News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Common Defects in UV Wood Coatings (Part 9)

Release time:

2026-03-16 23:14

Common Defects in UV Wood Coatings (Part 9)

In the field of wood coatings, UV wood finishes have become the preferred choice for many manufacturers thanks to their rapid curing, environmental friendliness, and high efficiency. They not only impart an aesthetically pleasing appearance to wood products but also provide excellent protective performance. However, in practical applications, UV wood finishes are not always flawless; one of the more challenging issues is brittleness caused by inadequate curing. A brittle coating film not only detracts from the overall aesthetic appeal of the product but also severely compromises its functional performance and durability, posing significant challenges for manufacturers. Therefore, a thorough investigation into the phenomenon of brittleness resulting from poor curing in UV wood coatings—and the underlying causes—is of great practical significance for resolving this problem and enhancing product quality.

I. Description of the Phenomenon

Although the paint film achieves the required hardness after curing, it lacks adequate toughness. When struck or scratched with a sharp object, the film readily develops cracks that radiate outward or form a network pattern. During handling, assembly, or service, even minor impacts can cause chipping at the edges or at the point of impact, leading to flaking and spalling of small fragments. When the workpiece is bent or subjected to compressive deformation, the paint film cracks accordingly, with the fissures typically oriented perpendicular to the direction of the applied load. In subsequent machining operations such as sawing or mortise-and-tenon jointing, the paint film along the cut edges tends to flake off in large pieces. Although the surface gloss of a brittle paint film may appear normal, applying firm pressure with a fingernail will produce a faint cracking sound. Under microscopic examination, a fine network of microcracks can often be observed within the paint film itself.

II. In-depth Analysis of the Root Causes

1. Excessive energy

When the UV energy exceeds the critical threshold required for coating formulation, the crosslink density becomes excessively high, resulting in an over-dense three-dimensional network. In such a network, segmental chain mobility is severely restricted, causing the paint film to lose its ability to absorb and dissipate impact energy, thereby becoming rigid and brittle.

2. Accumulation of Shrinkage Stress

UV curing is the rapid transformation of liquid monomers into a solid polymer, accompanied by volumetric shrinkage. If a single coat is applied too thickly, this volumetric shrinkage cannot be compensated by the flow of the coating film, resulting in substantial tensile internal stresses within the film. Even the slightest external force can then trigger cracking.

When the shrinkage and flexibility of the primer and topcoat are mismatched, shear stress develops at the interface, which can likewise lead to brittle cracking of the topcoat.

3. Formulation Factors

The coating formulation contains an excessively high proportion of rigid components and an insufficient proportion of flexible components, or an excessive amount of crosslinking agents resulting in overly dense crosslinking points.

III. Conclusion

The issue of poor curing and embrittlement in UV wood coatings arises from the combined effects of multiple factors, including UV energy, shrinkage stress, and formulation. From precisely controlling UV energy to prevent excessive crosslinking caused by overintensity, to appropriately optimizing coating thickness to minimize the buildup of shrinkage stress, and further to refining the coating formulation to strike a balance between rigid and flexible components, each step must be handled with meticulous care. Only by comprehensively understanding these influencing factors and implementing practical, effective improvement measures can we effectively address the problem of poor curing and embrittlement in UV wood coatings, ensure the production of paint films with excellent toughness and durability, provide reliable protection for wood products, enhance product competitiveness in the market, and drive the wood coating industry toward higher quality standards.

Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove it promptly.

Bossin Recommended Products – UV Wood Coatings
Putty primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Sanding primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Apply primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-02	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
White primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Gloss topcoat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-609	Aliphatic polyurethane acrylate	Fast curing, high hardness, scratch resistance, and chemical resistance.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-910A2	Aliphatic polyurethane acrylate	Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Matte topcoat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-333	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, good wetting properties, and excellent flexibility.
B-572	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-650A	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, fast curing, and good wettability.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-910A2	Aliphatic polyurethane acrylate	Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Bright White Finish
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Adherent
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-509B	Polyester acrylate	Good adhesion, good flexibility, and excellent pigment wetting.
B-531	Polyester acrylate	Good adhesion, impact resistance, excellent flexibility, and yellowing resistance.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
B-590	Polyester acrylate	Excellent adhesion, rapid curing, and good pigment wetting.
Filler type
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
Color correction
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Harden
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Matte
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-329D	Aliphatic polyurethane acrylate	Low irritation, low viscosity, excellent wettability, and a pleasant feel.
B-333	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, good wetting properties, and excellent flexibility.
B-650A	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, fast curing, and good wettability.
Solid-color paint
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-519	Self-curing polyester acrylate	Self-initiated photopolymerization performance
B-530	Polyester acrylate	Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Yellowing resistance
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-431	Cycloaliphatic Specialty Acrylates	Yellowing resistance, excellent wettability, low viscosity, and fast curing
Dip coating
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
Roll coating
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-100	Bisphenol A epoxy acrylate	High hardness, high gloss, excellent chemical resistance, and high fullness.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Solvent-free spraying
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-251	Aromatic Polyurethane Acrylate	Fast curing, excellent flexibility, and good wetting of black ink pigments.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
LED-UV
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-27	Active amine photosensitizing promoter	Low color number, benzene-free, low odor, antioxidant and anti-polymerization
B-570	Polyester acrylate	Low viscosity, benzene-free, low odor, suitable for LED UV
B-574	Polyester acrylate	Benzene-free, low odor, and VOC levels meet cigarette pack standards.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
Excimer lamp
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
Skin feel
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
Single-item recommendation
Product Model/English Abbreviation	Product Name/Product Type	Product Features
BM2223 (TPGDA)	Di(propylene glycol) diacrylate	Good flexibility and low volatility
BM2224 (EO-HDDA)	Ethoxylated 1,6-hexanediol diacrylate	Good adhesion to plastics, good dilutability, and low volatility.
BM3231 (TMPTA)	Trimethylolpropane triacrylate	High crosslink density, high hardness, high gloss, and excellent wear resistance.
BM3235 (PET3A)	Pentaerythritol triacrylate	Fast curing, high crosslink density, high hardness, and excellent chemical resistance.
BM3380 (3EO-TMPTA)	Tripropylene Glycol Triacrylate	More flexible and less irritating than TMPTA.
BM6261 (DPHA-80)	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.
BM6263 (DPHA-90)	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.

Share to:

Common Defects in UV Wood Coatings (Part 10)

Common Defects in UV Wood Coatings (Part 8)