News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

How to Choose a UV Wood Primer (Part 1)

How to Choose a UV Wood Primer (Part 1)

There is a wide variety of UV wood primers, each with distinct functional characteristics and suitable application scenarios. Selecting the appropriate product type is crucial for ensuring coating quality, enhancing production efficiency, and controlling costs. An inappropriate selection can lead to coating defects, process inefficiencies, or resource waste.

30

2026

/

03

Key Points for Applying UV Wood Primer

Key Points for Applying UV Wood Primer

Construction key points refer to the critical factors that require particular attention and stringent control during the application of UV wood primer. Unlike the construction process, which focuses on operational steps, construction key points emphasize the technical parameters and control measures that have a decisive impact on quality. Mastering these key points helps ensure precise control of coating quality in actual production, prevents common defects, and enhances production stability and first-pass yield.

27

2026

/

03

Construction Process for UV Wood Primer

Construction Process for UV Wood Primer

The application process for UV wood primers refers to the entire sequence of operational steps, from the moment the workpiece enters the coating line to the completion of the primer coat. A standardized application procedure is the foundation for ensuring consistent coating quality and meeting production efficiency targets. Unlike traditional solvent-based coatings, the application of UV wood primers involves the unique step of photoinitiated curing, which imposes specific requirements on each stage of the process. Thoroughly understanding and rigorously adhering to the application procedure is crucial for fully realizing the performance characteristics of the primer.

27

2026

/

03

How to evaluate the performance of UV wood primer

How to evaluate the performance of UV wood primer

In wood coating production, the quality of UV wood primers directly affects the final performance and service life of the entire coating system. However, since the primer layer is covered by the topcoat, its properties cannot be directly observed or assessed with the naked eye. Therefore, it is essential to establish a scientific and systematic approach for performance evaluation, enabling objective testing and quantitative analysis of the primer’s various performance indicators. This paper will introduce the commonly used methods for evaluating the performance of UV wood primers from the perspectives of curing performance, physical properties, chemical properties, sealing performance, application performance, and environmental protection performance.

27

2026

/

03

A Brief Discussion on the Characteristics of UV Wood Primer

A Brief Discussion on the Characteristics of UV Wood Primer

UV wood primer is a coating product that cures upon exposure to ultraviolet light. Its curing mechanism, material composition, and application method give it a set of unique characteristics that distinguish it from conventional coatings. These characteristics have led to its widespread use in the industrial coating of wood products.

25

2026

/

03

Performance of UV Wood Primer

Performance of UV Wood Primer

Performance refers to the technical specifications and functional capabilities demonstrated by a product during its use. For UV wood primers, performance encompasses such aspects as the quality of the cured film, adhesion to the substrate, and environmental adaptability. These performance indicators directly determine the quality and service life of the coating system.

25

2026

/

03

Analyzing the Function of UV Wood Primer

Analyzing the Function of UV Wood Primer

In the modern wood-products industry, from furniture and flooring to kitchen cabinets and wooden doors, surface coating is not only a means of imparting aesthetic appeal but also a critical step in protecting the wood and extending product lifespan. Within this intricate coating system, the role of the primer is often the most pivotal—yet it is frequently overlooked. UV wood primers, as a quintessential application of light-curing technology in wood-coating applications, have, thanks to their unique performance advantages, become an indispensable component of efficient, environmentally friendly coating processes for modern wood products.

25

2026

/

03

Introduction to UV Wood Primer

Introduction to UV Wood Primer

In UV wood coating systems, the primer serves as a critical interlayer that bridges the putty layer and the topcoat: it must adhere strongly to both the substrate and the putty layer while providing an ideal substrate for the topcoat. Although the primer itself is not directly visible on the finished surface, its performance directly determines the appearance of the topcoat and the overall quality of the coating system. This article provides a systematic overview of the main types of UV wood primer and their respective characteristics.

24

2026

/

03

< 1...373839...144 >