News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Handling Poor Conditions in UV Gel Nail Polish (Part 10)

Release time:

2026-05-09 17:11

Handling Poor Conditions in UV Gel Nail Polish (Part 10)

Nail‑plate damage refers to issues such as delamination, thinning, or unevenness that appear on the surface of the natural nail after removing gel polish. The root cause of this problem lies in improper removal techniques. Unlike coating defects, nail‑plate damage directly affects the natural nail and compromises its health. This article will outline strategies for preventing nail‑plate damage and methods for restoring the nail once damage has occurred.

I. Preventive Measures for Nail Plate Injuries

1. When removing nail polish, avoid prying or scraping forcefully. Soak the polish thoroughly in remover to soften the gel, then gently push it off with a steel pusher. If you encounter resistance, it means the polish hasn’t fully softened—re‑soak it and refrain from applying excessive force. Forcibly prying is a major cause of damage to the nail surface, so we recommend breaking this habit.

2. Control the sanding pressure. When removing gel polish, simply buff the top coat to break the seal—there’s no need to sand away the entire layer. Use a fine-grit sponge buffer and apply light pressure. Electric buffers require professional training; we don’t recommend that home users operate them on their own.

3. Control the soaking time. Keep the nail polish remover soak to 10–15 minutes; do not exceed this duration. Once the allotted time has elapsed, remove the aluminum foil and check the degree of softening. If the gel has not yet softened, you may extend the soak slightly, but increase the time in 5‑minute increments to avoid prolonged soaking in one go.

4. Provide timely after‑care following nail removal. After removing your nails, apply a nourishing oil to hydrate the nail surface and the skin around the nails. While nourishing oils cannot repair already damaged nails, they can help alleviate dryness and create a healthier environment for new nail growth.

II. Methods for Recovery Following Injury to the Nail Plate

1. Stop getting manicures and give your nails a break. After damage occurs, avoid applying new gel polish. Allow your nails to grow naturally; the damaged portion will gradually move toward the tip as the nail grows and can be trimmed away, replaced by healthy new nail tissue. This process typically takes two to three months, depending on your nail growth rate.

2. Consistently apply nourishing oil. Apply it once or twice daily, focusing on the nail matrix to promote healthy growth of new nails. While nourishing oil cannot repair already damaged nails, it can help improve the overall condition of your nails.

3. Avoid further injury. During the recovery period, do not use your nails to pick at hard objects, and refrain from over‑buffing with a rigid nail file. Keep your nails clean and dry, and avoid prolonged soaking in water.

III. Conclusion

Managing damage to the nail plate hinges on prevention, as post‑injury recovery relies solely on the nail’s natural growth. When removing nail polish, avoid harsh picking, moderate the intensity of filing and the duration of soaking, and follow up with timely nourishment—these four preventive steps are key to safeguarding your nails. If damage does occur, discontinue manicuring to give your nails a break, consistently apply nourishing oils, and steer clear of further harm; these measures can help speed up healing. Nail health demands consistent, long‑term care; a single, well‑executed removal is far more beneficial than ten hasty touch‑ups.

Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.

Bosheng Related Product Recommendations – UV Nail Gel Polish
Base coat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-02H	Phosphate ester acrylate monomer	Enhance adhesion to substrates such as metal, glass, and plastic.
B-2016	Polyester acrylate	High molecular weight, excellent flexibility, strong adhesion, and low heat release.
B-2018	Aliphatic polyurethane acrylate	Good adhesion, excellent flexibility, and water resistance.
Colored glue
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-151DM	Modified epoxy acrylate	Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion.
B-162	Epoxy acrylate	Fast curing, low odor, high gloss, and high fullness.
B-166A	Modified epoxy acrylate	Good flexibility and strong adhesion
B-166A-85	Modified epoxy acrylate	Good flexibility, excellent adhesion, contains 15% HEMA.
B-166A-85P	Modified epoxy acrylate	Good flexibility, excellent adhesion, contains 15% HEMA.
B-27	Active amine photosensitizing promoter	Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor
B-296	Aliphatic polyurethane acrylate	Fast curing, chemical resistance, yellowing resistance, impact resistance
Extended glue
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-210D	Aliphatic polyurethane acrylate	Fast curing, low heat of reaction, and excellent toughness.
T-2022D	Aliphatic polyurethane acrylate	Non-sticky, low heat generation, excellent adhesion, high hardness
Sealant adhesive
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-376	Aliphatic polyurethane acrylate	LED yellowing is minimal, and the nail polish formulation exhibits excellent stability.
B-412T-6	Aliphatic polyurethane acrylate	Good toughness, free of organotin compounds, and excellent stability of the nail polish formulation.
Matte sealant
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a delicate, smooth hand feel.
B-329D	Aliphatic polyurethane acrylate	Low irritation, low viscosity, excellent wettability, and a pleasant feel.
One-step adhesive
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-315	Aliphatic polyurethane acrylate	Wear and chemical resistance, high hardness, toughness, and yellowing resistance
Type A piece
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, containing 20% TPGDA.
B-216	Aliphatic polyurethane acrylate	Fast curing, high fullness, and excellent toughness.
B-268M	Aliphatic polyurethane acrylate	Good flexibility, excellent adhesion, superior plating performance, and strong hiding power.
B-619W	Aliphatic polyurethane acrylate	Fast curing, high hardness, excellent toughness, wear resistance, and chemical resistance.
Monomer Recommendation
Product Model/English Abbreviation	Product Name/Product Type	Product Features
BM1211 (HPMA)	Hydroxypropyl methacrylate	HEMA-free, high strength, low irritation, and excellent adhesion

Share to:

What is a matte top coat for UV gel polish?

Handling Poor Conditions in UV Gel Nail Polish (Part 9)