The Basis of UV Curing: Photochemical Reactions


Photochemical reactions, also known as photochemical processes, refer to chemical reactions triggered by the action of light—specifically, chemical reactions that occur when substances absorb light energy upon exposure to visible light or ultraviolet radiation. These reactions cover a wide range of processes, including combination, decomposition, ionization, oxidation, and reduction. The two main types of photochemical reactions are photosynthesis and photolysis. The fundamental steps in a photochemical reaction involve the absorption of photons, excitation of electrons, electron relaxation, and subsequent chemical reactions. When an atom, molecule, radical, or ion absorbs a photon—that is, when it is exposed to a light source—it enters an excited state and subsequently undergoes chemical reactions with other substances.

I. Principles of Photochemical Reactions

In natural environments, photochemical reactions are primarily triggered by the excitation caused by sunlight. When substances absorb photons from a light source, their molecules enter specific electronically excited states, thereby initiating chemical reactions with other substances.

A photochemical reaction is a chemical process triggered by the absorption of photons by molecules of a substance. In these reactions, when a molecule absorbs a photon of a specific wavelength, its internal electrons undergo a transition from a lower energy level to a higher energy level, thereby entering an unstable state known as an excited state. Once a molecule reaches this excited state, it may further undergo dissociation or trigger other chemical reactions.

The basic reaction process of a typical photochemical process can be simply expressed as:

(1) The initial molecule (A), upon absorbing the energy of a photon (hv), triggers a reaction that produces an excited-state molecule (A*);

(2) When this excited-state molecule (A*) reaches a sufficiently high energy state, it dissociates to produce several new substances (C1, C2…);

(3) The excited-state molecule A* undergoes a chemical reaction with other molecules (B), giving rise to new substances (D1, D2…);

(4) After losing energy, the excited-state molecule A* returns to its original state (A) while emitting light energy (fluorescence or phosphorescence).

(5) The excited-state molecule A* collides with other chemically inert molecules (M), causing it to lose its excited-state activity and return to the stable ground state.

Reaction (1) is an induced reaction in which molecules or atoms absorb photons, thereby forming an excited state A*. For this reaction (1) to proceed successfully, the energy of the absorbed photon must match or be compatible with the energy difference between the electronic energy levels of the molecule or atom.

When the energy difference between electronic levels in a molecule is large, the molecule typically needs to absorb high-energy light to excite its valence electrons to higher energy states. Such high-energy light usually comes from the far-ultraviolet, ultraviolet, and the high-energy portion of visible light. Therefore, photochemical reactions can only be induced when the wavelength of the light is shorter than 700 nm.

When molecules are excited to a high-energy state, their reactivity is significantly enhanced, potentially triggering a series of complex reactions, including those described in (2) through (4). Among these, reactions (2) and (3) represent two distinct types of chemical reactions initiated by excited-state molecules. Reaction (2) is one of the most common photochemical reactions in the atmosphere, as it can cause excited-state molecules to dissociate into two or more molecules, atoms, or free radicals, thereby promoting the transformation or migration of particulate matter in the atmosphere. In contrast, reactions (4) and (5) are two common mechanisms by which excited-state molecules lose energy; their ultimate outcome is the return of the molecules to their original, stable states.

II. Types of Photochemical Reactions

Photochemical reactions can be classified into adiabatic and nonadiabatic types, depending on the changes in the potential energy surface along the reaction coordinate. In an adiabatic photochemical reaction, the reactants and products must lie on the same physicochemical potential energy surface; in contrast, nonadiabatic reactions involve a process in which the higher-energy potential surface slides down to a lower-energy one.

(1) Adiabatic Photochemical Reaction: In this type of reaction, the reaction takes place within a single, continuously varying potential energy surface. The reactants and products—specifically, the transition state—must be connected, and the product is in an excited state. This means that during the reaction, the system does not exchange heat with its surroundings; in other words, no heat enters or leaves the system. Therefore, an adiabatic process is an isentropic process.

(2) Non-adiabatic photochemical reactions: In non-adiabatic reactions, chemical transformations involve crossing over to another potential energy surface. For instance, in most condensed-phase photochemical reactions, after light excitation, the molecular system slides from a high-energy potential surface down to a lower-energy one and then undergoes a non-radiative transition to the ground state, thereby forming ground-state molecules. This process involves crossing over to another potential energy surface, which is why it is referred to as non-adiabatic.

Based on the criteria mentioned above, in photochemical reactions carried out under adiabatic conditions, there must be a clear correlation among the reactants, products, and even the transition states. When the product is in an excited state, we can detect the presence of this excited state through fluorescence methods or by examining its photochemical behavior.

Typically, the chemical behavior of a ground-state molecule is primarily determined by the properties of its least tightly bound electron. However, when a molecule is in an excited state, its internal energy and the distribution of molecular electron density differ significantly from those of the ground-state molecule, leading to marked differences in the chemical properties of the excited-state molecule compared to the ground-state molecule.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.

Share to:

Related News


Application of UV Surface Treatment Technology in Automotive Interiors

Surface treatment technology, an indispensable component of modern manufacturing, has witnessed humanity’s leap from manual craftsmanship to mechanized and automated production throughout its development. As technology continues to advance, surface treatment processes are constantly being innovated. People have begun to apply micro- and nanotechnology to material surface treatments, giving rise to numerous new surface engineering technologies. These technologies not only significantly enhance the performance of material surfaces but also help achieve goals such as environmental protection and energy conservation, providing strong support for the sustainable development of modern manufacturing. In recent years, the UV texture process, which first gained popularity in the mobile phone industry, has been steadily refined through ongoing technological research and improvement, and is now being adopted in the automotive industry as well. It has won widespread acclaim from both manufacturers and consumers. Of course, the automotive industry has even higher demands when it comes to environmental friendliness and durability.


Unveiling the Frosted Packaging Process Under UV Technology

The matte finishing process is a surface treatment technique that uses specific sanding methods on the surface of packaging boxes to create a directional matte effect. This process softens the glossiness of the packaging box, reduces surface reflection, and gives the packaging a more upscale, sophisticated, and high-end appearance. Depending on customer requirements, different types of abrasive grains, sanding materials, and sanding techniques can be selected to achieve various effects. Thanks to its customization capabilities, the matte finishing process can be applied to objects made from a wide range of materials—including metal, glass, and plastic—meeting the texture demands of different materials. Moreover, the matte finishing process can be tailored to individual design needs, enabling the product surface to exhibit unique effects that better align with personalized preferences.


Analysis of the Types and Selection of Oligomers in Light-Curing Coatings

Light-curing coatings, a special type of coating, have increasingly gained favor in the market due to their environmental friendliness, efficiency, and superior performance. In recent years, they have demonstrated unique advantages and broad application prospects across multiple fields. With their high curing speed, exceptional hardness and abrasion resistance, as well as low volatile organic compound (VOC) emissions, these coatings are gradually becoming the new favorite in the coatings industry.