A Brief Discussion on the Characteristics of UV Wood Primer


UV wood primer is a coating product that cures upon exposure to ultraviolet light. Its curing mechanism, material composition, and application method give it a set of unique characteristics that distinguish it from conventional coatings. These characteristics have led to its widespread use in the industrial coating of wood products.

I. Curing Characteristics

1. Fast curing speed

Under UV irradiation, the photoinitiator in the UV wood primer absorbs light energy and decomposes to generate free radicals or cations, instantly initiating the polymerization of the resin and reactive diluent. This curing process is completed within a few seconds, transforming the liquid coating into a solid paint film. The curing speed is significantly faster than the natural drying or thermal curing processes used for conventional coatings.

2. Low curing temperature

UV wood primer cures at room temperature, eliminating the need for heat curing. Wood is prone to deformation, cracking, and surface degradation at elevated temperatures; however, the low-temperature curing characteristic of UV technology prevents these issues, thereby ensuring dimensional stability and structural integrity of wood products.

3. Strong controllability of curing

The UV curing process relies on the input of ultraviolet light energy. By adjusting the light source power, irradiation time, and conveyor speed, the degree of cure can be precisely controlled. The curing equipment features rapid on/off response, eliminating the need for preheating or heat retention, which facilitates production scheduling.

II. Environmental Protection Features

1. Low volatile organic compound emissions

UV wood primers are characterized by their high solids content, with many formulations containing virtually no volatile solvents. Unlike conventional solvent-based primers, which release substantial amounts of organic solvents into the atmosphere during drying, UV primers generate almost no volatile organic compound emissions during application and curing.

2. High material utilization

For application methods such as roll coating and curtain coating, any coating that does not adhere to the workpiece surface can be recovered and recycled, thereby reducing coating waste. Moreover, since the curing process does not involve solvent evaporation, the coating exhibits low volumetric shrinkage, requiring a smaller coating application per unit film thickness and thus achieving material savings.

III. Construction Characteristics

1. Diverse construction methods

UV wood primers can be applied using different methods depending on the product form and production scale. Roller coating is suitable for continuous production of flat panels, offering high efficiency and uniform film application. Spray coating can effectively cover irregular surfaces and complex geometries, providing excellent adaptability. Dip coating demonstrates excellent leveling properties when used for large-area, flat-surface applications.

2. Excellent leveling performance

UV wood primer exhibits excellent leveling properties after application, allowing it to spread evenly before curing, thereby eliminating application marks and producing a smooth coating surface. This characteristic provides a uniform substrate for the subsequent topcoat application.

3. Excellent polishing performance

After curing, the UV wood primer forms a coating with moderate hardness and excellent sandability. Following sanding, the coating surface develops a fine matte texture that effectively eliminates minor defects introduced during the application process while providing an ideal physical bonding interface for the topcoat.

IV. Conclusion

The key characteristics of UV wood primers include rapid curing, low curing temperature, reduced volatile organic compound emissions, versatile application methods, excellent leveling properties, and good sandability. These attributes confer a prominent role for UV primers in the industrial coating of wood products. At the same time, an understanding of their technical limitations helps ensure appropriate selection based on specific product configurations and production conditions.

Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove it promptly.

Bossin Recommended Products – UV Wood Coatings

Putty primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

Sanding primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-163

Modified epoxy acrylate

Good flexibility, excellent pigment wetting, and strong adhesion.

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

Apply primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-02

Phosphate ester acrylate

Enhances adhesion to substrates such as metal, glass, and plastic.

B-05

Phosphate ester acrylate

Enhances adhesion to substrates such as metal, glass, and plastic.

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-165

Modified epoxy acrylate

Good flexibility and strong adhesion

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

B-535

Polyester acrylate

Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.

B-546

Polyester acrylate

Good adhesion, fast curing, and excellent flexibility.

White primer

Product Model/English Abbreviation

Product Name/Product Type

Product Features

B-113

Bisphenol A epoxy acrylate

High hardness, high gloss, high fullness, contains 20% TPGDA

B-160D

Modified epoxy acrylate

Good flexibility, yellowing resistance, and excellent adhesion.

B-520

Polyester acrylate

Low viscosity, high gloss, excellent wettability, and cost-effective

B-522

Polyester acrylate

Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.

B-529

Polyester acrylate

Good adhesion, low shrinkage, and excellent resin compatibility.

B-560

Polyester acrylate

Fast curing and excellent pigment wetting

Single-item recommendation

Product Model/English Abbreviation

Product Name/Product Type

Product Features

BM2223 (TPGDA)

Di(propylene glycol) diacrylate

Good flexibility and low volatility

BM2224 (EO-HDDA)

Ethoxylated 1,6-hexanediol diacrylate

Good adhesion to plastics, good dilutability, and low volatility.

BM3231 (TMPTA)

Trimethylolpropane triacrylate

High crosslink density, high hardness, high gloss, and excellent wear resistance.

BM3235 (PET3A)

Pentaerythritol triacrylate

Fast curing, high crosslink density, high hardness, and excellent chemical resistance.

BM3380 (3EO-TMPTA)

Tripropylene Glycol Triacrylate

More flexible and less irritating than TMPTA.

BM6261 (DPHA-80)

Dipentaerythritol hexaacrylate

High crosslink density, high hardness, chemical and wear resistance, and water resistance.

BM6263 (DPHA-90)

Dipentaerythritol hexaacrylate

High crosslink density, high hardness, chemical and wear resistance, and water resistance.

Share to:

Related News