News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Advantages and Disadvantages of LCD Light-Curing 3D Printing Technology

Advantages and Disadvantages of LCD Light-Curing 3D Printing Technology

LCD-based stereolithography 3D printing technology, also known as MSLA (Masked Stereolithography), is a 3D printing technique that uses an LCD screen as the light source to cure liquid photopolymer resin layer by layer. With the rapid development of 3D printing technology, LCD-based stereolithography has gradually carved out a niche for itself in the 3D printing market thanks to its unique advantages. However, every technology has its dual nature, and LCD-based stereolithography is no exception.

19

2024

/

10

Control of LCD Light-Curing 3D Printing Quality

Control of LCD Light-Curing 3D Printing Quality

LCD-based light-curing 3D printing technology, as an important technique in the field of 3D printing, has attracted widespread attention and application in recent years. It leverages the imaging principle of liquid crystal displays (LCDs): UV light emitted from an LED array is projected onto the LCD screen, selectively illuminating transparent areas that allow the light to pass through and reach the resin tank, where it is absorbed by the resin, causing the entire layer to solidify instantly. However, to fully realize its potential, it is essential to gain a deep understanding of and effectively control the various factors that influence print quality.

18

2024

/

10

Operating Procedures for LCD Light-Curing 3D Printing

Operating Procedures for LCD Light-Curing 3D Printing

LCD-based stereolithography 3D printing is a type of stereolithography 3D printing technology. It has undergone three major iterations—from SLA (stereolithography) to DLP (digital light processing) and then to LCD (liquid crystal display). In LCD technology, the liquid crystal screen serves as the light-source control device. An array of LEDs emits UV light, which is projected onto the LCD screen to create selectively transparent areas. Light passing through these transparent areas penetrates the LCD screen and irradiates the photosensitive resin in the resin tank, triggering a curing reaction. By layering these cured layers one after another, a complete three-dimensional object is ultimately formed. The operational steps for LCD-based stereolithography 3D printing mainly include four stages: modeling, slicing, printing, and post-processing.

18

2024

/

10

Common accessories for LCD light-curing 3D printing equipment

Common accessories for LCD light-curing 3D printing equipment

The key components of LCD-based photopolymerization 3D printing equipment include the light source board, LCD screen, structural components, and electronic components. These components work together to enable 3D printing functionality. During operation, various accessories are also required to ensure a smooth printing process and maintain high printing quality standards.

15

2024

/

10

Components of LCD Light-Curing 3D Printing Equipment

Components of LCD Light-Curing 3D Printing Equipment

LCD-based photopolymerization 3D printing equipment is a core component of 3D printing technology. It uses ultraviolet light emitted by an LCD screen to cure photosensitive resin materials, layer by layer, ultimately constructing a 3D object. These devices are not only technologically advanced but also typically feature high precision, high resolution, and fast printing speeds. By delving deeply into the equipment and accessories of LCD-based photopolymerization 3D printing—from its core components to its fine-tuned peripherals—we can gain a comprehensive understanding of this technology’s intricacies, enabling us to better select and appreciate LCD 3D printing equipment.

15

2024

/

10

The Origin and Development of LCD Light-Curing 3D Printing

The Origin and Development of LCD Light-Curing 3D Printing

LCD-based stereolithography 3D printing technology, also known as MSLA (Masked Stereolithography), primarily uses a liquid crystal display (LCD) as the light source and combines it with UV-curing technology to solidify liquid photopolymer resin layer by layer. By precisely controlling the projection of UV light onto the LCD screen, this technology cures the designed three-dimensional model layer by layer in the photopolymer resin, ultimately constructing a complete three-dimensional object.

14

2024

/

10

Light-Curing 3D Printing: A Prospective Outlook on DLP Technology

Light-Curing 3D Printing: A Prospective Outlook on DLP Technology

3D printing technology, also known as additive manufacturing technology, is a technique that uses digital model files as a basis and builds three-dimensional objects by adding material layer by layer. In recent years, with the rapid advancement of technology, 3D printing has become an important component in the field of digital manufacturing. Among the various 3D printing technologies, DLP light-curing 3D printing technology has attracted considerable attention due to its high precision, fast printing speed, and wide range of applications.

14

2024

/

10

Light-Curing 3D Printing: Market Applications of DLP Technology

Light-Curing 3D Printing: Market Applications of DLP Technology

Light-curing 3D printing technology—particularly Digital Light Processing (DLP)—is gradually reshaping the manufacturing landscape thanks to its high precision, rapid printing speed, compatibility with a wide range of materials, and broad application fields, which span industrial manufacturing, jewelry and crafts, healthcare, education and research, and many other sectors.

11

2024

/

10

< 1...122123124...154 >