News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

The Functions of UV 3C Coatings (Part II)

The Functions of UV 3C Coatings (Part II)

As the performance of consumer electronics continues to improve, surface coatings now extend far beyond their traditional roles of protection and decoration. From the smooth touch experience of displays to outdoor readability, from seamless wireless signal transmission to additional features like antibacterial and self‑healing properties, UV‑curable 3C coatings are enhancing user experience in increasingly diverse ways.

15

2026

/

06

The Functions of UV 3C Coatings (Part 1)

The Functions of UV 3C Coatings (Part 1)

In today’s world, where consumer electronics are ubiquitous in everyday life, the surfaces of devices such as smartphones, laptops, and tablets must not only look aesthetically pleasing but also withstand the rigors of daily use. UV 3C coatings are the key materials that meet this challenge. Leveraging ultraviolet curing technology, they form a dense, protective, and decorative layer on the exterior of electronic products, delivering multifaceted functional benefits. Understanding the role of UV 3C coatings helps illuminate the technological foundations that underpin the surface quality of modern electronics.

12

2026

/

06

The Development of UV 3C Coatings

The Development of UV 3C Coatings

The evolution of UV 3C coatings reflects a mutually reinforcing, co‑evolving relationship between ultraviolet curing technology and the demands of the consumer electronics industry. From the inception of photopolymerization to its widespread adoption today for surface finishing across diverse electronic products, UV 3C coatings have undergone a complete transformation—from laboratory research to large‑scale industrial application. Throughout this journey, generational advances in curing technologies, the impetus of environmental regulations, and the continuous evolution of end‑product form factors have collectively shaped the current technological landscape of UV 3C coatings.

12

2026

/

06

What is UV 3C coating?

What is UV 3C coating?

In today’s world, where consumer electronics are ubiquitous in everyday life, the surfaces of devices such as smartphones, laptops, tablets, and smartwatches must not only deliver an aesthetically pleasing appearance but also resist scratches, fingerprints, and chemical degradation encountered during daily use. Achieving these performance attributes relies heavily on a specialized coating—UV 3C coating. Leveraging UV‑curing technology, this material forms a protective and decorative layer on the exterior of electronic products, making it the mainstream surface‑treatment solution across the 3C industry.

12

2026

/

06

Common Issues and Countermeasures in UV Vacuum Plating (Part 12)

Common Issues and Countermeasures in UV Vacuum Plating (Part 12)

In the practical production of UV vacuum plating, reduced adhesion under humid‑hot conditions is a common issue in applications—such as automotive components—that demand high durability. After exposure to high‑temperature, high‑humidity testing, the coating may exhibit blistering, delamination, or a marked decline in adhesion. While these defects may remain undetectable under normal environmental conditions, they become rapidly apparent in humid‑hot environments. To address this adhesion‑loss problem, a systematic approach is required, encompassing measures such as enhancing interfacial water resistance, increasing the crosslink density of the coating, improving the barrier performance of the topcoat, and providing adequate protection for the plated layer.

11

2026

/

06

Common Issues and Solutions in UV Vacuum Plating (Part 11)

Common Issues and Solutions in UV Vacuum Plating (Part 11)

In the practical production of UV vacuum plating, coating pinholes are one of the common defects that compromise the density and surface quality of the deposited film. These pinholes appear as tiny, circular voids on the coated surface, penetrating the entire coating layer and exposing the underlying primer or substrate. Not only do they disrupt the continuity of the metallic luster, but they also serve as pathways for the ingress of moisture and contaminants. To address this defect, a systematic approach is required, encompassing multiple aspects such as primer sealing, substrate preparation, curing control, and plating process optimization.

11

2026

/

06

Common Issues and Solutions in UV Vacuum Plating (Part 10)

Common Issues and Solutions in UV Vacuum Plating (Part 10)

In the practical production of UV vacuum plating, poor weather resistance is a critical issue that compromises the long-term performance of products. This deficiency manifests as yellowing, loss of gloss, chalking, or corrosion of the coating after a period of use, particularly in outdoor applications or products exposed to prolonged sunlight. Such defects are often not readily apparent at the time of shipment but gradually emerge during service. To address this problem, a systematic approach is required, encompassing improvements to the topcoat formulation, control of the curing process, protection of the plated layer, and design for environmental adaptability.

11

2026

/

06

Common Issues and Solutions in UV Vacuum Plating (Part 9)

Common Issues and Solutions in UV Vacuum Plating (Part 9)

In the practical production of UV vacuum plating, substrate exposure is one of the common defects that compromise both the product’s appearance and its protective performance. Substrate exposure manifests as a loss of the coating layer at the edges and sharp corners of the workpiece, revealing the underlying primer or the bare substrate and creating a stark contrast with the coated areas. To address this defect, a systematic approach is required, encompassing aspects such as shadow‑masking control during vacuum deposition, fixture design, spray‑coating processes, and surface‑treatment techniques, in order to effectively eliminate coating deficiencies and ensure a flawless finished appearance.

09

2026

/

06

< 1...192021...144 >