Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
A Brief Discussion on Dual-Cure Systems
Release time:
2016-08-11 10:50
I. The Origin of Double Curing
Since the curing process of UV-curable systems is initiated by light, UV-curable systems also have the following drawbacks: limited curing depth; difficulty in application to colored systems and opaque materials; and inability to cure objects with excessively complex shapes. To address these limitations, a dual UV-curing system has been developed, which combines UV curing with other curing methods. In this system, the crosslinking or polymerization reaction is accomplished through two independent stages, each operating on a different reaction principle.
UV light is used to rapidly set the system or achieve “surface dryness,” while a dark reaction ensures that the “shaded” areas or inner layers are fully cured, reaching “full dryness.”

In fact, with the advancement of technology, today’s UV LED light-curing machines can, to a certain extent, integrate the functionalities of the aforementioned dual-light curing systems into a single device. The UV light-curing machine launched by Blue Spectrum is precisely such a product: its ultraviolet light reaction ensures that UV inks achieve complete curing. The dual UV light-curing approach expands the application scope of UV-curable adhesives to include bonding between opaque substrates, complex-shaped substrates, ultra-thick adhesive layers, and colored adhesive layers. This innovative system endows UV-curable adhesives with even greater competitiveness.
II. Compared to UV curing
Dual-curing technology is a curing technique that combines UV curing with other curing methods. While UV curing has its own limitations—only areas directly exposed to UV light can be fully cured, and regions out of direct UV exposure are difficult to cure completely—dual-curing approaches leverage the advantages of various polymerization reactions, exhibiting excellent synergistic effects. This represents a novel approach for modifying polymeric materials and can expand the application of UV curing systems to opaque materials, substrates with complex shapes, ultra-thick coatings, and colored coatings.
III. Compared to thermal curing
Using light irradiation can pre-gel the resin, thereby preventing initial viscosity reduction during thermal curing. Additionally, this method eliminates the need for fixtures—first, the resin is fixed by light irradiation, and then it can be fully cured through heating.
In addition, this dual-cure epoxy resin contains a lower content of acrylate monomers compared to conventional acrylate-based photopolymer resins. Even with the addition of only a small amount of free-radical photoinitiator, it exhibits sufficient photocuring performance, thus yielding a highly reliable cured product with minimal volatile gas evolution during curing.
IV. Synthesis of Photothermal Dual-Curing Prepolymers

Using epoxy resin and methacrylic acid as raw materials, a methacrylic epoxy monoester that can be cured both by UV irradiation and thermal curing has been synthesized. Its structure contains both an acrylate C=C double bond and an epoxy group, which helps overcome the incompatibility of system components and avoid uneven local curing.
V. Flowchart of the Double-Cure Experimental Procedure

UV light is used to rapidly set the system or achieve “surface dryness,” while a dark reaction ensures that the “shaded” areas or inner layers are fully cured, reaching “full dryness.”

6. Dual-Cure – Moisture-Cured

VII. Application Fields of Dual-Cure Technology
1. Automotive OEM paint and plastic coatings; 2. General industrial coatings; 3. Automotive touch-up paints; 4. Wood finishes; 5. Building materials.

VIII. Application Examples of Dual-Cure Systems
For bonding between opaque materials, first apply a UV-curable adhesive and expose it to light, then proceed with assembly. After assembly, the adhesive can undergo a dark reaction curing process in the absence of light, ensuring complete curing. Additionally, since free radicals have a relatively short lifespan and their reaction ceases once light is removed, and given that polymerization reactions initiated by free radicals generally proceed at a rapid pace, it is necessary to improve the free-radical curing system. One approach is to use mixed initiators, enabling the system to generate free radicals not only upon exposure to light but also when heated. On the other hand, volatile polymerization inhibitors can be added to the system to slow down the reaction rate during light exposure.
9. Development Prospects of Dual-Cure Systems
Applying dual-curing technology to adhesive development will undoubtedly endow UV-curable adhesives with even greater competitiveness. Thanks to the assistance of dark reactions, dual-curing adhesives can overcome many of the limitations inherent in light-curable adhesives, thereby expanding the application scope of UV-curable adhesives to include bonding between opaque materials, substrates with complex geometries, ultra-thick adhesive layers, and colored adhesive layers. This provides favorable conditions for light-curing bonding of opaque materials or objects with relatively complex shapes. Dual-light-curing adhesives are now being used in fields such as protective coatings, sealing, and high-speed installation. 
Share to:
Related News
Introduction to the UV-CIPP (Ultraviolet Light-Cured In-Place Pipe Repair) Process
After years of operation, various pipelines inevitably suffer from damage and leaks due to factors such as corrosion and poor operational management, leading to significant economic losses. However, replacing the entire pipeline with new ones would not only involve an enormous amount of work but also be costly and time-consuming. Consequently, how to restore pipeline safety efficiently, economically, and quickly has attracted great attention both domestically and internationally. Therefore, research into pipeline repair technologies is of paramount importance.
Encapsulating sealants are used for bonding, sealing, potting, and coating protection of electronic components. Before curing, they exist in a liquid state and exhibit fluidity. The viscosity of the sealant varies depending on the material, performance requirements, and manufacturing process of the product. Encapsulation involves mechanically or manually pouring the liquid composite into devices containing electronic components and circuits, where it cures under ambient or heated conditions to form an excellent thermosetting polymer insulating material with superior performance.
Classification and Properties of Engineering Plastics
Engineering plastics can be further divided into two categories: general-purpose engineering plastics and special-purpose engineering plastics. The former mainly includes five major types of general-purpose engineering plastics: polyamides, polycarbonates, polyformaldehydes, modified polyphenylene ethers, and thermoplastic polyesters. The latter refers primarily to engineering plastics that can withstand temperatures above 150°C; the main varieties include polyimides, polyphenylene sulfides, polysulfones, aromatic polyamides, polyarylates, polybenzoates, polyaryletherketones, liquid-crystal polymers, and fluoropolymers.