Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
A Comprehensive Performance Comparison of Silicone Photocurable Resins
Release time:
2017-08-03 10:06
Introduction
This article presents performance evaluation tests on four silicone UV resins developed by Boxing Company. To help everyone clearly and concisely understand the performance characteristics of these four resins, the tests focus on a parallel comparison of the products’ most fundamental physical properties and performance attributes. We hope these results will be helpful to our customers in selecting the right products and formulating their applications.
I. Resin Appearance
| B-818 | B-828 | B-868 | B-878 | |
| Room temperature | White crystal | Semi-transparent liquid | Transparent liquid | Transparent liquid |
| After heating | Transparent liquid | No change | No change | No change |
II. Functional Degree
| B-818 | B-828 | B-868 | B-878 |
| 6 | 5 | 6 | 3 |
3. Viscosity
| B-818 | B-828 | B-868 | B-878 | |
| cps/30℃ | 6000-12000 | 10,000–20,000 | 17,000–25,000 | 200-300 |
IV. Curing Rate
| mj/cm2 | B-818 | B-828 | B-868 | B-878 |
| 22 | OK | Sticky to the touch | Sticky to the touch | Poor curing |
| 59 | / | OK | OK | Poor curing |
| 400 | / | / | / | Sticky to the touch |
| 800 | / | / | / | OK |
V. Leveling
| B-818 | B-828 | B-868 | B-878 |
| Excellent | Excellent | Excellent | Excellent |
6. Glossiness
| B-818 | B-828 | B-868 | B-878 | |
| Blackboard | 92° | 89° | 88° | 87° |
| Whiteboard | 94° | 91° | 90° | 89° |
7. Hardness
| B-818 | B-828 | B-868 | B-878 | |
| PC board | H | F | F | HB |
8. Yellowing Resistance
| B-818 | B-828 | B-868 | B-878 | |
| 1 UV exposure | Pale yellow | Light yellow | Pale yellow | Pale yellow |
| 10 UV exposures | Yellowish-red hue | Yellowish-red hue | Light yellow | Pale yellow |
9. Resistant to steel wool
| B-818 | B-828 | B-868 | B-878 | |
| 1 kg load | 500 times | <3 times | Less than 5 times | Less than 1 time |
10. Oil-resistant pen
| B-818 | B-828 | B-868 | B-878 |
| 50-100 times | Less than 50 times | 200-300 times | 300–400 times |
11. Adhesion
| B-818 | B-828 | B-868 | B-878 | |
| PC+ABS | 5B | 5B | 5B | 5B |
| PC | 5B | 5B | 5B | 5B |
12. Resistant to boiling water
| 0.5 h/100℃ | B-818 | B-828 | B-868 | B-878 |
| PC+ABS | 5B | 5B | 5B | 5B |
| PC | NG | 5B | NG | 5B |
13. High-temperature baking resistance
| 0.5 h/100℃ | B-818 | B-828 | B-868 | B-878 |
| PC board | Several cracks | Not cracked | Not cracked | Not cracked |

Share to:
Related News
Analysis of the PVC Leather UV Roller-Coating Gloss Finish Project
Polyvinyl chloride, abbreviated as PVC in English, is a polymer formed by the free-radical polymerization of vinyl chloride monomer (VCM) under the initiation of initiators such as peroxides and azo compounds, or through the action of light and heat. Homopolymers and copolymers of vinyl chloride are collectively referred to as vinyl chloride resins.
UV LED Technology and Applications
An UV-LED (or UV Light Emitting Diode) is a solid-state semiconductor device that can directly convert electrical energy into ultraviolet light. It is a type of LED with a wavelength range of 10–400 nm, representing monochromatic invisible light typically below 400 nm. The wavelengths commonly used for curing applications are 365 nm and 395 nm. UV adhesives are generally cured using the 365 nm wavelength.
Applications and Trends of 3D Ceramics in Mobile Phones
Ceramic materials are a class of inorganic, nonmetallic materials made from natural or synthetic compounds through shaping and high-temperature sintering. A ceramic phone back cover is simply a phone back cover crafted from ceramic material. The term "3D" refers to a design that differs from "2D" and "2.5D." All phone back covers have a certain thickness; when the top and bottom surfaces are flat and parallel to each other, it’s referred to as 2D. If the top and bottom surfaces remain flat but the edges are polished into a curved shape that smoothly transitions from one surface to the other, it’s called 2.5D. In contrast, 3D glass no longer has flat top and bottom surfaces—instead, the edges typically feature a significant curvature, giving the entire structure a U-shaped profile.