Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Investigation of UV-Curable Pressure-Sensitive Adhesives
Release time:
2024-04-18 13:39
Pressure-sensitive adhesives, often referred to as PSAs, are a special type of adhesive that bonds to surfaces simply by applying light pressure—no solvents, heat, or other aids are required. They are characterized by their ease of adhesion and effortless removal, and their adhesive layer remains flexible and non-drying over extended periods. PSAs are primarily used as raw materials for manufacturing pressure-sensitive tapes, producing a wide range of PSA products such as adhesive tapes, stickers, adhesive films, and sheets.

I. Types of Pressure-Sensitive Adhesives
Pressure-sensitive adhesives can be classified into two major categories based on their main components: rubber-based and resin-based. Rubber-based adhesives are further divided into natural rubber and synthetic rubber; resin-based adhesives are categorized into polyurethane, acrylate, and silicone types. According to their physical form and dispersion medium, they can be classified as water-soluble pressure-sensitive adhesives, solvent-based pressure-sensitive adhesives, emulsion-type pressure-sensitive adhesives, hot-melt pressure-sensitive adhesives, and calendered pressure-sensitive adhesives.
1. Rubber-based UV-curable pressure-sensitive adhesive
Rubber-based pressure-sensitive adhesives use natural rubber, synthetic rubber, or a combination of both as the main material, and incorporate other auxiliary ingredients, such as: Tackifying resin softener, plasticizer, crosslinking agent, filler, viscosity adjuster, Vulcanizing agent 、 Antioxidant It is formulated by blending with solvents and other ingredients. In the manufacturing process, natural rubber is predominantly used; to further optimize its performance, we typically employ a blend of styrene-butadiene rubber and polyisobutylene for modification. This pressure-sensitive adhesive, based on natural rubber, boasts strong adhesion, excellent low-temperature resistance, and a low cost. It is commonly used in medical adhesive plasters and electrical insulation tapes. However, it has a drawback: it may contain unreacted double bonds that are prone to aging under the influence of light and heat.
Therefore, to improve this situation, the performance is typically enhanced through partial crosslinking modification or grafting modification. In particular, by adding a photosensitizer, pressure-sensitive adhesives can undergo rapid UV-induced crosslinking, thereby achieving superior performance.
2. Acrylate-based UV-curable pressure-sensitive adhesive
Among different types of pressure-sensitive adhesives, acrylic ester pressure-sensitive adhesives based on resins are currently the most widely used, with their production volume surpassing that of natural rubber pressure-sensitive adhesives. Acrylic ester pressure-sensitive adhesives are a special type of pressure-sensitive adhesive that contains no solvents; at high temperatures, they exist as a viscous liquid. When applied to a substrate, their curing process primarily occurs via a photopolymerization reaction induced by UV light irradiation.

II. How to Synthesize UV-Curable Pressure-Sensitive Adhesives
The synthesis of acrylate-based UV-curable pressure-sensitive adhesives can primarily be achieved through the following three approaches:
1. First, carry out bulk polymerization in the extruder, then extrude and coat the material, followed by UV crosslinking and curing.
2. Initial polymerization is carried out in a reactor using solution polymerization, followed by solvent removal under reduced pressure, and then melt coating and UV crosslinking curing at high temperature.
3. First, prepare a monomer slurry of acrylate, then directly coat it onto the substrate and proceed with UV polymerization and crosslinking curing.

III. Advantages and Disadvantages of UV-Curable Pressure-Sensitive Adhesives
UV-curable pressure-sensitive adhesives have the following characteristics compared to other pressure-sensitive adhesives:
1. It possesses excellent performance on its own and does not require the addition of excessive auxiliary ingredients, such as antioxidants.
2. It is resistant to erosion by water, oil, solvents, and other chemicals, exhibits stable performance, and maintains excellent adhesion even after prolonged use.
3. It has a wide bonding range and can effectively bond various materials, such as metals, wood, paper, and more. It is harmless to the skin and can also be used in medical applications.
UV-curable pressure-sensitive adhesives generally contain oligomers, monomers, photoinitiators, and activators. Typically, the photoinitiators added to these formulations have maximum absorption wavelengths in the ultraviolet region between 200 and 400 nm. However, under the following circumstances, such a single photoinitiator often proves insufficient:
1. The visible light portion of the mercury lamp is lost because it cannot be absorbed;
2. When using a laser as the light source, the emission spectrum cannot match well with the absorption spectrum of the sample.
3. When fillers are used in pressure-sensitive adhesives, it is difficult to obtain an effective spectral window.
4. Pressure-sensitive adhesives used outdoors cannot be effectively cured by sunlight; therefore, it is necessary to employ a multi-component photoinitiator system to enhance their initiation efficiency.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 
Share to:
Related News
A Brief Discussion on UV-Curing Inks
UV-curable ink is an ink that undergoes a cross-linking reaction when exposed to ultraviolet (UV) light with a wavelength ranging from 200 to 450 nm. Under the irradiation of UV light, this ink can instantly transform from a liquid state into a solid state; hence, it is also referred to as UV ink. Its main components include prepolymers, monomers, organic pigments, photoinitiators, and additives. UV ink boasts several advantages, such as rapid drying speed, high production efficiency, low curing energy consumption, excellent gloss, superior resistance, no solvent volatilization, and environmental friendliness. As a result, it is increasingly widely adopted in the printing industry and has become a new direction for ink development.
Exploring the Application of Light-Curing in Vacuum Plating
Vacuum plating involves placing the object to be coated into a vacuum chamber and then heating it to a specific temperature, causing the metal or non-metallic material to enter an evaporated state. The evaporated material flies around in the vacuum environment and adheres to the surface of the object being coated. After cooling, a thin film is formed. This deposition process relies on the high-speed movement and collision of particles; therefore, the film deposition rate and film quality in vacuum plating depend on factors such as vacuum quality, material purity, temperature, the distance between the material and the substrate, and the duration of the deposition process.
Fun Facts About the UV Coating on PVC Flooring
PVC flooring is a highly popular new type of lightweight floor covering material, also known as "lightweight flooring." Its primary raw material is polyvinyl chloride, which is processed with additives such as fillers, plasticizers, stabilizers, and colorants. It boasts numerous advantages, including excellent decorative appeal, ease of installation and maintenance, slip resistance, sound absorption, and wear resistance.