-
Product Center
-
-
Contact Us
Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Handling Poor Conditions in UV Gel Nail Polish (Part 9)
Release time:
2026-05-09 07:06
Edge lifting is an early sign of nail polish gel detachment, occurring when the polish begins to separate from the nail’s free edge or side edges. This issue directly affects the longevity of the manicure. Unlike full‑sheet peeling, edge lifting has a distinct starting point and can be promptly repaired if caught early. This article will outline strategies for addressing edge lifting, covering both preventive measures and post‑peel remediation techniques.
I. Preventive Measures for Edge Lifting
1. Ensure that each layer of gel fully covers the nail’s free edge. When applying the base coat, color gel, and top coat, pay close attention to covering the nail’s free edge at every step. Properly sealing the free edge is a critical step. To do this: after applying an even layer, dip the brush tip into a small amount of gel and gently dab it along the edge of the nail’s free edge, ensuring the gel fully coats the cuticle area. After sealing, carefully inspect for any missed spots.
2. Reinforcement for users with thin nails: For those whose nail tips are excessively thin, apply an additional layer of strengthening gel to the tip area after the base coat and before the color coat. Once cured, this strengthening gel will increase the tip’s thickness, providing a more robust bonding foundation.
3. Take care of your nails in daily use. Avoid using the edge of your fingernails to open soda cans or pry objects. When typing on the keyboard for extended periods, be sure to take regular breaks. Making these simple adjustments can help prolong the longevity of your manicure.
II. Methods for Addressing Edge Lifting After It Occurs
1. Repairing minor lifting. If the lifted area is small, dip a cleaning pen or cotton swab into a cleaning solution and gently wipe along the lifted seam to remove any trapped moisture and grime. Then, use the brush tip to apply a small amount of sealing adhesive to the lifted area, allowing it to seep into the gap and coat the edges of the lift, before curing under a lamp.
2. Repairing noticeable lifting. If the lifted area is extensive, gently sand the raised section with a sanding stick, smoothing the edges to achieve a uniform finish. After cleaning, apply a thin coat of primer and allow it to cure, then apply color gel and a topcoat, ensuring that the edges of the new layer blend seamlessly with the existing coating.
3. Complete redo. If the lifting has spread to most of the nail surface, it’s more reliable to remove the entire manicure and start over rather than attempting a partial repair.
III. Conclusion
Addressing edge lifting requires a combination of preventive measures and prompt intervention. Each application should fully encapsulate the leading edge, with extra reinforcement for users of thin‑layer nail polish; during daily wear, take care to protect the nails. These precautions can significantly reduce the likelihood of lifting. If lifting does occur, minor lifts can be repaired by applying a spot of topcoat adhesive, while more pronounced lifts should be sanded down and recoated. In cases of severe spreading, the polish should be removed entirely and reapplied. Edge lifting is an early warning sign of detachment; catching it at an early stage and addressing it promptly can prevent the issue from worsening.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Bosheng Related Product Recommendations – UV Nail Gel Polish |
||
| Base coat |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-02H |
Phosphate ester acrylate monomer |
Enhance adhesion to substrates such as metal, glass, and plastic. |
| B-2016 |
Polyester acrylate |
High molecular weight, excellent flexibility, strong adhesion, and low heat release. |
| B-2018 |
Aliphatic polyurethane acrylate |
Good adhesion, excellent flexibility, and water resistance. |
| Colored glue |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-151DM |
Modified epoxy acrylate |
Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-162 |
Epoxy acrylate |
Fast curing, low odor, high gloss, and high fullness. |
| B-166A |
Modified epoxy acrylate |
Good flexibility and strong adhesion |
| B-166A-85 |
Modified epoxy acrylate |
Good flexibility, excellent adhesion, contains 15% HEMA. |
| B-166A-85P |
Modified epoxy acrylate |
Good flexibility, excellent adhesion, contains 15% HEMA. |
| B-27 |
Active amine photosensitizing promoter |
Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor |
| B-296 |
Aliphatic polyurethane acrylate |
Fast curing, chemical resistance, yellowing resistance, impact resistance |
| Extended glue |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-210D |
Aliphatic polyurethane acrylate |
Fast curing, low heat of reaction, and excellent toughness. |
| T-2022D |
Aliphatic polyurethane acrylate |
Non-sticky, low heat generation, excellent adhesion, high hardness |
| Sealant adhesive |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-376 |
Aliphatic polyurethane acrylate |
LED yellowing is minimal, and the nail polish formulation exhibits excellent stability. |
| B-412T-6 |
Aliphatic polyurethane acrylate |
Good toughness, free of organotin compounds, and excellent stability of the nail polish formulation. |
| Matte sealant |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-328M |
Aliphatic polyurethane acrylate |
Low gloss, low viscosity, excellent wettability, and a pleasant hand feel. |
| B-328R |
Aliphatic polyurethane acrylate |
Low gloss, excellent matting, good wetting, and a delicate, smooth hand feel. |
| B-329D |
Aliphatic polyurethane acrylate |
Low irritation, low viscosity, excellent wettability, and a pleasant hand feel. |
| One-step adhesive |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-315 |
Aliphatic polyurethane acrylate |
Wear and chemical resistance, high hardness, toughness, and yellowing resistance |
| Type A sheet |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| B-113 |
Bisphenol A epoxy acrylate |
High hardness, high gloss, high fullness, containing 20% TPGDA. |
| B-216 |
Aliphatic polyurethane acrylate |
Fast curing, high fullness, and excellent toughness. |
| B-268M |
Aliphatic polyurethane acrylate |
Good flexibility, excellent adhesion, superior plating performance, and strong hiding power. |
| B-619W |
Aliphatic polyurethane acrylate |
Fast curing, high hardness, excellent toughness, wear resistance, and chemical resistance. |
| Monomer Recommendation |
||
| Product Model/English Abbreviation |
Product Name/Product Type |
Product Features |
| BM1211 (HPMA) |
Hydroxypropyl methacrylate |
HEMA-free, high strength, low irritation, and high adhesion |
Share to:
Related News
Fax: +86 20-3437 9190
Address: 8-9 / F,Building B,Pazhou Science and Technology Park, Xingang East Road, Haizhu District, Guangzhou City, Guangdong Province
Follow us
Copyright © Guangdong Bossin Novel Materials Technology Co., Ltd. All rights reserved.
