-
Product Center
-
-
Contact Us
Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
What Are the Types of UV Wood Coatings (Part 4)?
Release time:
2026-03-24 17:28
With the continuous upgrading of consumer demand and ongoing technological innovation, the functional integration of UV wood coatings is becoming increasingly sophisticated. Ranging from basic protective properties to specialized features such as yellowing resistance, antibacterial performance, excimer technology, and graffiti resistance, functional UV wood coatings are continually expanding their application scope to meet a wide variety of usage scenarios. This article primarily introduces the main types of special-function UV coatings.
I. Yellowing-Resistant UV Coating
The yellowing-resistant UV coating is formulated with an aliphatic polyurethane acrylate system, which contains no benzene-ring structures prone to yellowing. It also incorporates UV absorbers and hindered amine light stabilizers, ensuring that the coating film remains clear and transparent even after prolonged use. This product is ideal for applications with stringent yellowing-resistance requirements, such as light-colored wood veneers, white furniture, and outdoor wood products, significantly extending product service life and maintaining aesthetic appeal.
II. Antibacterial UV Paint
Antibacterial UV coatings incorporate antimicrobial agents such as nano-silver ions and nano-zinc oxide, endowing the coating with long-lasting inhibitory activity against common pathogenic bacteria. These antimicrobial agents release their active ingredients slowly within the coating, delivering significant inhibition of bacteria like Escherichia coli and Staphylococcus aureus. This product is suitable for applications with stringent hygiene requirements, including children’s furniture, kitchen cabinets, hospital furnishings, and public-health facilities; certain formulations also inhibit mold growth.
III. Excimer UV Coating
Excimer UV coatings utilize 172 nm or 254 nm excimer light sources for surface curing, inducing extremely slight shrinkage in the topcoat layer and thereby forming a nanoscale wrinkled structure. This technology achieves an ultra-matte finish without the addition of matting agents, while the surface wrinkling imparts outstanding anti-fingerprint performance. The coated surface feels warm and smooth to the touch, with a silky softness reminiscent of baby skin, and exhibits excellent scratch resistance. It is widely used in high-end furniture, skin-touch door panels, and other applications.
IV. UV Wood Wax Oil
UV wood wax oil delivers performance that surpasses traditional wood wax oils by leveraging UV curing technology. While preserving the natural texture and open-pore structure of wood, it offers significantly superior physicochemical properties. This product boasts exceptional scratch resistance, water resistance, and stain resistance, along with high application efficiency and zero odor after curing. It is widely used in solid-wood furniture, wooden toys, wood crafts, and other products that emphasize a natural aesthetic.
V. Anti-Graffiti UV Coating
Anti-graffiti UV coating achieves excellent anti-adhesion and easy-clean properties by precisely controlling the surface energy of the coating, making it highly resistant to stains such as oil-based pen marks, coffee spills, and soy sauce. Contaminants struggle to adhere to the coating surface, and any that do stick can be effortlessly wiped away. This product is ideal for households with children, restaurant furnishings, office furniture, and other environments prone to staining.
VI. Conclusion
Special-function UV coatings represent a key direction in the advancement of UV wood-coating technology. Yellowing-resistant UV coatings ensure the long-term aesthetic appeal of light-colored wood products and outdoor applications; antibacterial UV coatings meet the health requirements of hygiene-sensitive environments; excimer UV coatings deliver a perfect balance of ultra-matte finish and a skin-like tactile experience; UV wood-wax oils preserve the natural texture while enhancing durability; and graffiti-resistant UV coatings address the need for easy cleaning in everyday use. These functional formulations continually expand the application scope of UV wood coatings, providing tailored solutions for diverse settings.
Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Bossin Recommended Products – UV Wood Coatings | ||
Putty primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
Sanding primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
Apply primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-02 | Phosphate ester acrylate | Enhances adhesion to substrates such as metal, glass, and plastic. |
B-05 | Phosphate ester acrylate | Enhances adhesion to substrates such as metal, glass, and plastic. |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
B-535 | Polyester acrylate | Excellent adhesion, rapid curing, good flexibility, and yellowing resistance. |
B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
White primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
B-529 | Polyester acrylate | Good adhesion, low shrinkage, and excellent resin compatibility. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting |
Gloss topcoat | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion |
B-21C | Active amine photosensitizing promoter | Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate |
B-301 | Aromatic Polyurethane Acrylate | Fast curing, good toughness, and excellent grindability. |
B-302 | Aromatic Polyurethane Acrylate | Fast curing, high strength, good toughness, and excellent grindability. |
B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
B-601 | Aromatic Polyurethane Acrylate | High hardness, scratch resistance, chemical resistance, and excellent cost performance. |
B-609 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch resistance, and chemical resistance. |
B-868 | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-910A2 | Aliphatic polyurethane acrylate | Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and wear resistance. |
Matte topcoat | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-21C | Active amine photosensitizing promoter | Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate |
B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, excellent wettability, and a pleasant hand feel. |
B-328R | Aliphatic polyurethane acrylate | Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel. |
B-333 | Aliphatic polyurethane acrylate | Low viscosity, excellent matting performance, good wetting, and good flexibility. |
B-572 | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
B-650A | Aliphatic polyurethane acrylate | Low viscosity, excellent matting effect, fast curing, and good wettability. |
B-868 | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-910A2 | Aliphatic polyurethane acrylate | Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and wear resistance. |
Bright White Finish | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
B-301 | Aromatic Polyurethane Acrylate | Fast curing, good toughness, and excellent grindability. |
B-302 | Aromatic Polyurethane Acrylate | Fast curing, high strength, good toughness, and excellent grindability. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting |
B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
B-601 | Aromatic Polyurethane Acrylate | High hardness, scratch resistance, chemical resistance, and excellent cost performance. |
B-868 | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and wear resistance. |
Adherent | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-05 | Phosphate ester acrylate | Enhances adhesion to substrates such as metal, glass, and plastic. |
B-509B | Polyester acrylate | Good adhesion, good flexibility, and excellent pigment wetting. |
B-531 | Polyester acrylate | Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
B-535 | Polyester acrylate | Excellent adhesion, rapid curing, good flexibility, and yellowing resistance. |
B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
B-590 | Polyester acrylate | Excellent adhesion, rapid curing, and good pigment wetting. |
Filler type | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
B-529 | Polyester acrylate | Good adhesion, low shrinkage, and excellent resin compatibility. |
Color correction | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting |
Harden | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-301 | Aromatic Polyurethane Acrylate | Fast curing, good toughness, and excellent grindability. |
B-302 | Aromatic Polyurethane Acrylate | Fast curing, high strength, good toughness, and excellent grindability. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting |
B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
B-601 | Aromatic Polyurethane Acrylate | High hardness, scratch resistance, chemical resistance, and excellent cost performance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and wear resistance. |
Matte | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, excellent wettability, and a pleasant hand feel. |
B-328R | Aliphatic polyurethane acrylate | Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel. |
B-329D | Aliphatic polyurethane acrylate | Low irritation, low viscosity, excellent wettability, and a pleasant feel. |
B-333 | Aliphatic polyurethane acrylate | Low viscosity, excellent matting performance, good wetting, and good flexibility. |
B-650A | Aliphatic polyurethane acrylate | Low viscosity, excellent matting effect, fast curing, and good wettability. |
Solid-color paint | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-519 | Self-curing polyester acrylate | Self-initiated photopolymerization performance |
B-530 | Polyester acrylate | Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting |
Yellowing resistance | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
B-431 | Cycloaliphatic Specialty Acrylates | Yellowing resistance, excellent wettability, low viscosity, and fast curing |
Dip coating | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
Roll coating | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-100 | Bisphenol A epoxy acrylate | High hardness, high gloss, excellent chemical resistance, and high fullness. |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness. |
Solvent-free spraying | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-251 | Aromatic Polyurethane Acrylate | Fast curing, excellent flexibility, and good wetting of black ink pigments. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective |
B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
LED-UV | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-21C | Active amine photosensitizing promoter | Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate |
B-27 | Active amine photosensitizing promoter | Low color number, benzene-free, low odor, antioxidant and anti-polymerization |
B-570 | Polyester acrylate | Low viscosity, benzene-free, low odor, suitable for LED UV |
B-574 | Polyester acrylate | Benzene-free, low odor, and VOC levels meet cigarette pack standards. |
B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
Excimer lamp | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-241 | Aliphatic polyurethane acrylate | Fast curing, excellent skin feel, and yellowing resistance. |
Skin feel | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, contains 20% TPGDA |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion |
B-241 | Aliphatic polyurethane acrylate | Fast curing, excellent skin feel, and yellowing resistance. |
B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, excellent wettability, and a pleasant hand feel. |
B-328R | Aliphatic polyurethane acrylate | Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel. |
B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability; suitable for LED UV. |
B-868 | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon UV-Curable Resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
Single-item recommendation | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
BM2223 (TPGDA) | Di(propylene glycol) diacrylate | Good flexibility and low volatility |
BM2224 (EO-HDDA) | Ethoxylated 1,6-hexanediol diacrylate | Good adhesion to plastics, good dilutability, and low volatility. |
BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
BM3235 (PET3A) | Pentaerythritol triacrylate | Fast curing, high crosslink density, high hardness, and excellent chemical resistance. |
BM3380 (3EO-TMPTA) | Tripropylene Glycol Triacrylate | More flexible and less irritating than TMPTA. |
BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
Share to:
Related News
Fax: +86 20-3437 9190
Address: 8-9 / F,Building B,Pazhou Science and Technology Park, Xingang East Road, Haizhu District, Guangzhou City, Guangdong Province
Follow us
Copyright © Guangdong Bossin Novel Materials Technology Co., Ltd. All rights reserved.
