gloss.
III. Triethylene Glycol Diacrylate (9EO-TMPTA)
9EO-TMPTA is modified based on TMPTA by introducing additional ethoxy (EO) functional groups. 3EO-TMPTA contains three ethoxy chain segments, whereas 9EO-TMPTA contains nine ethoxy chain segments.
9EO-TMPTA appears as a colorless or pale yellow transparent liquid. It is insoluble in water but soluble in organic solvents such as aromatic hydrocarbons and ethanol. An increase in the ethoxy chain length leads to enhanced intermolecular interactions, thereby increasing viscosity; consequently, the viscosity of 9EO-TMPTA is typically higher than that of 3EO-TMPTA. Due to the influence of the ethoxy chains, 9EO-TMPTA may exhibit a lower reaction rate and longer curing time. The elongation of the ethoxy chains can also improve the flexibility of the molecules. Therefore, the film formed after curing 9EO-TMPTA may be softer and more elastic than that formed by 3EO-TMPTA.
IV. Conclusion
In summary, these modified trimethylolpropane triacrylates not only continue to serve as highly effective reactive diluents but may also exhibit lower viscosity, better wettability, and higher curing rates, thereby meeting a wider range of industrial needs. They hold great potential for widespread applications, particularly in fields such as coatings, inks, adhesives, and composite materials.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
The Principle and Method of Ethoxy Modification of Reactive Diluents
Active diluents, as key components in epoxy resin curing systems, primarily function to effectively reduce the viscosity of epoxy resins, significantly enhancing their fluidity and wettability, thereby optimizing both construction operations and the curing process. Traditionally, these diluents have been composed mainly of monoepoxy and polyepoxy compounds; however, in practical applications, they often suffer from relatively high viscosity and unsatisfactory solubility. To overcome these challenges, researchers have innovatively introduced ethoxy-modification technology to improve active diluents, enhancing both their physical and chemical properties and enabling broader application possibilities.
Tri-functional acrylate diluent
Trifunctional acrylate diluents, as their name suggests, are compounds in which each molecule contains three acrylate functional groups. These diluents not only serve as diluents but also participate in the curing process, becoming an integral part of the cured film and thereby enhancing the crosslinking density and performance of the cured film. They typically exhibit characteristics such as low viscosity, high reactivity, and rapid curing. Trifunctional acrylate reactive diluents generally possess outstanding performance. Pentaerythritol triacrylate (PET3A) and trimethylolpropane triacrylate (TMPTA) are two of the most commonly used trifunctional reactive diluents in the photocuring industry.
Bisphenol A diacrylate is an important chemical substance prepared by polycondensation of bisphenol A and diacrylate. It contains two acrylate functional groups, making it a bifunctional reactive diluent. By introducing ethoxy groups, bisphenol A diacrylate (BPADA) can be modified into various derivatives. Among these, ethoxylated bisphenol A diacrylate (4EO-BPADA) and ethoxylated bisphenol A diacrylate (10EO-BPADA) are relatively commonly used and can both serve as reactive diluents.