News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Which substrates are suitable for UV vacuum plating?

Which substrates are suitable for UV vacuum plating?

The UV vacuum plating process can impart a metallic finish to non-metallic substrates such as plastics, offering broad substrate compatibility. Different types of substrates have varying requirements for coating adhesion, heat resistance, and processability, making them suitable for distinct product applications. Understanding the characteristics of each substrate type and its compatibility with vacuum plating is essential for selecting appropriate materials and ensuring high‑quality coating performance.

28

2026

/

05

Coating method of UV vacuum plating

Coating method of UV vacuum plating

In the coating stage of UV vacuum plating, two primary methods are employed: thermal evaporation and magnetron sputtering. These techniques form a metallic thin film on the primer surface, serving as the core step for achieving a metallic luster. Following coating, a UV‑curable topcoat is applied to protect and decorate the metal layer. Each method differs in equipment design, operating principles, coating quality, and application areas, and all are closely linked to the subsequent UV curing process. Understanding the distinctions between these coating approaches enables the selection of an appropriate process route based on product requirements.

28

2026

/

05

How to Choose the Right UV Vacuum Plating Solution (Part 2)

How to Choose the Right UV Vacuum Plating Solution (Part 2)

During the selection of a UV vacuum plating process, in addition to technical considerations, environmental requirements, budget constraints, and the intended application area are equally critical factors. These elements not only affect the economic viability of the process but also determine whether the product can meet market‑entry standards and end‑use performance expectations. Therefore, the selection process should involve a comprehensive evaluation across multiple dimensions, including environmental compliance, cost‑effectiveness, and application‑specific performance.

27

2026

/

05

How to Choose the Right UV Vacuum Plating Solution (Part 1)

How to Choose the Right UV Vacuum Plating Solution (Part 1)

Vacuum plating involves multiple technical steps, with the substrate type and the plating process serving as the fundamental factors that determine the overall process route. Different plastic materials exhibit varying degrees of compatibility with specific plating processes, while the choice of plating method directly impacts both equipment investment and coating quality. When selecting a process, it is essential to consider the substrate’s properties and the process requirements in order to identify a technical solution that best meets the product’s needs.

27

2026

/

05

The Differences Between UV Vacuum Plating and Traditional Vacuum Plating

The Differences Between UV Vacuum Plating and Traditional Vacuum Plating

After years of development, vacuum plating technology has evolved into two primary process routes: conventional thermal-curing vacuum plating and UV‑cured vacuum plating. These approaches differ significantly in their curing mechanisms, coating systems, performance characteristics, and application areas. Conventional vacuum plating uses thermally curable coatings that harden under heat, whereas UV‑cured vacuum plating employs ultraviolet‑curable coatings that achieve rapid curing upon exposure to UV light. Understanding the distinctions between these two processes enables users to select the most appropriate route based on product requirements.

27

2026

/

05

Visual Differences Between Conventional Vacuum Plating and UV Vacuum Plating

Visual Differences Between Conventional Vacuum Plating and UV Vacuum Plating

After years of development, vacuum plating technology has evolved into two primary process routes: conventional thermal-curing vacuum plating and UV‑curing vacuum plating. These two approaches exhibit distinct visual characteristics. Conventional vacuum plating relies on thermally cured coating systems, while UV‑curing vacuum plating centers on ultraviolet‑curable coatings. From gloss level and color richness to surface smoothness and durability, each process delivers a unique aesthetic profile. Understanding these differences enables designers to select the most appropriate process based on product positioning and design requirements.

26

2026

/

05

UV vacuum plating with diverse visual effects

UV vacuum plating with diverse visual effects

UV vacuum plating technology can impart a metallic finish to non-metallic substrates such as plastics, with visual effects that are far from uniform or static. Conventional vacuum plating delivers a bright silver appearance, characterized by a high-gloss, mirror-like metallic sheen. Building on this foundation, additional topcoat coloring and specialized processing enable a wide array of visual effects, including shimmering silver, matte silver, magical blue, crackle, water‑drop silver, and iridescent hues. This rich palette of color options gives UV vacuum plating greater design flexibility in applications such as cosmetic packaging and consumer electronics.

26

2026

/

05

What are the applications of UV vacuum plating?

What are the applications of UV vacuum plating?

UV vacuum plating technology can impart a high-gloss, metallic finish to non-metallic substrates such as plastics, while offering environmental benefits and high efficiency, making it widely adopted across numerous manufacturing sectors. From everyday cosmetic packaging to automotive components, and from consumer electronics to beverage containers, UV vacuum plating has become a key technological pathway for achieving metallic decorative finishes on plastic products.

26

2026

/

05

< 1...232425...144 >